journal article·2021-02

Analysis of properties of pervious concrete prepared with difference paste-coated recycled aggregate

Lixiang Yang, Shicong Kou, Xingfu Song, Meirong Lu, Qiong Wang

Publisher page

Abstract

Abstract Recycled aggregate (RA) differs from natural aggregate because the former possesses microstructure disadvantages, such as micro-cracks, weak interface transition zones, which hinder its application in pervious concrete. In this study, RA was firstly reinforced by paste-coating on the surface. Then, the relationship between paste-coating thickness with different size RA and paste with 5% silica fume fluidity, and that of paste fluidity, w/c ratio and superplasticizer (SP) dose were obtained. Finally, based on the two relationships and properties data of RA, the pervious concrete was formulated. The obtained pervious concrete presented excellent workability, a large sufficient permeability (more than 6.5 mm s−1) for draining rainwater and good mechanical resistance (28 d compressive strength reached 18.5 MPa). This indicates that the proposed method is a successful approach for mixture proportioning of pervious concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Urban Stormwater Management Solutions · Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. W. Martínez-Molina A.A. Torres-Acosta E.M. Alonso-Guzmán H.L. Chávez-García H. Hernández-Barrios C. Lara-Gómez W. Martínez-Alonso J.T. Pérez-Quiroz J.A. Bedolla-Arroyo F.M. González-Valdéz Concreto reciclado: una revisión Revista ALCONPAT 5 3 2015 235 24810.21041/ra.v5i3.91 ↗
2. Dynamic mechanical analysis of cement mortar prepared with recycled cathode ray tube (CRT) glass as fine aggregate10.1016/j.jclepro.2017.11.057 ↗
3. Compression response of normal and high strength pervious concrete10.1016/j.conbuildmat.2016.01.051 ↗
4. Effect of elevated temperatures and cooling methods on strength of concrete made with coarse and fine recycled concrete aggregates10.1016/j.conbuildmat.2019.03.215 ↗
5. An environmentally friendly method to improve the quality of recycled concrete aggregates10.1016/j.conbuildmat.2017.03.191 ↗
6. Evaluation on the surface modification of recycled fine aggregates in aqueous H2SiF6 solution10.1186/s40069-018-0256-5 ↗
7. Properties enhancement of recycled aggregate concrete through pretreatment of coarse aggregates – Comparative assessment of assorted techniques10.1016/j.jclepro.2018.04.192 ↗
8. Mechanical and fracture properties of concrete containing treated and untreated recycled concrete aggregates10.1016/j.conbuildmat.2019.03.179 ↗
9. Evaluation of various treatment methods for enhancing the physical and morphological properties of coarse recycled concrete aggregate10.1016/j.conbuildmat.2016.02.176 ↗
10. effect of different treatment methods on interfacial transition zone microstructure to coarse recycled concrete aggregate.pdf*.
11. Performance enhancement of recycled concrete aggregate – A review10.1016/j.jclepro.2015.08.057 ↗
12. Laboratory evaluation of treated recycled concrete aggregate in asphalt mixtures10.1007/s42947-019-0004-5 ↗
13. [13] A. Kavussi, F. Kazemian, M. Bayzidi, Properties of Hot Mix Asphalt Containing Treated Recycled Concrete Aggregates Using SCB and ITS Tests, in: C. Raab (Ed.) Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements—Mairepav9, Springer International Publishing, Cham, 76(2020), 419-431. 10.1007/978-3-030-48679-2_4010.1007/978-3-030-48679-2_40 ↗
14. Effects of carbonation treatment on the crushing characteristics of recycled coarse aggregates10.1016/j.conbuildmat.2018.12.158 ↗
15. Effects of nano-particles on failure process and microstructural properties of recycled aggregate concrete10.1016/j.conbuildmat.2017.03.051 ↗
16. Effect of mixing methods of nano silica on properties of recycled aggregate concrete10.1002/suco.201700091 ↗
17. Enhancement of properties of recycled coarse aggregate concrete using bacteria10.1080/19475411.2016.1152322 ↗
18. Microbial carbonate precipitation for the improvement of quality of recycled aggregates10.1016/j.jclepro.2017.04.051 ↗
19. Using microbial carbonate precipitation to improve the properties of recycled aggregate10.1016/j.conbuildmat.2019.116743 ↗
20. Microstructural Features of Recycled Aggregate Concrete: From Non-Structural to High-Performance Concrete10.1017/S1431927619000096 ↗
21. Changes in microstructure characteristics of cement paste on carbonation10.1016/j.cemconres.2018.04.016 ↗
22. Performance of mortar prepared with recycled concrete aggregate enhanced by CO2 and pozzolan slurry10.1016/j.cemconcomp.2017.10.013 ↗
23. Performance Analysis of a Recycled Concrete Interfacial Transition Zone in a Rapid Carbonization Environment10.1155/2018/1962457 ↗
24. Interfacial properties of modeled recycled aggregate concrete modified by carbonation10.1016/j.conbuildmat.2015.12.077 ↗
25. Durability of recycled aggregate concrete prepared with carbonated recycled concrete aggregates10.1016/j.cemconcomp.2017.09.015 ↗
26. Carbonation treatment of recycled concrete aggregate: Effect on transport properties and steel corrosion of recycled aggregate concrete10.1016/j.cemconcomp.2019.103360 ↗
27. Effect of CO2 curing on demolition recycled fine aggregates enhanced by calcium hydroxide pre-soaking10.1016/j.conbuildmat.2017.07.079 ↗
28. Enhancement of recycled aggregate properties by accelerated CO2 curing coupled with limewater soaking process10.1016/j.cemconcomp.2018.03.011 ↗
29. Effect of carbonated recycled coarse aggregate on the dynamic compressive behavior of recycled aggregate concrete10.1016/j.conbuildmat.2017.06.043 ↗
30. Film-forming ability of flowable cement pastes and its application in mixture proportioning of pervious concrete10.1016/j.conbuildmat.2014.08.018 ↗
31. A modified method for the design of pervious concrete mix10.1016/j.conbuildmat.2014.09.088 ↗
32. Maximum paste coating thickness without voids clogging of pervious concrete and its relationship to the rheological properties of cement paste10.1016/j.conbuildmat.2018.02.128 ↗
33. Chinese Standard GB/T8077–2012.
34. Aitcin · 2011
35. An investigation into the influence of inter-aggregate spacing and the extent of the ITZ on properties of Portland cement concretes10.1016/j.cemconres.2010.07.002 ↗
36. A simple method for determining the surface area of fine aggregates and fillers in bituminous mixtures
37. Chinese National Standard, Technical specification for application of pervious recycled aggregate concrete, CJJ/T, vols. 253-2016, Beijing, China, 2016.
38. Chinese National Standard, Technical specification for pervious cement concrete pavement, CJJ/T, vols. 135-2009, Beijing, China, 2009.
39. Chinese National Standard, Standard for test method of mechanical properties on ordinary concrete, GB/T, vols. 50081-2002, Beijing, China, 2009.
40. Influence of silica fume on mechanical and durability of pervious concrete10.1016/j.conbuildmat.2020.118453 ↗
41. Rheology of cementitious paste with silica fume or limestone10.1016/j.cemconres.2007.08.012 ↗
42. Rheological properties of cementitious materials containing mineral admixtures10.1016/j.cemconres.2004.11.002 ↗
43. Correlating cement characteristics with rheology of paste10.1016/j.cemconres.2007.08.011 ↗
44. Permeation properties of concrete made with fly ash and silica fume: Influence of ureolytic bacteria10.1016/j.conbuildmat.2013.08.023 ↗
45. Compressive behavior of pervious concretes and a quantification of the influence of random pore structure features10.1016/j.msea.2010.09.024 ↗
46. Pore structure features of pervious concretes proportioned for desired porosities and their performance prediction10.1016/j.cemconcomp.2011.06.002 ↗
47. ASTM C109/C109M: Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens).
48. ASTM C1161: Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature.
49. ASTM C 1754: Standard Test Method for Density and Void Content of Hardened Pervious Concrete.
50. Fawzy Experimental investigation on permeability indices and strength of modified pervious concrete with recycled concrete aggregate10.1016/j.conbuildmat.2018.10.182 ↗