Fatigue-creep damage interaction model of asphalt mixture under the semi-sine cycle loading
Source abstract
Abstract
Abstract To describe the interaction of fatigue-creep damage of an asphalt mixture under the action of semi-sine cyclic loading reasonably, a direct tension fatigue test was carried out under four different stress levels (0.5, 1, 1.5, and 2 MPa) based on the fact that semi-sine fatigue stress can be decomposed into creeping stress and simple fatigue stress. In addition, tension-compression fatigue and static creep tests were carried out under four stress levels: 0.25, 0.5, 0.75, 1 MPa. For each test, five parallel tests were carried out at the same stress level. The Chaboche fatigue damage model and Kachanov creep damage model were employed to evaluate the damage evolution of the mixture both in the fatigue and creep tests. According to the test results, the damage evolution trends were revealed under different test processes and stress levels, and the damage evolution models of three different test methods were obtained. Then, based on the principle of semi-sine fatigue stress decomposition, a fatigue-creep damage interaction model considering the interaction of fatigue and creep damage was established using normalized parameters (X = N/Nf = t/tR) as the intermediate variable. The results indicated that the damage of asphalt mixture under the action of the semi-sine cyclic load was not a simple linear accumulation of fatigue damage and creep damage, but an overall result of the interaction of fatigue damage, creep damage, and fatigue-creep damage. The fatigue-creep damage interaction model provided a good fit with the experimental data and showed a high degree of consistency with the classical damage model. The model could be used to describe the damage evolution trend of asphalt mixture under the action of semi-sine cycle load and the interaction effect of fatigue damage and creep damage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Fatigue and fracture mechanics · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Effect of aggregate type on the fatigue durability of asphalt mixtures10.1016/j.conbuildmat.2019.07.064 ↗
2. Research on the anti-icing properties of silicone modified polyurea coatings (SMPC) for asphalt pavement10.1016/j.conbuildmat.2019.117793 ↗
3. The fatigue behavior of SBS/nanosilica composite modified asphalt binder and mixture10.1016/j.conbuildmat.2019.116796 ↗
4. Effect of anisotropic characteristics on the mechanical behavior of asphalt concrete overlay10.1007/s11709-018-0476-4 ↗
5. Synergy effect of attapulgite, rubber, and diatomite on organic montmorillonite-modified asphalt10.1061/(ASCE)MT.1943-5533.0002601 ↗
6. Nonlinear fatigue damage model of asphalt mixture based on dynamic modulus and residual strength decay10.3390/ma12142236 ↗
7. Homogeneity evaluation of hot in-place recycling asphalt mixture using digital image processing technique10.1016/j.jclepro.2020.120524 ↗
8. Fatigue properties of nano-reinforced bituminous mixtures: a viscoelastic continuum damage approach10.1016/j.ijprt.2018.04.004 ↗
9. Analytical solution for the effect of anisotropic layers/ interlayers on an elastic multi-layered medium subjected to moving load10.1016/j.ijsolstr.2019.05.021 ↗
10. Estimation of asphalt concrete fatigue curves – A damage theory approach10.1016/j.conbuildmat.2007.01.012 ↗
11. A review of fatigue damage in bituminous mixtures: understanding the phenomenon from a new perspective10.1016/j.conbuildmat.2016.03.126 ↗
12. New phenomenological approach for modeling fatigue life of asphalt mixes10.1016/j.conbuildmat.2016.05.147 ↗
13. Aging-effect incorporation into the fatigue-damage modeling of asphalt mixtures using the S-VECD model10.1061/(ASCE)MT.1943-5533.0001676 ↗
14. A novel method for evaluating hot mix asphalt fatigue damage: X-ray computed tomography10.1016/j.conbuildmat.2016.03.030 ↗
15. Investigation on fatigue damage of asphalt mixture with different air-voids using microstructural analysis10.1016/j.conbuildmat.2016.08.138 ↗
16. Development of probabilistic fatigue curve for asphalt concrete based on viscoelastic continuum damage mechanics10.1016/j.ijprt.2016.07.004 ↗
17. Probabilistic viscoelastic continuum damage analysis of fatigue life of warm-mix asphalt
18. Probabilistic characterisation of damage characteristic curve of asphalt concrete mixtures10.1080/10298436.2017.1321420 ↗
19. Fatigue damage analysis of an asphalt mixture based on pseudostiffness10.1007/s11223-018-0021-7 ↗
20. Use of indirect tension test and viscoelastic continuum damage theory for fatigue characterization of asphalt mixtures10.1016/j.conbuildmat.2018.07.191 ↗
21. Use of viscoelastic continuum damage theory to correlate fatigue resistance of asphalt binders and mixtures10.1061/(ASCE)GM.1943-5622.0001306 ↗
22. Characterization of fatigue damage of hot mix asphalt based on residual strength10.1061/(ASCE)MT.1943-5533.0001908 ↗
23. Fatigue damage model of stone matrix asphalt with polymer modified binder based on tensile strain evolution and residual strength degradation using digital image correlation methods10.1016/j.measurement.2018.03.037 ↗
24. Impact of nanosized additives on the fatigue damage behaviour of asphalt mixtures10.1111/ffe.13110 ↗
25. Fatigue damage evolution model of asphalt mixture considering influence of loading frequency10.1016/j.conbuildmat.2019.05.029 ↗
26. Characterization of fatigue damage mechanism of asphalt mixtures with acoustic emission10.1016/j.conbuildmat.2019.117961 ↗
27. Packing theory and volumetrics-based aggregate gradation design method10.1061/(ASCE)MT.1943-5533.0003192 ↗
28. Damage model of interaction between fatigue and creep for asphalt mixture
29. Preparation and thermal performance of binary fatty acid with diatomite as form-stable composite phase change material for cooling asphalt pavements10.1016/j.conbuildmat.2019.07.305 ↗
30. A viscoelastic damage constitutive model for asphalt mixture under the cyclic loading10.1016/j.conbuildmat.2019.08.012 ↗
31. Characterization of fatigue damage in asphalt mixtures using pseudostrain energy10.1061/(ASCE)MT.1943-5533.0000633 ↗
32. Development and verification of creep constitutive model for asphalt mixture based on continuum damage theory
33. Normalization of fatigue characteristics for asphalt mixtures under different stress states10.1016/j.conbuildmat.2018.05.109 ↗
34. Assessing artificial neural network performance for predicting interlayer conditions and layer modulus of multi-layered flexible pavement10.1007/s11709-020-0609-4 ↗
35. Viscoelastic fatigue constitutive model of asphalt mixture
36. (JTG F40-2004) Technical Specifications for Construction of Highway Asphalt Pavements, Renmin Communication Press, Beijing, China, 2004.
37. (JTG D50-2017) Specifications for Design of Highway Asphalt Pavement, Renmin Communication Press, Beijing, China, 2017.
38. (JTG E20-2011) Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering, Renmin Communication Press, Beijing, China, 2011.
39. Residual stiffness-residual strength coupled model of composite laminates
40. A review of some plasticity and viscoplasticity constitutive theories10.1016/j.ijplas.2008.03.009 ↗
41. Influence of asphalt mixture stiffness on fatigue failure10.1061/(ASCE)0899-1561(2004)16:6(516) ↗
42. Continuum damage mechanics
43. The effect of combined low-cycle fatigue and creep on the life of austenitic stainless steels10.1007/BF02913411 ↗