journal article·2020-08

Influence of natural fibers on fracture strength of WMA (warm mix asphalt) concretes using a new fracture test specimen

S. Pirmohammad, M. Hojjati Mengharpey

Publisher page

Abstract

Abstract In this paper, two natural fibers (i.e. kenaf and basalt) are dispersed into WMA (warm mix asphalt) concretes to study their effect on fracture strength. The WMA concretes are reinforced by different percentages (i.e. 0.1, 0.3 and 0.5%) of kenaf and basalt fibers. A new test specimen (i.e. the disc bend (DB) specimen) is used to perform the experiments under various loading modes (i.e. pure mode I, mixed mode I/II and pure mode II). Indeed, this specimen has a circular geometry containing an edge crack, and the load is applied by a three-point bend fixture. The results demonstrate that both the kenaf and basalt fibers improve fracture resistance of the WMA mixtures. Addition of 0.3% of the kenaf and basalt fibers to the WMA concrete exhibits the highest positive effect on the fracture strength. Furthermore, WMA mixtures containing kenaf fibers showed better performance than those containing basalt fibers when they were loaded under pure mode I or mode I dominant mixed mode I/II. Conversely, the fracture strength of WMA mixtures is more improved by basalt fibers than kenaf fibers when the specimens were loaded under pure mode II or mode II dominant mixed mode I/II.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Natural Fiber Reinforced Composites · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Energy and exergy analysis in an asphalt plant’s rotary dryer10.1016/j.applthermaleng.2010.11.029 ↗
2. J.A. D'Angelo, E.E. Harm, J.C. Bartoszek, G.L. Baumgardner, M.R. Corrigan, J.E. Cowsert, et al., Warm-mix asphalt: European practice. 2008.
3. Performance of warm mix asphalt containing Sasobit®: state-of-the-art10.1016/j.conbuildmat.2012.08.015 ↗
4. Study of characteristic specification on mixed mode fracture toughness of asphalt mixtures10.1016/j.conbuildmat.2013.12.097 ↗
5. Fracture toughness prediction using Weibull statistical method for asphalt mixtures containing different air void contents10.1111/ffe.12474 ↗
6. The effect of loading rate on fracture energy of asphalt mixture at intermediate temperatures and under different loading modes
7. Mixed mode tensile–in plane shear fracture energy determination for hot mix asphalt mixtures under intermediate temperature conditions10.1016/j.engfracmech.2018.02.007 ↗
8. Effect of temperature and air void on mixed mode fracture toughness of modified asphalt mixtures10.1016/j.conbuildmat.2015.07.165 ↗
9. H. Behbahani, M. Aliha, M. Reza, H. Fazaeli, S. Aghajani, Experimental fracture toughness study for some modified asphalt mixtures. Advanced Materials Research: Trans Tech Publ; 2013, 337–344.10.4028/www.scientific.net/AMR.723.337 ↗
10. Effects of asphalt concrete characteristics on cohesive zone model parameters of hot mix asphalt mixtures10.1139/cjce-2014-0504 ↗
11. Asphalt concrete resistance against fracture at low temperatures under different modes of loading10.1016/j.coldregions.2014.11.001 ↗
12. Effect of temperature variations on fracture resistance of HMA mixtures under different loading modes10.1617/s11527-015-0753-9 ↗
13. Impact of temperature cycling on fracture resistance of asphalt concretes10.12989/cac.2016.17.4.541 ↗
14. Fracture resistance of asphalt concrete under different loading modes and temperature conditions10.1016/j.conbuildmat.2013.11.096 ↗
15. Temperature effects on brittle fracture in cracked asphalt concretes10.12989/sem.2013.45.1.019 ↗
16. Comparison of fatigue resistance of HMA and WMA mixtures modified by SBS10.1016/j.sbspro.2013.11.109 ↗
17. Fracture resistance of asphalt concrete modified with crumb rubber at low temperatures10.1016/j.ijprt.2017.10.003 ↗
18. Fracture resistance of HMA mixtures under mixed mode I/III loading at different subzero temperatures10.1016/j.ijsolstr.2017.05.010 ↗
19. The effect of basalt fibres on fracture toughness of asphalt mixture10.1111/ffe.13207 ↗
20. S. Pirmohammad, Y. Majd-Shokorlou, B. Amani, Experimental investigation of fracture properties of asphalt mixtures modified with Nano Fe2O3 and carbon nanotubes. Road Mater. Pavement Des., in press. 2020, 1–23.10.1080/14680629.2019.1608289 ↗
21. Influence of natural fibers (kenaf and goat wool) on mixed mode I/II fracture strength of asphalt mixtures10.1016/j.conbuildmat.2019.117850 ↗
22. Laboratory investigations on fracture toughness of asphalt concretes reinforced with carbon and kenaf fibers
23. Fracture resistance of HMA mixtures modified with nanoclay and Nano-Al2O310.1520/JTE20180919 ↗
24. The influence of natural and synthetic fibers on low temperature mixed mode I+ II fracture behavior of warm mix asphalt (WMA) materials10.1016/j.engfracmech.2017.06.003 ↗
25. Investigation of fatigue and fracture properties of asphalt mixtures modified with carbon nanotubes10.1111/ffe.12408 ↗
26. Study on fracture behavior of HMA mixtures under mixed mode I/III loading10.1016/j.engfracmech.2015.12.027 ↗
27. Characterizing mixed mode I/III fracture toughness of asphalt concrete using asymmetric disc bend (ADB) specimen10.1016/j.conbuildmat.2016.05.137 ↗
28. A novel test specimen for investigating the mixed mode I+ III fracture toughness of hot mix asphalt composites–experimental and theoretical study10.1016/j.ijsolstr.2016.03.018 ↗
29. Evaluation of fracture resistance of warm mix asphalt containing jute fibers10.1016/j.conbuildmat.2016.04.128 ↗
30. Fracture strength of warm mix asphalt concretes modified with crumb rubber subjected to variable temperatures
31. Utilisation of natural fibre as modifier in bituminous mixes: a review10.1016/j.conbuildmat.2013.12.037 ↗
32. Fatigue characteristics of stone mastic asphalt mix reinforced with fiber glass
33. Effects of fibers on the dynamic properties of asphalt mixtures10.1007/s11595-006-4733-3 ↗
34. Utilization of waste fibers in stone matrix asphalt mixtures10.1016/j.resconrec.2004.04.005 ↗
35. M. Hainin, M. Idham, N. Yaro, S. Hussein, M. Warid, A. Mohamed, et al., Performance of Hot Mix Asphalt Mixture Incorporating Kenaf Fibre. IOP Conference Series: Earth and Environmental Science: IOP Publishing; 2018. p. 012092.10.1088/1755-1315/140/1/012092 ↗
36. M.A. Sani, A.A. Latib, C.P. Ng, M.A. Yusof, N. Ahmad, M.A.M. Rani, Properties of coir fibre and kenaf fibre modified asphalt mixes. Proceedings of the Eastern Asia Society for Transportation Studies The 9th International Conference of Eastern Asia Society for Transportation Studies, 2011: Eastern Asia Society for Transportation Studies; 2011. p. 258.
37. Stabilizing asphalt concrete using kenaf fibers10.1166/asl.2018.11521 ↗
38. Investigation of usability of basalt fibers in hot mix asphalt concrete10.1016/j.conbuildmat.2013.04.048 ↗
39. W.X. Fan, S.F. Zhang, L.Q. Liu, Laboratory study of Marshall of basalt fiber-modified asphalt mixture. Appl. Mech. Mater.: Trans Tech Publ; 2013, 1851–1857.10.4028/www.scientific.net/AMM.256-259.1851 ↗
40. Effect of basalt fiber on the asphalt binder and mastic at low temperature10.1061/(ASCE)MT.1943-5533.0000605 ↗
41. Impact of short-cut basalt fiber on asphalt concrete performance
42. Rheological behavior of basalt fiber reinforced asphalt mastic10.1007/s11595-014-1026-0 ↗
43. C. Yingchun, Z. Guanghai, F. Hongyuan, Fatigue Property of Basalt Fiber-Modified Asphalt Mixture under Complicated Environment. Journal of Wuhan University of Technology (Materials Science Edition). 2014;5:024.
44. Evaluation of crack propagation properties of asphalt mixtures10.1061/(ASCE)0733-947X(1997)123:5(405) ↗
45. Mode I reflection cracking resistance of strengthened asphalt concretes10.1016/S0950-0618(99)00032-X ↗
46. Disk-shaped compact tension test for asphalt concrete fracture10.1177/0014485105053205 ↗
47. Investigation of the fracture resistance of hot-mix asphalt concrete using a disk-shaped compact tension test10.1177/0361198105192900122 ↗
48. Mixed mode fracture resistance of asphalt concrete mixtures10.1016/j.engfracmech.2012.06.015 ↗
49. A new mixed mode I/II fracture test specimen: numerical and experimental studies10.1016/j.tafmec.2018.08.012 ↗
50. Mode I fracture toughness determination with straight notched disk bending method10.1016/j.ijrmms.2011.09.019 ↗
51. Development of mechanistic-empirical pavement design in Minnesota10.3141/1629-20 ↗
52. Three-dimensional finite element modeling of a transverse top-down crack in asphalt concrete10.12989/cac.2014.13.4.569 ↗
53. Finite element analysis of road structure containing top-down crack within asphalt concrete layer10.1007/s11771-020-4292-3 ↗
54. Influence of waxes on bitumen and asphalt concrete mixture performance
55. Wax in bitumen: Part II—characterization and effects10.1080/14680629.2005.9690015 ↗
56. G.C. Hurley, B.D. Prowell, Evaluation of Sasobit for use in warm mix asphalt. NCAT report. 2005;5.
57. Investigation of fatigue cracks on RAP mixtures containing Sasobit and crumb rubber based on fracture energy10.1016/j.conbuildmat.2017.03.011 ↗
58. Effect of load application rate and temperature on the fracture energy of asphalt mixtures. Fénix and semi-circular bending tests10.1016/j.conbuildmat.2013.07.084 ↗
59. Munn W. Fiber-reinforced hot mix promises improved stability. Highways and Heavy Construction. 1989;132.
60. New mix method for fiber-reinforced asphalt
61. Fiber-reinforced asphalt-concrete–a review10.1016/j.conbuildmat.2009.11.009 ↗
62. Prospect of using glass fiber reinforced bituminous mixes
63. Development of an overlay design model for reflective cracking with and without steel reinforcing nettings
64. H. Busching, E. Elliott, N. Reyneveld, A state-of-the-art survey of reinforced asphalt paving. Association of Asphalt Paving Technologists Proc1970.
65. Comparative study on the damage characteristics of asphalt mixtures reinforced with an eco-friendly basalt fiber under freeze-thaw cycles10.3390/ma11122488 ↗
66. Pirmohammad · 2020
67. On determination of mode II fracture toughness using semi-circular bend specimen10.1016/j.ijsolstr.2005.07.049 ↗
68. Mixed mode I/II fracture strength of modified HMA concretes subjected to different temperature conditions10.1520/JTE20180848 ↗
69. M. Hojjati Mengharpey, Investigating the effect of temperature cycling on fracture behavior of warm mix asphalt (WMA) concretes reinforced with natural fibers under mixed mode I/II loaiding using a new test specimen: MSc Dissertation, University of Mohaghegh Ardabili; 2018.