journal article·2021-04Open access

The effect of hollow glass microspheres, carbon nanofibers and activated carbon powder on mechanical and dry shrinkage performance of ultra-lightweight engineered cementitious composites

Farhad Aslani, Ayoub Dehghani, Lining Wang

Abstract

Abstract Hollow glass microspheres (HGMs) containing a large amount of recycled glass are used to develop ultra-lightweight engineered cementitious composites (ECCs), which are more sustainable comparing to standard ECC. Carbon nanofibers (CNFs) and activated carbon powder (ACP) were used to improve the mechanical and shrinkage properties of ultra-lightweight ECCs. The parameters investigated were flowability, compressive strength, flexural toughness, strain-hardening performance, and dry shrinkage. ECCs exhibited a density of 1449–1282 kg/m3 by replacing 60%–100% of its fly ash with HGMs, classified as ultra-lightweight ECCs. The inclusion of HGMs improved the flowability but reduced the compressive and flexural strength of composites. Results confirm the feasibility of developing an ultra-lightweight ECC with a compressive strength of 28.7 MPa and a dry shrinkage strain of less than 1250 microstrain when the composite is reinforced with CNFs. It is also shown that CNFs is more effective than ACP to control dry shrinkage and to overcome the adverse effect of HGMs inclusion on flexural performance of ECCs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Studies on mechanical properties of concrete containing waste glass aggregate10.1016/j.cemconres.2004.02.006 ↗
2. Effects of recycled fine glass aggregates on the properties of dry–mixed concrete blocks10.1016/j.conbuildmat.2012.09.017 ↗
3. Effects of wet-grinded superfine waste glass on the fresh properties and reaction characteristic of cement pastes10.1016/j.conbuildmat.2020.118593 ↗
4. The effect of nano-silica and waste glass powder on mechanical, rheological, and shrinkage properties of UHPC using response surface methodology10.1016/j.jmrt.2018.06.011 ↗
5. Waste glass powder as cement replacement in concrete10.3151/jact.12.468 ↗
6. G. Qi, K. Budd, M. Staiger, J. Tangeman, L. Visser, Hollow microspheres, Patent Application Publication, US 2013/0344337 A1, 2013
7. Preparation and characterization of hollow glass microspheres (HGMs) for hydrogen storage using urea as a blowing agent10.1016/j.mee.2014.06.017 ↗
8. Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)
9. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness
10. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC)
11. Fiber-bridging constitutive law of engineered cementitious composites10.3151/jact.6.181 ↗
12. On Engineered Cementitious Composites (ECC) - A Review of the material and its applications10.3151/jact.1.215 ↗
13. V.C. Li, Engineered Cementitious Composites (ECC), Bendable concrete for sustainable and resilient infrastructure, Springer, Berlin, Heidelberg, 2019. doi:10.1007/978-3-662-58438-5.10.1007/978-3-662-58438-5 ↗
14. ACI Committee 231, Guide for structural lightweight aggregate concrete, ACI 213R-03, American Concrete Institute, 2003. doi:10.1016/0262-5075(79)90004-6.10.1016/0262-5075(79)90004-6 ↗
15. S. Chandra, L. Berntsson, Lightweight aggregate concrete: science, technology, and applications, William Andrew Publishing, New York, n.d.
16. Mechanical and thermal properties of green lightweight engineered cementitious composites10.1016/j.conbuildmat.2013.07.104 ↗
17. W.S, L.V. Li Wang S, Lightweight engineered composites, in: H.W. Reinhardt, A.E. Naaman (Eds.), Fourth Int’l RILEM Work. High Perform. Fiber Reinf. Cem. Compos. (HPFRCC 4), RILEM, 2003: pp. 379–90.
18. Use of hollow glass microspheres and hybrid fibres to improve the mechanical properties of engineered cementitious composite10.1016/j.conbuildmat.2018.03.172 ↗
19. Development of strain-hardening lightweight engineered cementitious composites using hollow glass microspheres10.1002/suco.201900096 ↗
20. Light-weight high-strength hollow glass microspheres and bamboo fiber based hybrid polypropylene composite: A strength analysis and morphological study10.1016/j.compositesb.2016.10.052 ↗
21. Properties of light-weight extruded concrete with hollow glass microspheres10.1016/j.proeng.2016.08.214 ↗
22. Ultra-lightweight engineered cementitious composite using waste recycled hollow glass microspheres10.1016/j.jclepro.2019.119331 ↗
23. Integrally hydrophobic cementitious composites made with waste amorphous carbon powder10.1016/j.conbuildmat.2019.117238 ↗
24. Investigations into the role of activated carbon in a moisture-blocking cement formulation10.1023/B:JTAN.0000042169.37321.24 ↗
25. Carbon nanofiber cementitious composites: Effect of debulking procedure on dispersion and reinforcing efficiency10.1016/j.cemconcomp.2012.10.009 ↗
26. Review of nanocarbon-engineered multifunctional cementitious composites10.1016/j.compositesa.2014.12.002 ↗
27. The effect of carbon nanofibers on fresh and mechanical properties of lightweight engineered cementitious composite using hollow glass microspheres10.1177/0021998319827078 ↗
28. The effect of carbon powder addition on the properties of hematite radiation shielding concrete10.1016/j.pnucene.2008.10.002 ↗
29. Polyacrylonitrile/carbon nanofiber nanocomposite fibers10.1016/j.compscitech.2013.08.036 ↗
30. Effect of the cementitious paste density on the performance efficiency of carbon nanofiber in concrete nanocomposite10.1016/j.conbuildmat.2013.06.094 ↗
31. Tensile properties of graphene nano-platelets reinforced polypropylene composites10.1016/j.compositesb.2016.04.011 ↗
32. AS (Standards Australia), General purpose and blended cements, AS S3972, Sydney, Australia, 2010.
33. AS/NZS (Australian/New Zealand Standard), Supplementary cementitious materials Part 1: Fly ash, AS/NZS 3582.1, Sydney, Australia; Wellington, New Zealand, 2016.
34. AS/NZS (Australian/New Zealand Standard), Supplementary cementitious materials Part 3: Amorphous silica, AS/NZS 3582.3, Sydney, Australia; Wellington, New Zealand, 2016.
35. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
36. Influence of aggregate type and size on ductility and mechanical properties of engineered cementitious composites
37. Pyrograf products Inc., Pyrograf®-III Carbon Nanofiber, (n.d.). http://pyrografproducts.com/nanofiber.html (accessed September 23, 2020).
38. AS (Australian standard), Chemical admixtures for concrete, mortar and grout Part 1: Admixtures for concrete, AS 1478.1, Sydney, NSW, Australia, 2000.
39. ASTM 157, Standard test method for length change of hardened hydraulic-cement mortar and concrete, West Conshohocken, PA, United States, 2008. doi:10.1002/9781118702956.ch15.10.1002/9781118702956.ch15 ↗
40. Mix design and properties assessment of Ultra-High Performance Fibre Reinforced Concrete (UHPFRC)10.1016/j.cemconres.2013.11.002 ↗
41. Physical and mechanical properties of porous concrete using waste activated carbon
42. Properties of ultra-lightweight cement composites with nano-silica10.1016/j.conbuildmat.2018.11.225 ↗
43. Flexural fatigue behavior of ultra-lightweight cement composite and high strength lightweight aggregate concrete10.1016/j.conbuildmat.2018.03.276 ↗
44. The synergistic effects of shape memory alloy, steel, and carbon fibres with polyvinyl alcohol fibres in hybrid strain-hardening cementitious composites10.1016/j.conbuildmat.2020.119061 ↗
45. Effect of graphite nanoplatelets and carbon nanofibers on rheology, hydration, shrinkage, mechanical properties, and microstructure of UHPC10.1016/j.cemconres.2018.01.001 ↗
46. Locking Front Model for pull-out behaviour of PVA microfibre embedded in cementitious matrix10.1016/j.cemconcomp.2019.04.031 ↗
47. Contribution of CNTs/CNFs morphology to reduction of autogenous shrinkage of Portland cement paste10.1007/s11709-016-0331-4 ↗
48. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
49. The use of microfine cement to enhance the efficacy of carbon nanofibers with respect to drying shrinkage crack resistance of portland cement mortars10.1016/j.cemconcomp.2017.08.006 ↗