journal article·2020-12Open access

Comparison of different bonding parameters in the production of beech and combined beech-spruce CLT by standard and optimized tests methods

Michele Brunetti, Michela Nocetti, Benedetto Pizzo, Francesco Negro, Giovanni Aminti, Paolo Burato, Corrado Cremonini, Roberto Zanuttini

Abstract

Interest in the use of beech wood in construction is growing steadily. Considering its high mechanical performance, it has a large potential to be used for the production of glued timber structural products. However, the issue of structural bonding remains to be solved before effective production and safe use of beech wood in these products can be achieved. Three adhesives (one-component polyurethane - PUR, PUR + primer and melamine-urea-formaldehyde - MUF) and two press systems (hydraulic and vacuum press) were explored in the production of pure beech and combined beech-spruce-beech cross laminated timber (CLT). An evaluation of the bonding quality was performed with both standardized and optimized (the specimen layers were oriented with the wood grain forming an angle of 45° with respect to the load application) delamination and shear test methods. None of the adhesives that were tested met the requirements for delamination tests provided by the current standard for softwood. Specifically, PUR yielded the poorest performance in the production of the CLT panels entirely made of beech; the addition of a primer improved the bonding, achieving results comparable to those observed for MUF. On the contrary, in the production of beech-spruce panels, the three adhesives showed similar results. The press system was not a relevant factor in terms of bonding quality. In regard to testing, a size effect was noticed in the delamination test: the larger the specimen the greater the delaminations that were observed. The shear tests on dry specimens proved to be less efficient in determining the influence of the several bonding parameters, even if a 45° grain orientation seemed to reduce the rolling shear during the shear test and to improve the response of the test in this regard. Combining delamination pretreatment and shear made the test more sensitive and objective.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Forest Ecology and Biodiversity Studies · Tree Root and Stability Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. EN 16351, Timber structures. Cross laminated timber. Requirements, CEN – European Committee for Standardization, Brussels, 2015.
2. Regulation (EU) 305/2011, of 9 MArch 2011 laying down harmonized conditions for the marketing of construction products and repealing Council Directive 89/106/EEC, 2011.
3. EN 301, Adhesives phenolic and aminoplastic for load-bearing timber structures. Classification and performance requirements, CEN – European Committee for Standardization, Brussels, 2017.
4. EN 15425, Adhesives. One component polyurethane (PUR) for load-bearing timber structures. Classification and performance requirements, CEN - European Committee for Standardization, Brussels, 2017.
5. EN 1995-1-1, Eurocode 5: Design of timber structures. Part 1-1: General. Common rules and rules for buildings, CEN - European Committee for Standardization, Brussels, 2004.
6. S. Aicher, Z. Christian, G. Dill-Langer, Hardwood glulams. Emerging timber products of superior mechanical properties, in: Proceedings of the World Conference on Timber Engineering, WCTE, Québec City, Canada, 2014.
7. S. Torno, M. Knorz, J.-W. van de Kuilen, Supply of beech lamellas for the production of glued laminated timber, in: Proceedings of the International Scientific Conference on Hardwood Processing, ISCHP, Firenze, Italy, 2013: pp. 210–217.
8. Above-ground net primary productivity in young stands of beech and spruce
9. Projecting tree species composition changes of european forests for 2061–2090 Under RCP 4.5 and RCP 8.5 scenarios10.3389/fpls.2018.01986 ↗
10. P. Glos, J.K. Denzler, P.W. Linsenmann, Strength and stiffness behaviour of beech laminations for high strength glulam, in: Proceedings of the CIB W18, Meeting 37, Edinburgh, Scotland, paper 37-6-3, 2004.
11. T. Ehrhart, G. Fink, R. Steiger, A. Frangi, Experimental investigation of tensile strength and stiffness indicators regarding European beech timber, in: Proceedings of the World Conference on Timber Engineering, WCTE, Vienna, Austria, 2016: pp. 600–607.
12. T. Ehrhart, G. Fink, R. Steiger, Strength grading of European beech lamellas for the production of GLT & CLT, in: Proceedings of the International Network on Timber Engineering Research, INTER, Meeting 49, Graz, Austria, paper 49-05-1, 2016.
13. Characteristic bending strength of beech glulam10.1617/s11527-006-9117-9 ↗
14. Shear strength of glued laminated timber made from European beech timber10.1007/s00107-009-0399-9 ↗
15. Rolling shear modulus and strength of beech wood laminations10.1515/hf-2015-0229 ↗
16. T. Ehrhart, R. Steiger, P. Palma, A. Frangi, Mechanical properties of European beech glued laminated timber, in: Proceedings of the International Network on Timber Engineering Research, INTER, Meeting 51, Tallin, Estonia, paper 51-12-4, 2018.
17. S. Franke, Mechanical properties of beech CLT, in: Proceedings of the World Conference on Timber Engineering, WCTE, Vienna, Austria, 2016.
18. Hybrid cross-laminated timber plates with beech wood cross-layers10.1016/j.conbuildmat.2016.08.051 ↗
19. S. Aicher, M. Hirsch, Z. Christian, Hybrid beech and spruce cross-laminated timber, in: Proceedings of the World Conference on Timber Engineering, WCTE, Vienna, Austria, 2016.
20. Effects of the thickness of cross-laminated timber (CLT) panels made from Irish Sitka spruce on mechanical performance in bending and shear10.1016/j.conbuildmat.2016.04.145 ↗
21. The influence of panel lay-up on the characteristic bending and rolling shear strength of CLT10.3390/buildings8090114 ↗
22. Survey of selected adhesive bonding properties of nine European softwood and hardwood species10.1007/s00107-016-1087-1 ↗
23. Beech (Fagus sylvatica L.) – Technological properties, adhesion behaviour and colour stability with and without coatings of the red heartwood10.1051/forest:2005105 ↗
24. D. Ohnesorge, K. Richter, U. Seeling, Project “Innovation for Beech” Gluability of Beech Wood Containing Red Heartwood, in: Wood Structure and Properties’ 06, Edited by S. Kurjatko, J. Kúdela & R. Lagaňa, Arbora Publishers, Zvolen, Slovakia, 2006: pp. 471–474.
25. Delaminierungseigenschaften und Scherfestigkeiten von verklebten rotkernigen Buchenholzlamellen10.1007/s00107-006-0135-7 ↗
26. Influence of wood properties and bonding parameters on bond durability of European Beech (Fagus sylvatica L.) glulams10.1051/forest/2010002 ↗
27. Bonding of hardwoods with 1C PUR adhesives for timber construction10.1002/bapi.201200025 ↗
28. Gluing of European beech wood for load bearing timber structures10.1007/s00107-009-0382-5 ↗
29. Improvement of tensile shear strength and wood failure percentage of 1C PUR bonded wooden joints at wet stage by means of DMF priming10.1007/s00107-014-0786-8 ↗
30. 1C-PUR-bonded hardwoods for engineered wood products: influence of selected processing parameters10.1007/s00107-014-0875-8 ↗
31. About the influence of a water-based priming system on the interactions between wood and one-component polyurethane adhesive studied by atomic force microscopy and confocal Raman spectroscopy imaging10.1016/j.ijadhadh.2017.10.001 ↗
32. Influence of wood machining on tensile shear strength and wood failure percentage of one-component polyurethane bonded wooden joints after wetting10.1179/2042645313Y.0000000039 ↗
33. Structural bonding of ash (Fraxinus excelsior L.): resistance to delamination and performance in shearing tests10.1007/s00107-014-0778-8 ↗
34. Influence of surface preparation methods on moisture-related performance of structural hardwood–adhesive bonds10.1016/j.ijadhadh.2014.10.003 ↗
35. Quality assessment of glued ash wood for construction engineering10.1007/s00107-015-0981-2 ↗
36. Bonding quality of industrially produced cross-laminated timber (CLT) as determined in delamination tests10.1016/j.conbuildmat.2016.12.057 ↗
37. Shear strength and durability testing of adhesive bonds in cross-laminated timber10.1080/00218464.2015.1094391 ↗
38. Quality control of glulam: shear testing of bondlines10.1007/s00107-010-0456-4 ↗
39. A shear test for structural adhesives used in the consolidation of old timber10.1007/s001070050486 ↗
40. Comparison of newly proposed test methods to evaluate the bonding quality of cross-laminated timber (CLT) panels by means of experimental data and finite element (FE) analysis10.1016/j.conbuildmat.2016.08.113 ↗
41. Bonding quality of cross-laminated timber: evaluation of test methods on Eucalyptus grandis panels10.1016/j.conbuildmat.2019.03.240 ↗
42. Feasibility of manufacturing cross-laminated timber using fast-grown small diameter eucalyptus lumbers10.1016/j.conbuildmat.2016.12.027 ↗
43. Factors affecting the strength of block-shear specimens