Constitutive model of steel fiber reinforced concrete by coupling the fiber inclining and spacing effect
Source abstract
Abstract
Abstract This study aims to establish a new constitutive model considering the fiber spacing and inclining effect for steel fiber reinforced concrete (SFRC) with high fiber content. To consider the influence of the fiber spacing, the fiber group effect factor is proposed for revising the reinforcement effect, and the critical fiber volume fraction is determined as 4.58%. Moreover, the fiber inclined effect factor is established by coupling the snubbing and matrix spalling effect factors, with the optimal inclining angle calculated as 32 degrees. The proposed constitutive model is introduced into Abaqus by the Umat of Fortran code, and the finite element models are established to simulate the tensile and flexural tests of SFRC. The results show that as for the tensile test of SFRC, as the fiber volume increased from zero to 7%, and 10%, the peak stress increased as high as 2.2, and 3.8 times and the strain at the peak point increased 2 and 3.5 times; and under the four-point bending test of SFRC, the toughness index has been greatly improved and reach 36. By comparing with the experimental results, it can be obtained that the proposed constitutive model is feasible for exploring the mechanical property of SFRC.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Innovations in Concrete and Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. Tensile behavior of ultra-high performance concrete: analytical model and experimental validation10.1016/j.conbuildmat.2018.12.137 ↗
2. Mechanical performance and corrosion damage of steel fibre reinforced concrete-a multiscale modelling approach10.1016/j.conbuildmat.2019.117847 ↗
3. Tension softening of fibre-reinforced cementitious composites10.1016/S0958-9465(97)00027-9 ↗
4. Tensile failure modes of random discontinuous fiber reinforced brittle matrix composites10.1061/(ASCE)0733-9399(1992)118:11(2246) ↗
5. Mechanical properties of ultra-high-performance fiber-reinforced concrete: a review10.1016/j.cemconcomp.2016.08.001 ↗
6. Damage mechanism of ultra-high performance fibre reinforced concrete at different stages of direct tensile test based on acoustic emission analysis10.1016/j.conbuildmat.2020.120927 ↗
7. Backcalculation of residual tensile strength of regular and high performance fiber reinforced concrete from flexural tests10.1016/j.conbuildmat.2014.07.037 ↗
8. A discrete-continuum coupled finite element modelling approach for fibre reinforced concrete10.1016/j.cemconres.2018.01.010 ↗
9. Mesoscale characterization of fracture properties of steel fiber-reinforced concrete using a lattice-particle model10.3390/ma10020207 ↗
10. Lattice discrete particle modeling of fiber reinforced concrete: experiments and simulations10.1016/j.euromechsol.2015.12.002 ↗
11. Research on meso stochastic damage constitutive model of fiber concrete under compression
12. A continuum damage mechanics model for concrete reinforced with randomly distributed short fibers10.1016/S0045-7949(00)00045-6 ↗
13. Cyclic tensile behavior of SFRC: experimental research and analytical model10.1016/j.conbuildmat.2018.09.140 ↗
14. Pullout behavior of inclined steel fiber in an ultra-high strength cementitious matrix10.1016/j.conbuildmat.2010.03.009 ↗
15. Effects of fiber length and fiber orientation distributions on the tensile strength of short-fiber-reinforced polymers10.1016/S0266-3538(96)00072-3 ↗
16. Effects of fiber length and orientation distribution on the elastic modulus of short fiber reinforced thermoplastics10.1002/pc.750090105 ↗
17. An experimental study on pullout and tensile behavior of ultra-high-performance concrete reinforced with various steel fibers10.1016/j.conbuildmat.2019.02.058 ↗
18. Effect of fiber spacing on dynamic pullout behavior of multiple straight steel fibers in ultra-high-performance concrete10.1016/j.conbuildmat.2019.03.171 ↗
19. Effects of fiber shape and distance on the pullout behavior of steel fibers embedded in ultra-high-performance concrete10.1016/j.cemconcomp.2019.05.006 ↗
20. Effect of fiber length and placement method on flexural behavior, tension-softening curve, and fiber distribution characteristics of UHPFRC10.1016/j.conbuildmat.2014.04.007 ↗
21. Bond-slip mechanisms of steel fibers in concrete
22. The pull-out behavior of straight and hooked-end steel fiber from hybrid fiber reinforced cementitious composite: Experimental study and analytical modelling10.1016/j.compstruct.2018.08.066 ↗
23. The effect of fiber orientation on the post-cracking behavior of steel fiber reinforced concrete under bending and uniaxial tensile tests10.1016/j.cemconcomp.2018.07.012 ↗
24. Effect of inclining angle, bundling and surface treatment on synthetic fibre pull-out from a cement matrix10.1016/0010-4361(90)90005-H ↗
25. Optimal steel fiber strength for reinforcement of cementitious materials10.1061/(ASCE)0899-1561(1999)11:2(116) ↗
26. Influence of fiber type and fiber orientation on cracking and permeability of reinforced concrete under tensile loading10.1016/j.cemconres.2017.01.004 ↗
27. A composite plasticity model for concrete10.1016/0020-7683(95)00060-N ↗
28. Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites Part VI. Interpretation of fiber pull-out curves10.1016/0921-5093(91)90781-H ↗
29. Tests of basic physical parameters of steelconcrete interface
30. High loading-rate pullout behavior of inclined deformed steel fibers embedded in ultra-high performance concrete10.1016/j.conbuildmat.2017.05.018 ↗
31. The cracking of composites consisting of discontinuous ductile fibres in a brittle matrix effect of fibre orientation
32. Uniaxial tensile behaviour of concrete reinforced with randomly distributed short fibres
33. The Statistical Theory of the Strength of Bundles of Threads. I
34. S.K. Garg, V. Svalbonas, G.A. Gurtman, Analysis of structural composite materials, Marcel Dekker, Inc., New York, 1973, pp. 18-23.
35. Implementation of the Tresca yield criterion in finite element analysis of burst capacity of pipelines10.1016/j.ijpvp.2019.03.037 ↗
36. Micromechanics based design for pseudo strain-hardening in cementitious composites
37. ASTM C 1609/C 1609M. Standard test method for flexural performance of fiber-reinforced concrete (using beam with third-point loading). ASTM International, West Conshohocken, PA, 2012, pp. 1–9.
38. ASTM C 39/39M. Standard test method for compressive strength of cylindrical concrete specimens. ASTM International, West Conshohocken, PA, 2014, pp. 1–7.