Relation between water permeability and chloride diffusivity of concrete under compressive stress: Experimental investigation and mesoscale lattice modelling
Source abstract
Abstract
Abstract This paper presents experimental investigations and a lattice modelling of the water permeability and chloride diffusivity of concrete under compressive stress and then proposes relationships between these two transport properties. Two representative ordinary concretes usually used in structures, subjected to compressive loading and water seepage or chloride contact, are considered. Water permeability tests were performed on hollow cylindrical samples in which the water diffuses in the radial direction through the sample thickness from the outer to inner surfaces under three different pressure gradients 3, 4 and 5 atm. Four compressive stresses (20%; 40%; 60% and 80% of the compressive strength) were applied on the sample top surface during the water permeability measurement. Rapid Chloride Permeability Testing (RCPT) is used to evaluate the chloride diffusivity. RCPT was carried out on cylindrical cores under four different stress levels (0; 25%; 50% and 75% of the stress at ultimate load). Mesoscale hydro-mechanical lattice modelling is proposed to model the fluid flow and chloride ingress in concrete under stress. In such a model, concrete includes three constituents: cement, aggregates and interfacial transition zone (ITZ). A softening damage model is employed to describe the behaviour of the cement matrix and the ITZ, while the aggregates are assumed to be elastic. Hydro-mechanical parameters of concrete components are calibrated from the experimental results of both water permeability and chloride diffusion tests. The proposed model allows extrapolating the experimental results for higher compressive stress. A relation between water permeability and diffusivity coefficients is resulted from both experimental and numerical investigations for a large range of compressive stress.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Geophysical Methods and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. AASHTO T277-86, (1990). “Rapid determination of the chloride permeability of concrete, Standard Specifications Part II, Tests”, American Association of States Highway and Transportation Officials, Washington, D.C.
2. AASHTO 259-80, (1990). “Resistance of concrete to chloride ion penetration, Standard Specifications Part II, Tests.” American Association of States Highway and Transportation Officials, Washington, D.C.
3. Non-destructive measurement of chloride ions concentration in concrete–a comparative analysis of limitations and prospects10.1016/j.conbuildmat.2018.04.135 ↗
4. Simulating the effect of microcracks on the diffusivity and permeability of concrete using a three-dimensional model10.1016/j.commatsci.2016.03.047 ↗
5. New experimental method for evaluating the water permeability of concrete by a lateral flow procedure on a hollow cylindrical test piece10.1016/j.conbuildmat.2017.06.126 ↗
6. ASTM C33, (2013). “Standard Specification for Concrete Aggregates.” American Society for Testing and Materials.
7. ASTM C150/C150M-18, (2018). “Standard Specification for Portland Cement.” American Society for Testing and Materials.
8. ASTM C1202-19, (2019). “Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration.” American Society for Testing and Materials.
9. ASTM C1556, (2016). “Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion.” American Society for Testing and Materials.
10. ASTM C136, (2014). “Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates.” American Society for Testing and Materials.
11. ASTM C469, (2014). “Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression.” American Society for Testing and Materials.
12. ASTM C496, (2017). “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens.” American Society for Testing and Materials.
13. ASTM C39, (2017). “Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens.” American Society for Testing and Materials.
14. Voronoi diagrams - a survey of fundamental geometric data structure10.1145/116873.116880 ↗
15. Permeability of concrete under stress10.1016/j.cemconres.2004.10.044 ↗
16. Computational mechanics of the steel–concrete interface10.1002/nag.158 ↗
17. Permeability of concrete with fiber reinforcement and service life predictions10.1617/s11527-007-9249-6 ↗
18. Measurement of concrete permeability under stress10.1111/j.1747-1567.2006.00082.x ↗
19. Estimating the life cycle of reinforced concrete decks and marine piles using laboratory diffusion and corrosion data
20. Irregular lattice model for quasi static crack propagation10.1103/PhysRevB.71.094106 ↗
21. Simulation of shrinkage induced cracking in cement composite overlays10.1016/j.cemconcomp.2003.04.001 ↗
22. Fracture analysis using spring networks with random geometry10.1016/S0013-7944(98)00069-1 ↗
23. Coupled thermo–mechanical interface model for concrete failure analysis under high temperature10.1016/j.cma.2015.02.016 ↗
24. Application of a n-phase model to the diffusion coefficient of chloride in mortar10.1023/B:TIPM.0000021730.34756.40 ↗
25. Coupling between progressive damage and permeability of concrete: analysis with a discrete model10.1002/nag.445 ↗
26. 2D mesoscopic modelling of bar–concrete bond10.1016/j.engstruct.2012.11.018 ↗
27. Influence of the interfacial zone on the chloride diffusivity of mortars10.1016/S1065-7355(96)00008-9 ↗
28. Effect of uniaxial compressive loading on gas permeability and chloride diffusion coefficient of concrete and their relationship10.1016/j.cemconres.2013.05.013 ↗
29. Influence of traversing crack on chloride diffusion into concrete10.1016/j.cemconres.2007.10.007 ↗
30. Permeability, diffusivity and microstructural parameters: a critical review10.1016/0008-8846(90)90101-3 ↗
31. A lattice approach to model flow in cracked concrete10.1016/j.cemconcomp.2009.05.001 ↗
32. Random lattice-particle simulation of statistical size effect in quasi-brittle structures failing at crack initiation10.1061/(ASCE)0733-9399(2009)135:2(85) ↗
33. On a 2D hydro-mechanical lattice approach for modelling hydraulic fracture10.1016/j.jmps.2014.11.011 ↗
34. Meso-scale modelling of the size effect on the fracture process zone of concrete10.1016/j.ijsolstr.2012.03.023 ↗
35. Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar10.1016/j.cemconres.2009.09.012 ↗
36. Meso-scale approach to modelling the fracture process zone of concrete subjected to uniaxial tension10.1016/j.ijsolstr.2009.12.010 ↗
37. Mesoscale approach to modeling concrete subjected to thermomechanical loading10.1061/(ASCE)0733-9399(2010)136:3(322) ↗
38. A review of the chloride transport properties of cracked concrete: experiments and simulations10.1631/jzus.A1400247 ↗
39. The effect of mechanical stress on permeability of concrete: a review10.1016/j.cemconcomp.2009.02.003 ↗
40. Permeability of stressed concrete10.1080/09613219108727156 ↗
41. Mesoscale computational modeling of the plastic damage response of cementitious composites10.1016/j.cemconres.2010.12.002 ↗
42. Effect of crack opening on the local diffusion of chloride in cracked mortar samples10.1016/j.cemconres.2008.03.009 ↗
43. Effect of crack opening on the local diffusion of chloride in inert materials10.1016/j.cemconres.2003.10.025 ↗
44. Correlation of radial flow-through and hollow cylinder dynamic pressurization test for measuring permeability10.1061/(ASCE)0899-1561(2009)21:10(594) ↗
45. An experimental and numerical study on water permeability of concrete10.1016/j.conbuildmat.2015.12.184 ↗
46. Reinforcement–concrete bond behavior: experimentation in drying conditions and meso-scale modeling10.1016/j.engstruct.2015.07.028 ↗
47. Effect of the non-linear membrane potential on the migration of ionic species in concrete10.1016/j.electacta.2008.11.031 ↗
48. NT BUILD 492, (1999). “Concrete, mortar, and cement-based repair materials: chloride migration coefficient from non-steady state migration experiments.” Nordtest, Espoo, Finland, 1999.
49. NT BUILD 443, (1995). “Concrete, hardened: Accelerated chloride penetration.” Nordtest, Espoo, Finland.
50. On the effective transport properties of heterogeneous materials10.1016/j.ijengsci.2016.04.001 ↗
51. Thermo-mechanically-induced thermal conductivity change and its effect on the behaviour of concrete10.1016/j.conbuildmat.2018.11.146 ↗
52. Effects of material and environmental parameters on chloride penetration profiles in concrete structures10.1016/j.cemconres.2006.09.005 ↗
53. Okabe · 2000
54. Object oriented finite element modeling
55. Determination of water permeability of cementitious materials using a controlled constant flow method10.1016/j.conbuildmat.2013.06.074 ↗
56. Poulsen · 2006
57. Effective permeability of cracked unsaturated porous materials10.1016/j.ijsolstr.2013.05.027 ↗
58. Lattice modeling of rapid chloride migration in concrete10.1016/j.cemconres.2014.04.004 ↗
59. Lattice modeling of chloride diffusion in sound and cracked. concrete10.1016/j.cemconcomp.2013.05.003 ↗
60. Effect of flexure induced transverse crack and self-healing on chloride diffusivity of reinforced mortar10.1007/s10853-007-1932-z ↗
61. The interfacial transition zone (ITZ) between cement paste and aggregate in concrete10.1023/B:INTS.0000042339.92990.4c ↗
62. Mesoscopic numerical simulation of effective thermal conductivity of tensile cracked concrete10.1016/j.conbuildmat.2015.07.117 ↗
63. Damage-induced permeability changes in granite: a case example at the URL in Canada10.1016/S1365-1609(01)00002-8 ↗
64. Non-destructive methods for measuring chloride ingress into concrete: stateof-the-art and future challenges10.1016/j.conbuildmat.2014.06.009 ↗
65. Long-term chloride migration coefficient in slag cement-based concrete and resistivity as an alternative test method10.1016/j.conbuildmat.2016.04.054 ↗
66. Effective permeability of three-dimensional porous media containing anisotropic distributions of oriented elliptical disc-shaped fractures with uniform aperture10.1016/j.advwatres.2018.05.014 ↗
67. Theoretical predicting of permeability evolution in damaged rock under compressive stress
68. Comparisons of instantaneous chloride diffusion coefficients determined by RCM method and chloride natural diffusion test10.1016/j.conbuildmat.2019.07.014 ↗
69. Influence of service loading and the resulting micro-cracks on chloride resistance of concrete10.1016/j.conbuildmat.2016.01.005 ↗
70. Mesoscale modelling of the chloride diffusion in cracks and cracked concrete10.3151/jact.9.241 ↗
71. Mesoscale modeling of water penetration into concrete by capillary absorption10.1016/j.oceaneng.2010.12.019 ↗
72. Penetration profile of chloride ion in cracked reinforced concrete10.1016/j.cemconres.2003.11.020 ↗
73. Chloride binding of cement-based materials subjected to external chloride environment–a review10.1016/j.conbuildmat.2008.02.004 ↗
74. Numerical and statistical analysis of permeability of concrete as a random heterogeneous composite10.12989/cac.2010.7.5.469 ↗
75. The stress-strain-permeability behaviour of clay rock during damage and recompaction10.1016/j.jrmge.2015.10.001 ↗