journal article·2020-08

The effect of NaOH content on rheological properties, microstructures and interfacial characteristic of alkali activated phosphorus slag fresh pastes

Fuzhu Xie, Ze Liu, Dawang Zhang, Jixiang Wang, Dongmin Wang, Jianling Ni

Publisher page

Abstract

Abstract This study focused on the effect of NaOH activators content on rheological properties, microstructures and interfacial characteristic of alkali activated phosphorus slag (AAPS) fresh pastes. Various parameters including rheological properties (fluidity, yield stress, and apparent viscosity), microstructures (flocculent structure, particle size distribution and geometrical properties of agglomerate structures) and interfacial characteristic (zeta potential) of AAPS fresh pastes with different NaOH activators content, were acquired, respectively. Morphologi G3 microscope was used to quantitatively analyze the microstructure properties of AAPS fresh pastes. Results shown that the effect of NaOH content on rheological properties of AAPS was attributed to the changes in the microstructures and interfacial characteristic of fresh pastes. With NaOH activators content increased, flocculent structures with smaller size were evenly distributed, and chain agglomerate structures with low binding force gradually substituted for group agglomerate structures with strong stability corresponding to greater elongation and smaller HS Circularity. This phenomenon could also be partly ascribed to stronger electrostatic repulsive force between particles in the high alkaline environment, leading to greater dispersion effect of free water on particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Recycling and utilization of industrial and municipal waste in materials production · Magnesium Oxide Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Shi · 2006
2. 2014
3. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
4. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
5. Reuse of hazardous electrolytic manganese residue: detailed leaching characterization and novel application as a cementitious material10.1016/j.resconrec.2019.104645 ↗
6. Evaluation of alkali-activated blast furnace ferronickel slag as a cementitious material: reaction mechanism, engineering properties and leaching behaviors10.1016/j.conbuildmat.2018.08.182 ↗
7. Durability of alkali-activated materials: progress and perspectives10.1111/jace.12831 ↗
8. Resistance of chemically-activated high phosphorous slag content cement against freeze–thaw cycles10.1016/j.coldregions.2014.03.012 ↗
9. Advances in understanding alkali-activated materials10.1016/j.cemconres.2015.04.013 ↗
10. Geopolymers: inorganic polymeric new materials10.1007/BF01912193 ↗
11. Mechanical properties of alkali-activated concrete: a state-of-the art review10.1016/j.conbuildmat.2016.09.121 ↗
12. Utilization of phosphorus slag and fly ash for the preparation of ready-mixed mortar
13. Reaction kinetics and kinetics models of alkali activated phosphorus slag10.1016/j.conbuildmat.2019.117728 ↗
14. Alkali-activated phosphorous slag performance under different curing conditions: compressive strength, hydration products, and microstructure10.1061/(ASCE)MT.1943-5533.0002101 ↗
15. Developing low-cost activators for alkali-activated phosphorus slag-based binders10.1061/(ASCE)MT.1943-5533.0001806 ↗
16. Recycling phosphorus slag as a precursor for alkali –activated binder; impact of type and dosage of activator
17. The rationale of a two-point workability test10.1680/macr.1973.25.84.169 ↗
18. Tattersall · 1983
19. Modification of the two-point workability apparatus10.1680/macr.1990.42.152.135 ↗
20. Effect of plasticizer and superplasticizer on rheology of fly-ash-based geopolyrner concrete
21. Rheology of geopolymer by DOE approach10.1016/j.conbuildmat.2012.04.122 ↗
22. Rheology of activated phosphorus slag with lime and alkaline salts10.1016/j.cemconres.2018.07.010 ↗
23. Rheology and apparent activation energy of alkali activated phosphorous slag10.1016/j.conbuildmat.2018.03.130 ↗
24. Rheological characterization of fly ash-based suspensions10.1016/j.conbuildmat.2014.04.130 ↗
25. Geopolymerization reaction, microstructure and simulation of metakaolin-based geopolymers at extended Si/Al ratios10.1016/j.cemconcomp.2017.01.014 ↗
26. Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers10.1016/j.powtec.2018.02.014 ↗
27. Rheology, agglomerate structure, and particle shape of fresh geopolymer pastes with different NaOH activators content10.1016/j.conbuildmat.2018.07.205 ↗
28. Cement particle flocculation and breakage monitoring under Couette flow
29. Steady state flow of cement suspensions: a micromechanical state of the art10.1016/j.cemconres.2009.08.026 ↗
30. The origins of thixotropy of fresh cement pastes10.1016/j.cemconres.2011.09.004 ↗
31. Rheological properties and microstructure of fresh cement pastes with varied dispersion media and superplasticizers10.1016/j.powtec.2018.02.014 ↗
32. Mesostructure evolution of cement pastes with addition of superplasticizers highlighted by dispersion indices10.1016/j.powtec.2013.08.036 ↗
33. Correlations of the dispersing capability of NSF and PCE types of superplasticizer and their impacts on cement hydration with the adsorption in fresh cement pastes10.1016/j.cemconres.2014.11.009 ↗
34. Repulsion forces of superplasticizers on ground granulated blast furnace slag in alkaline media, from AFM measurements to rheological properties10.3989/mc.2012.01612 ↗
35. Experimental Investigation of mechanical properties of highway high performance concrete containing ultrafine ash
36. Dissolution behaviour of source materials for synthesis of geopolymer binders: a kinetic approach10.1016/j.minpro.2016.05.014 ↗
37. Wang · 2014