Comparison of test methods to determine resistance to chloride penetration in concrete: Sensitivity to the effect of fly ash
Source abstract
Abstract
Abstract There are several methodologies for assessing the entry of chlorides into the concrete. This article aims to compare four test methods to determine the concrete resistance to chloride penetration. The sensitivity of these methods to the effect of three levels of fly ash was investigated. Besides, three ranges of compressive strength were evaluated. The sensitivity of the fly ash effect was different in each test. The physical effect of pore refinement caused by fly ash was identified in all tests, while the chemical effect was suppressed in the accelerated C1202 migration procedure. This reduced the correlation of this last test with the other procedures. The chloride depths between the different tests are closer as the fly ash content increases. New ranges of chloride penetration for each test from the silver nitrate spray were suggested, using the charge passed or the non-stationary chloride diffusion coefficient as reference.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. W. Mazer, M.G. Lima, R.A. Medeiros-Junior, L.F.S. Wickzick, Chloride ingress into concrete under different conditions of temperature and marine zones, Mag. Concr. Res. (2020) ahead of print, http://dx.doi.org/10.1680/jmacr.19.00451.10.1680/jmacr.19.00451 ↗
2. Corrosion degree effect on nominal and effective strengths of naturally corroded reinforcement10.1061/(ASCE)MT.1943-5533.0001599 ↗
3. Degradation of fly ash concrete under the coupled effect of carbonation and chloride aerosol ingress10.1016/j.corsci.2016.08.004 ↗
4. Performance of high-volume fly ash concrete in marine environment10.1016/j.cemconres.2017.09.008 ↗
5. Influence of sodium chloride on leaching behavior of fly ash stabilized with carbide lime10.1016/j.conbuildmat.2019.07.297 ↗
6. Efficiency of electrochemical extraction of chlorides in fly ash concrete using carbon fibre mesh anode10.1016/j.conbuildmat.2020.118717 ↗
7. Diffusion and distribution of chloride ions in carbonated concrete with fly ash10.1016/j.conbuildmat.2019.05.041 ↗
8. Electrical resistivity of concrete exposed to chlorides and sulfates
9. Understanding the effect of curing age on the chloride resistance of fly ash blended concrete by rapid chloride migration test10.1016/j.matchemphys.2017.05.011 ↗
10. Impact of climate change on the service life of concrete structures
11. Study of the environment factor from Fick’s and electrical resistivity models by simulation of chloride diffusivity prediction10.1177/1369433220906932 ↗
12. ASTM C1202: Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration, American Society for Testing and Materials (ASTM), West Conshohocken (PA), 2017.
13. NT Build 492: Concrete, mortar and cement-based repair materials: chloride migration coefficient from non-steady state migration experiments, Nordtest, Espoo, 1999.
14. ASTM C1543: Standard test method for determining the penetration of chloride ion into concrete by ponding, American Society for Testing and Materials (ASTM), West Conshohocken (PA), 2010.
15. NT Build 443: Concrete, hardened: accelerated chloride penetration, Nordtest, Espoo, 1995.
16. Chloride ingress in a belite-calcium sulfoaluminate cement matrix10.1016/j.cemconres.2017.02.013 ↗
17. Application of X-ray microfluorescence for the determination of chloride diffusion coefficients in concrete chloride penetration experiments10.1016/j.conbuildmat.2017.05.072 ↗
18. EU PROJECT CHLORTEST: Guideline for practical use of methods for testing the resistance of concrete to chloride ingress. SP Swedish National Testing and Research Institute, 271 p., 2005. Available in: https://cordis.europa.eu/project/id/G6RD-CT-2002-00855. Accessed in: Dec., 9, 2020.
19. Comparison of chloride permeability methods for Alkali-Activated concrete10.1016/j.conbuildmat.2018.01.016 ↗
20. Using charge passed to determine the chloride diffusion coefficient in mortar from accelerated chloride migration test10.1016/S0950-0618(03)00004-7 ↗
21. The relationship between charge passed and the chloride-ion concentration in concrete using steady-state chloride migration test10.1016/S0008-8846(01)00662-7 ↗
22. R. Snellings, Assessing, understanding and unlocking supplementary cementitious materials, RILEM Technical Letters, [S.l.], v. 1, Aug. 2016, pp. 50–55 ISSN 2518- 0231. Available at: https://letters.rilem.net/index.php/rilem/article/view/12. Accessed on Dec. 9, 2020.10.21809/rilemtechlett.2016.12 ↗
23. Exposure of RC building structures to the marine environment of the Valencia coast10.1016/j.jobe.2017.11.016 ↗
24. Performance of pfa concrete in a marine environment––10-year results10.1016/S0958-9465(02)00117-8 ↗
25. Long-term mechanical and durability properties of recycled aggregate concrete prepared with the incorporation of fly ash10.1016/j.cemconcomp.2012.12.011 ↗
26. NBR 5738: Concrete - Procedure for molding and curing concrete test specimens (in Portuguese: Concreto - Procedimento para moldagem e cura de corpos de prova), Brazilian Association of Technical Standards – ABNT, Brazil, 2016.
27. NBR 5739: Concrete - Compression test of cylindrical specimens (in Portuguese: Concreto - Ensaio de compressão de corpos de prova cilíndricos), Brazilian Association of Technical Standards – ABNT, Brazil, 2018.
28. ASTM C39: Standard test method for compressive strength of cylindrical concrete specimens, American Society for Testing and Materials (ASTM), West Conshohocken, 2018.
29. Aïtcin · 2016 · 15
30. J. Beaudoin, I. Odler, Hydration, setting and hardening of Portland cement. Lea’s chemistry of cement and concrete, 5th edition, Butherworth (2019) 157-250, https://doi.org/10.1016/B978-0-08-100773-0.00005-8.10.1016/B978-0-08-100773-0.00005-8 ↗
31. Nondestructive method for estimation of chloride profiles: correlation between electrical resistivity and holliday-empirical equation10.1061/(ASCE)CO.1943-7862.0001907 ↗
32. Desilication of sodium aluminate solution by Friedel's salt (FS: 3CaO·Al2O3·CaCl2·10H2O)10.1016/j.hydromet.2009.08.010 ↗
33. Removal of arsenic from water by Friedel's salt (FS: 3CaO·Al2O3·CaCl2·10H2O)10.1016/j.jhazmat.2011.08.058 ↗
34. Synthesis, characterization and formation mechanism of friedel’s salt (FS: 3CaO·Al2O3·CaCl2·10H2O) by the reaction of calcium chloride with sodium aluminate10.1007/s11595-015-1104-y ↗
35. Monitoring by electrochemical impedance spectroscopy of mortars subjected to ingress and extraction of chloride ions10.1016/j.conbuildmat.2020.118001 ↗
36. Influence of NaCl on mineral carbonation of CO2 using cement material in aqueous solutions10.1016/j.ces.2012.06.034 ↗
37. Durability of Blended Cement Pastes Containing Ceramic Waste as a Pozzolanic Addition10.1111/jace.12882 ↗
38. Utilization of pretreated fly ash to enhance the chloride binding capacity of cement-based material10.1016/j.conbuildmat.2018.04.178 ↗
39. Ink-Bottle Effect in Mercury Intrusion Porosimetry of Cement-Based Materials10.1006/jcis.2001.7962 ↗
40. Stanish · 2001
41. X-ray Investigations of Some Complex Calcium Aluminate Hydrates and Related Compounds
42. Structural phase transition and high temperature phase structure of Friedels salt, 3CaO · Al2O3 · CaCl2 · 10H2O10.1016/S0008-8846(99)00199-4 ↗
43. Thermodynamic modelling of temperature effects on mineralogy of Portland cement systems containing chloride10.1016/j.cemconres.2019.03.011 ↗
44. Stability of Friedel's salt in carbonated concrete structural elements10.1016/S0008-8846(96)85010-1 ↗
45. Gjørv · 2009