journal article·2020-10

Spalling sensitivity and mechanical response of an ecofriendly sawdust high strength concrete at elevated temperatures

Ehsan Ullah Khan, Rao Arsalan Khushnood, Waqas Latif Baloch

Publisher page

Abstract

Abstract An eco-friendly high strength concrete (HSC) was developed with integration of wood waste (0, 5, 10, and 15%) in replacement to weight content of fine aggregate. Wood waste (sawdust) potentially a thermally degradable fiber was incorporated to enhance the fire endurance of high strength concrete. Mechanical strength and durability parameters of controlled and modified samples were explored along with the degradation on exposure to elevated temperatures. The investigated formulations were subjected to a maximum temperature of 800 °C on 5 °C/min ramp and then tested in the ambient conditions for the residual properties. Results depicted significant retention in compressive strength of sawdust high strength concretes (SD-HSC) at elevated temperatures with limited spalling sensitivity. Visual assessment along with micro-forensic evidences illustrate that SD-HSC exhibits reduced thermal cracking in macro, micro and the nano phase, in comparison with HSC. The experimental trends obtained from material property tests were used to develop simplified mathematical relationships that are helpful in performing analytical fire resistant studies for HSC formulations bearing sawdust grains. Conclusively, sawdust has been effectively utilized to develop an ecofriendly and fire resistant structurally applicable high strength concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Engineering and Material Science Research · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Development of a depletion indicator for natural resources used in concrete10.1016/j.resconrec.2009.09.002 ↗
2. M. Bilal Tahir, K. Nadeem Riaz, A.M.J.I.J.o.E.R., Asiri Boosting the performance of visible light-driven WO3/g-C3N4 anchored with BiVO4 nanoparticles for photocatalytic hydrogen evolution. 43, (11) 2019, pp. 5747-5758.10.1002/er.4673 ↗
3. M. Bilal Tahir, K. Nadeem Riaz, A.M.J.I.J.o.E.R., Asiri Role of fullerene to improve the WO3 performance for photocatalytic applications and hydrogen evolution. 42 (15) 2018, pp. 4783-4789.10.1002/er.4231 ↗
4. M.P. Juenger John L Elsen Jan Matthes R. Winnie Hooton Doug Duchesne Luc He JoséeCourard Huan Michel Frédéric Snellings Ruben, Supplementary cementitious materials for concrete: characterization needs MRS Online Proceedings Library Archive 2012. 1488.10.1557/opl.2012.1536 ↗
5. Sustainable transformation of fly ash industrial waste into a construction cement blend via CO2 carbonation10.1016/j.jclepro.2017.04.037 ↗
6. M. Zain, M.I. Fauzi, M.N. Mahmud, F. Jami, M., Production of rice husk ash for use in concrete as a supplementary cementitious material. Construct. Build, Mater. 2011. 25(2): p. 798-805.10.1016/j.conbuildmat.2010.07.003 ↗
7. A Review of the Use of Corncob Ash as a Supplementary Cementitious Material10.24018/ejers.2017.2.8.415 ↗
8. Recycled Construction Debris as Concrete Aggregate for Sustainable Construction Materials10.1016/j.proeng.2016.04.191 ↗
9. Thermal insulation enhancement in concretes by adding waste PET and rubber pieces10.1016/j.conbuildmat.2008.09.014 ↗
10. A.d.S., Sales, Rodrigues, Francis, F.d.C.R., Almeida, Mechanical properties of concrete produced with a composite of water treatment sludge and sawdust, Construct. Build. Mater. 25, 2011, pp. 2793-2798.10.1016/j.conbuildmat.2010.12.057 ↗
11. Spalling in high strength concrete exposed to fire: concerns, causes, critical parameters and cures
12. Mechanical response and spalling sensitivity of air entrained high-strength concrete at elevated temperatures10.1016/j.conbuildmat.2017.06.039 ↗
13. F.O.C. Ali D. Abu-Tair A., Explosive spalling of high-strength concrete columns in fire. Magaz. Concr. Res. 53 (3), 2001 pp. 197-204.10.1680/macr.53.3.197.39478 ↗
14. ACI, -. 211.4R-08: Guide for Selecting Proportions for High-Strength Concrete Using Portland Cement and Other Cementitious Materials. Technical Documents, 2008.
15. Zdeněk P. Bažant M.F.K., Zdeněk P Bazant 1996 Material Properties and Mathematical Models. Addison-Wesley Concrete at High Temperatures
16. Thermal behaviour of unstressed and stressed high strength concrete containing polypropylene fibers at elevated temperature10.1108/JSFE-07-2016-0014 ↗
17. The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete10.1016/j.conbuildmat.2010.06.018 ↗
18. Effect of high temperatures on high performance steel fibre reinforced concrete10.1016/j.cemconres.2006.03.024 ↗
19. Effectiveness of Polypropylene and Steel Fibers in Enhancing Fire Resistance of High-Strength Concrete Columns
20. Fresh and hardened-state properties of self-compacting lightweight concrete reinforced with steel fibers10.1016/j.conbuildmat.2015.12.060 ↗
21. Comparative study of the characteristics of nano silica-, silica fume-and fly ash-incorporated cement mortars10.1590/S1516-14392014005000054 ↗
22. Poyry, wood waste market in the UK. Forest Industry Consultant Ltd and Oxford Economic Ltd, 2009.
23. Effective use of sawdust for the production of eco-friendly and thermal-energy efficient normal weight and lightweight concretes with tailored fracture properties10.1016/j.jclepro.2018.03.009 ↗
24. O. J. Oyedepo, S.D.O.,S. P. Akande, Investigation of properties of concrete using sawdust as partial replacement for sand. Civ. Environ. Res, 2014. vol. 6, no. 2, pp. 35–42.
25. Materials selection guidelines for low thermal conductivity thermal barrier coatings10.1016/S0257-8972(02)00593-5 ↗
26. Thermal and mechanical properties of fiber reinforced high performance self-consolidating concrete at elevated temperatures10.1016/j.cemconres.2011.06.012 ↗
27. L.T.P.a.N.J., Carino Effects of Test Conditions and Mixture Proportions on Behavior of High-Strength Concrete Exposed to High Temperatures. Mater. J. 2002 9910.14359/11317 ↗
28. Dye adsorption on autohydrolyzed pine sawdust in batch and fixed-bed systems10.1016/j.cej.2011.04.029 ↗
29. C.U. Atuanya, A.O.A.I., Characterization of Okhuen (Brachystegia Nigerica) wood as a potential reinforcement for polymer composites. Mater. Sci. 2011.
30. Thermogravimetric analysis and kinetic study of poplar wood pyrolysis10.1016/j.apenergy.2011.12.056 ↗
31. Recycling of sawdust, spent earth from oil filtration, compost and marble residues for brick manufacturing10.1016/j.conbuildmat.2012.02.079 ↗
32. ASTM C150/C150M - 19a, Standard Specification for Portland Cement. ASTM International, West Conshohocken, 2019. 04.01.
33. ASTM C192/C192M - 18, Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory. “ ASTM International”, 2018.
34. L.T. Phan, High-Strength Concrete at High Temperature − AnOverview. 2002, pp. 501–518.
35. RILEM TC 129-MHT, compressive-strength-for-service-and-accident-conditions. Mater. Struct, 1995, 28, 410-414, 1995. 1995, 28, 410-414.10.1007/BF02473077 ↗
36. ASTM C1723-10, Standard guide for examination of hardened concrete using scanning electron microscopy, in: Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy,. ASTM International, West Conshohocken, 2010. PA 19428-2959, United States, pp. 1–9.
37. A. Aseem W.L. Baloch R.A. Khushnood, A.J.C.S.i.C.M., Mushtaq, Structural health assessment of fire damaged building using non-destructive testing and micro-graphical forensic analysis: A case study. 2019. 11, pp. e00258.10.1016/j.cscm.2019.e00258 ↗
38. High temperature material properties of calcium aluminate cement concrete10.1016/j.conbuildmat.2015.07.023 ↗
39. Taimur, Mechanical and physical response of recycled aggregates high-strength concrete at elevated temperatures10.1016/j.firesaf.2018.01.009 ↗
40. Variance analysis of crack characteristics of structural lightweight concrete containing silica fume exposed to high temperature10.1016/j.conbuildmat.2013.05.060 ↗
41. D..L. Zec Yu, Evaluation on mechanical enhancement and fire resistance of carbon nanotube (CNT) reinforced concrete. Coupl. Syst. Mechan., 2017,6, No. 3: p. 335-349.
42. Influence of recycled coarse aggregates on normal and high performance concrete subjected to elevated temperatures10.1016/j.conbuildmat.2016.02.056 ↗
43. Behaviour of cement concrete at high temperature
44. Physicochemical, mineralogical, and morphological characteristics of concrete exposed to elevated temperatures10.1016/S0008-8846(01)00736-0 ↗
45. Influence of multi-walled carbon nanotubes on the residual performance of concrete exposed to high temperatures10.1016/j.conbuildmat.2018.07.051 ↗
46. Zhiman Zhao, Zhiwei Lin, Kecheng He, Mechanical properties of concrete at high temperature—A review10.1016/j.conbuildmat.2015.05.131 ↗
47. Khaliq, W., Peformance characterization of high performance concretes under fire conditions, in Civil Engineering. 2012, Michigan State University: Michigan State University. p. 365.
48. ASTM C469/C469M-14, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression. ASTM International, West Conshohocken,, 2014. PA 19428-2959. p. pp. 1–5.
49. Relationship between impact energy and compression toughness energy of high-strength fiber-reinforced concrete10.1016/S0167-577X(00)00253-6 ↗
50. Compression specific toughness of normal strength steel fiber reinforced concrete (NSSFRC) and high strength steel fiber reinforced concrete (HSSFRC)10.1590/S1516-14392011005000042 ↗
51. Evaluating residual compressive strength of concrete at elevated temperatures using ultrasonic pulse velocity10.1016/j.firesaf.2008.05.003 ↗
52. Study of propagation of ultrasonic pulses in concrete exposed at high temperatures10.1016/j.prostr.2018.11.012 ↗
53. a. Hsuanchih Yang, Y.L.a., Chiamen Hsiao b, Jian-You, a. Liu, Evaluating residual compressive strength of concrete at elevated temperatures using ultrasonic pulse velocity Fire Safety J. 2009. 44(1): p. 121-130.10.1016/j.firesaf.2008.05.003 ↗
54. F. A. Alisson Rodriguesde Oliveira Dias, Maria Fabíolade Carvalho Rafael,Antônio EduardoBezerra Cabral., Study of propagation of ultrasonic pulses in concrete exposed at high temperatures. Procedia Structural Integrity, 2018. 11: p. 84-90.10.1016/j.prostr.2018.11.012 ↗
55. Evaluation of concrete degradation depending on heating conditions by ultrasonic pulse velocity10.1016/j.conbuildmat.2018.03.178 ↗
56. L.D. Kirchhof A. Lorenzi, L.C.P. SILVA FILHO, L.C.P., Assessment of concrete residual strength at high temperatures using ultrasonic pulse velocity. e-J. Nondestruct. Test. 2015, 20(7).
57. Minitab. Minitab Inc., http://www.minitab.com/en-us/products/minitab/, 2019.