Flexural ductility and crack-controlling capacity of polypropylene fiber reinforced ECC thin sheet with waste superfine river sand based on acoustic emission analysis
Source abstract
Abstract
Engineered cementitious composite (ECC) with waste superfine river sand (WSRS) and polypropylene (PP) fiber is an economical and sustainable cement-based composite material (WSRSPP-ECC), which has the deformation hardening and multi-cracking characteristics, and affinity for engineering promotion. In this study, acoustic emission (AE) technology was used to monitor the flexural damage process of WSRSPP-ECC thin sheets with different deformability. Based on AE signal features, the damage development and accumulation of WSRSPP-ECC thin sheet under flexural load were analyzed. The results showed that AE signal parameters can capture and describe the transition of different damage stages of WSRSPP-ECC thin sheets. The b-value analysis further showed that the internal micro-cracks characteristics of WSRSPP-ECC thin sheets with various deformability were different in the flexural damage process, which was mainly related to the ability of fibers controlling stable cracking. In view of the smaller fluctuation of AE signals in the first two stages of flexural damage process, three modified indirect AE signal feature parameters including average energy, average waveform coefficient and average frequency were proposed. Then the quantitative relationship models between these three indirect AE signal parameters and flexural ductility as well as crack-controlling capacity of WSRSPP-ECC thin sheet were established. Moreover, through the economic analysis, it is corroborated that WSRSPP-ECC has the higher comprehensive cost performance, and it is a new economical cement-based material suitable for practical engineering application. The production of WSRSPP-ECC by replacing PVA fiber and silica sand with PP fiber and WSRS can not only save cost, and also keep the physical performances, which effectively solves the problems of river channel sedimentation and blocking.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Rock Mechanics and Modeling · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Molecular dynamics simulation study on interfacial shear strength between calcium-silicate-hydrate and polymer fibers10.1016/j.conbuildmat.2020.119557 ↗
2. Mechanical, durability, and microstructural properties of macro synthetic polypropylene (PP) fiber-reinforced rubber concrete10.1016/j.jclepro.2019.06.272 ↗
3. Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite10.1016/j.cemconcomp.2016.04.002 ↗
4. Influence of glass powder on the durability properties of engineered cementitious composites10.1016/j.conbuildmat.2020.118199 ↗
5. A feasibility study of strain hardening fiber reinforced fly ash-based geopolymer composites10.1016/j.conbuildmat.2014.02.005 ↗
6. High-performance materials in infrastructure: a review of applied life cycle costing and its drivers - the case of fiber-reinforced composites10.1016/j.jclepro.2015.07.051 ↗
7. Study on PVA fiber surface modification for strain-hardening cementitious composites (PVA-SHCC)10.1016/j.conbuildmat.2018.11.072 ↗
8. Experimental and numerical study on tensile behavior of surface modified PVA fiber reinforced strain-hardening cementitious composites (PVA-SHCC)10.1016/j.conbuildmat.2019.05.083 ↗
9. Utilization and selection of proper fly ash in cost effective green HTPP-ECC design10.1016/j.jclepro.2017.02.117 ↗
10. Influence of matrix flowability, fiber mixing procedure, and curing conditions on the mechanical performance of HTPP-ECC10.1016/j.compositesb.2013.12.076 ↗
11. Static and dynamic mechanical behavior of engineered cementitious composites with PP and PVA fibers
12. Development of UHPC mixtures using natural zeolite and glass sand as replacements of silica fume and quartz sand
13. Effect of filler type and content on mechanical properties and microstructure of sand concrete made with superfine waste sand10.1016/j.conbuildmat.2018.10.167 ↗
14. Properties of fibred sand concrete sprayed by wet-mix process10.1007/s13369-015-1753-3 ↗
15. Reasons for prohibiting mining of river sand. http://baijiahao.baidu.com/s?id=1618340486900289043&wfr=spider&for=pc. (Accessed 28 November 2018).
16. Preliminary analysis of the ductility and crack-control ability of engineered cementitious composite with superfine sand and polypropylene fiber (SSPP-ECC)10.3390/ma13112609 ↗
17. Mechanical performance of engineered cementitious composite incorporating glass as aggregates10.1016/j.jclepro.2020.121113 ↗
18. Mechanical and fracture properties of ultra-high performance concrete (UHPC) containing waste glass sand as partial replacement material10.1016/j.jclepro.2020.123501 ↗
19. Effects of fiber type, volume fraction and aspect ratio on the flexural and acoustic emission behaviors of steel fiber reinforced concrete10.1016/j.conbuildmat.2018.06.065 ↗
20. Damage evaluation of reinforced concrete beams with varying thickness using the acoustic emission technique10.1016/j.conbuildmat.2012.11.099 ↗
21. Time reverse modeling of acoustic emissions in a reinforced concrete beam10.1016/j.ultras.2015.10.014 ↗
22. Fracture mode identification in cementitious materials using supervised pattern recognition of acoustic emission features10.1016/j.conbuildmat.2014.05.015 ↗
23. A study on the efficiency of steel vs. synthetic vs. hybrid fibers on fracture behavior of concrete in flexure using acoustic emission10.1016/j.conbuildmat.2018.12.011 ↗
24. Characterization of damage in concrete beams under bending with Acoustic Emission Technique (AET)10.1016/j.conbuildmat.2018.07.217 ↗
25. Flexural characteristics evaluation for reinforced concrete affected by steel corrosion based on an acoustic emission technique
26. Fracture characterization of multi-layer wire mesh rubberized ferrocement composite slabs by means of acoustic emission10.1016/j.jclepro.2017.03.192 ↗
27. Fracture monitoring of SBS and crumb rubber modified porous asphalt mixtures under compression and splitting testing using acoustic emission technique10.1061/(ASCE)MT.1943-5533.0002689 ↗
28. Acoustic emission parameters and waveforms characteristics of fracture failure process of asphalt mixtures10.1016/j.conbuildmat.2019.04.150 ↗
29. Acoustic emission quantitative evaluation of rejuvenators to restore embrittlement temperatures to oxidized asphalt mixtures10.1016/j.conbuildmat.2016.09.108 ↗
30. Use of nano-SiO2 to develop a high performance green lightweight engineered cementitious composites containing fly ash cenospheres10.1016/j.jclepro.2020.121274 ↗
31. Influence of superplasticizers and retarders on the workability and strength of one-part alkali-activated fly ash/slag binders cured at room temperature10.1016/j.conbuildmat.2019.116891 ↗
32. ASTM/C1018-97, ASTM C1018-97 Standard Test Method for Flexural Toughness and First-Crack Strength of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading). American Society for Testing and Materials (ASTM), USA, 2006.
33. GB/T15231-2008, Test methods for the properties of glassfibre reinforced cement, 2008.
34. ASTM/E1316, ASTM E1316-20a Standard Terminology for Nondestructive Examinations. American Society for Testing and Materials (ASTM), USA, 2020a.
35. Mechanical and self-healing behavior of low carbon engineered cementitious composites reinforced with PP-fibers10.1016/j.conbuildmat.2020.119805 ↗
36. Self healing of longitudinal cracks in utility concrete pole10.3151/jact.10.278 ↗
37. Compressive behavior of engineered cementitious composites under high strain-rate loading10.1061/(ASCE)MT.1943-5533.0001781 ↗
38. Classification of cracking mode in concrete by acoustic emission parameters10.1016/j.mechrescom.2011.03.007 ↗
39. Longitudinal splitting and fiber breakage characterization in graphite epoxy using acoustic emission data
40. Comparison of stiffness measurements and damage investigation techniques for a fatigued and post-impact fatigued GFRP composite obtained by RTM process10.1016/S1359-835X(99)00061-5 ↗
41. Use of acoustic emission to characterize corrosion fatigue damage accumulation in glass fiber reinforced polyester laminates10.1002/pc.10392 ↗
42. Damage fracture characterization of pervious asphalt considering temperature effect based on acoustic emission parameters10.1016/j.engfracmech.2018.10.007 ↗
43. Experimental research on bond behavior of reinforced recycled aggregate concrete based on the acoustic emission technique10.1016/j.conbuildmat.2018.10.054 ↗
44. Acoustic emission data analyses based on crumb rubber concrete beam bending tests10.1016/j.engfracmech.2018.05.016 ↗
45. A new qualitative acoustic emission parameter based on Shannon's entropy for damage monitoring10.1016/j.ymssp.2017.08.007 ↗
46. Relationship between AE energy and fracture energy of plain concrete beams: Experimental study10.1061/(ASCE)0899-1561(2008)20:3(212) ↗
47. Experimental research on mechanical properties of different type of concrete after high temperature
48. Experimental study on the tensile performance of steel fiber reinforced concrete
49. An economical ultra-high ductile engineered cementitious composite with large amount of coarse river sand10.1016/j.conbuildmat.2018.12.207 ↗
50. Yatai Building Materials Mall-Product Center. http://www.yataimall.com/Cement?proLeiXing=1. 2020).