journal article·2020-10

Assessment of PCM/SiC-based composite aggregate in concrete: Energy storage performance

Hong Gi Kim, Abdul Qudoos, In Kyu Jeon, Byeong Hun Woo, Jae Suk Ryou

Publisher page

Abstract

Abstract This work investigates the thermal energy storage performance of concrete using a phase change material (PCM)/SiC-based composite aggregate made with paraffin wax, silicon carbide, and slag aggregate. The thermal energy storage properties were evaluated using a differential scanning calorimetry (DSC) curve, thermal conductivity, hydration heat development, and internal temperature measurements. In addition, a mock-up concrete structure was constructed to evaluate thermal energy storage under natural conditions. The DSC curve showed that the PCM/SiC-based composite aggregate changed its phase and stored thermal energy at 33–34 °C. The internal temperature test indicated that the temperature of the sample with PCM/SiC-based composite aggregate was approximately 2–10 °C higher because of the thermal heat storage capacity of the PCM/SiC-based composite aggregate. A wall surface temperature of 42 °C and 45 °C, respectively at the internal and external side of the energy storage structure wall was measured. While an indoor temperature of 35 °C was observed for energy storage structure. However, the internal surface temperature of the plain structure wall and the indoor room temperature were 41 °C and 38 °C, respectively. The concrete structure with PCM/SiC-based composite aggregate decreased the room temperature and stored thermal energy of approximately 3 °C.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Adsorption and Cooling Systems · Solar Energy Systems and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. Paulou · 2014
2. P. Capros, A. De Vita, N. Tasios, P. Siskos, M. Kannavou, A. Petropoulos, S. Evangelopoulou, M. Zampara, D. Papadopoulos, C. Nakos, EU Reference Scenario 2016-Energy, transport and GHG emissions Trends to 2050, 2016.
3. Review on designs and properties of multifunctional alkali-activated materials (AAMs)10.1016/j.conbuildmat.2018.12.157 ↗
4. Hydration mechanism and early frost resistance of calcium sulfoaluminate cement concrete10.1016/j.conbuildmat.2019.117862 ↗
5. Mehling · 2008
6. Experimental investigations on latent heat storage unit using paraffin wax as phase change material10.1080/08916152.2012.719065 ↗
7. Thermal properties of paraffin wax-based composites containing graphite10.1080/15567030903117679 ↗
8. Thermal conductivity enhancement in a latent heat storage system10.1016/j.solener.2006.11.009 ↗
9. A review on thermal conductivity enhancement of paraffinwax as latent heat energy storage material10.1016/j.rser.2016.06.071 ↗
10. S. Carbide, Properties and Characteristics of Silicon Carbide, 2002
11. T. Jintakosol, S. Kumfu, P. Singjai, C. Busabok, Effect of wear tests on silicon carbide nanowires/aluminium metal powder composites, 2012
12. Characterization of silicon carbide reinforced aluminum matrix composites10.1016/j.proeng.2014.11.821 ↗
13. Fabrication and mechanical properties of silicon carbide nanowires/epoxy resin composites10.1016/j.cap.2007.10.074 ↗
14. Fabrication and characterization of silicon carbide/epoxy nanocomposite using silicon carbide nanowhisker and nanoparticle reinforcements10.1177/0021998315576378 ↗
15. Modification of Portland cement with nano SiC10.1007/s40010-015-0244-y ↗
16. Effect of silicon carbide nanowhiskers on hydration and mechanical properties of a Portland cement paste10.1016/j.conbuildmat.2018.02.185 ↗
17. Evaluation of steel slag coarse aggregate in hot mix asphalt concrete10.1016/j.jhazmat.2008.09.105 ↗
18. ASTM, ASTM C150/C150M – 17, Standard Specification for Portland Cement, West Conshohocken, PA, 2017.
19. Tong · 2011 · 59
20. Mesoscale model for thermal conductivity of concrete10.1016/j.conbuildmat.2015.08.106 ↗
21. Variations of thermal conductivity of insulation materials under different operating temperatures: Impact on envelope-induced cooling load10.1061/(ASCE)1076-0431(2002)8:4(125) ↗
22. A. Int, C518-15: Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus, ASTM International, 2015.
23. N. Hollis, D. Stephen, P. Stu, Petrographic methods of examining hardened concrete: a petrographic manual, United States Department of Transportation: Washington, DC, USA, 2006.
24. W.E.S. R. Byron Bird, Edwin N. Lightfoot, Transport Phenomena, second ed., Wiley, 2006.
25. Development of calcium silicate-coated expanded clay based form-stable phase change materials for enhancing thermal and mechanical properties of cement-based composite10.1016/j.solener.2018.08.085 ↗
26. Microstructure and compressive properties of silicon carbide reinforced geopolymer10.1016/j.compositesb.2016.08.036 ↗
27. A thermal conductive composite phase change material with enhanced volume resistivity by introducing silicon carbide for battery thermal management10.1016/j.applthermaleng.2018.07.095 ↗
28. Review on thermal energy storage with phase change materials and applications10.1016/j.rser.2007.10.005 ↗