Novel fiber reinforced polymers (FRP)-ultrahigh performance concrete (UHPC) hybrid beams with improved shear performance
Source abstract
Abstract
Abstract Fiber reinforced polymer (FRP) and ultrahigh performance concrete (UHPC) are two durable and high strength construction materials. FRP-UHPC hybrid beam is a durable and efficient bridge superstructure, however, its capacity is limited by the low shear strength of FRP profiles. This paper investigated two ways to improve the shear performance of FRP-UHPC hybrid beams: externally bonded (EB) carbon FRP (CFRP) sheets to the webs of glass FRP (GFRP) profiles, and increasing the number of webs of FRP profiles. Nine FRP-UHPC hybrid beams were tested under bending loads, which indicates: (i) EB CFRP sheets to GFRP webs substantially increased the shear capacity and the rigidity of FRP-concrete hybrid beams. (ii) the built-up II-shaped FRP profiles had almost doubled the shear capacity of FRP-concrete hybrid beams using I-shaped profiles. (iii) With UHPC height increased from 30 mm to 80 mm, the failure mode changed from the shear fracture of UHPC slab to the interfacial disconnection. (iv) With the decrease of shear span length from 700 mm to 120 mm, the shear capacity was largely improved. In summary, EB CFRP sheets and using double web GFRP profiles are two effective ways to improve the shear performance of FRP-UHPC hybrid beams.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. Advanced composite bridge decking system—project ASSET10.2749/101686602777965522 ↗
2. A comprehensive review on mechanical properties of pultruded FRP composites subjected to long-term environmental effects
3. Durability of pultruded GFRP tubes subjected to seawater sea sand concrete and seawater environments10.1016/j.conbuildmat.2020.118399 ↗
4. Behavior and ductility of simple and continuous FRP reinforced beams10.1061/(ASCE)1090-0268(1998)2:4(186) ↗
5. Multiscale strength prediction of fiber-reinforced polymer cables based on random strength distribution10.1016/j.compscitech.2020.108228 ↗
6. Innovative compound-type anchorage system for a large-diameter pultruded carbon/glass hybrid rod for bridge cable10.1617/s11527-020-01510-y ↗
7. Flexural behavior of a hybrid FRP and lightweight concrete sandwich bridge deck10.1016/j.compositesa.2006.07.007 ↗
8. Composite concrete/GFRP slabs for footbridge deck systems10.1016/j.compstruct.2010.02.005 ↗
9. Flexural behavior of novel hybrid multicell GFRP-concrete beam
10. The first Polish road bridge made of FRP composites10.2749/101686617X14881932436339 ↗
11. Recent all-composite and hybrid fibre-reinforced polymer bridges and buildings10.1002/pse.66 ↗
12. Kings stormwater channel and I-5/Gilman bridges, USA10.2749/101686699780481655 ↗
13. Structural behaviour of an all-composite road bridge10.1016/j.compstruct.2018.03.042 ↗
14. Hybrid bridges in Texas
15. Experimental and analytical studies on shear behaviors of FRP-concrete composite sections10.1016/j.engstruct.2020.110649 ↗
16. Description of a traffic bridge of the Cantabrian SpeedWay made of composite materials10.3989/mc.2006.v56.i284.20 ↗
17. Bolted shear connection of FRP-concrete hybrid beams10.1061/(ASCE)CC.1943-5614.0000845 ↗
18. Flexural performance of a hybrid GFRP-concrete bridge deck with composite T-shaped perforated rib connectors10.1016/j.compstruct.2018.03.105 ↗
19. Short term testing of hybrid T beam made of new prepreg material10.1061/(ASCE)1090-0268(2003)7:2(135) ↗
20. An investigation of the composite action of an FRP/concrete prismatic beam10.1016/S0950-0618(99)00050-1 ↗
21. Durability of GFRP-concrete adhesively bonded connections: experimental and numerical studies10.1016/j.engstruct.2018.05.018 ↗
22. Testing of hybrid FRP composite beams in bending10.1016/j.compositesb.2003.08.010 ↗
23. Composite behaviour of a hybrid FRP bridge girder and concrete deck10.1260/1369-4332.15.4.589 ↗
24. GFRP–concrete hybrid cross-sections for floors of buildings10.1016/j.engstruct.2008.04.021 ↗
25. Design and field evaluation of hybrid FRP/reinforced concrete superstructure system10.1061/(ASCE)BE.1943-5592.0000002 ↗
26. Perforated FRP ribs for shear connecting of FRP-concrete hybrid beams/decks10.1016/j.compstruct.2016.05.039 ↗
27. Experimental studies on FRP-concrete composite deck with FRP perfobond shear connectors10.1007/978-3-642-17487-2_46 ↗
28. Joining techniques for fiber reinforced polymer composite bridge deck systems10.1016/j.compstruct.2004.07.016 ↗
29. Development of innovative hybrid sandwich panel slabs: advanced numerical simulations and parametric studies10.1016/j.compstruct.2016.05.072 ↗
30. Experimental investigation on hybrid GFRP-concrete decks with T-shaped perforated ribs subjected to negative moment10.1016/j.conbuildmat.2017.10.032 ↗
31. Barbaran · 2002
32. Development of innovative hybrid sandwich panel slabs: experimental results10.1016/j.compstruct.2015.07.114 ↗
33. Flexural performance of innovative hybrid sandwich panels with special focus on the shear connection behavior10.1016/j.compstruct.2016.10.066 ↗
34. Mechanical performance of the wet-bond interface between FRP plates and cast-in-place concrete10.1061/(ASCE)CC.1943-5614.0000472 ↗
35. Shear-bond behavior of the interface between FRP profiles and concrete by the double-lap push shear method10.1061/(ASCE)CC.1943-5614.0000795 ↗
36. Experimental study of GFRP-concrete hybrid beams with low degree of shear connection10.1016/j.conbuildmat.2015.10.024 ↗
37. Fiberline, Design manual, Kolding, Denmark, 2002.
38. Strongwell, Design manual, Strongwell Corporation, Bristol, Va, 2007.
39. Top Glass, Technical data, 2008. http://www.topglass.it/. (accessed July 15th, 2020).
40. Creative Pultrusions, Technical data, 2008. http://www.creativepultrusions.com/(accessed July 15th, 2020).
41. Innovative design of FRP combined with concrete
42. Governing failure criterion of short-span hybrid FRP-UHPC beams subjected to high shear forces10.1016/j.compstruct.2017.11.003 ↗
43. Behaviour of hybrid FRP–UHPC beams subjected to static flexural loading10.1016/j.compositesb.2011.07.004 ↗
44. Experimental tests and analytical model of concrete-GFRP hybrid beams under flexure10.1016/j.compstruct.2017.07.059 ↗
45. FRP stay-in-place form and shear key connection for FRP-concrete hybrid beams/decks10.1016/j.compstruct.2018.03.011 ↗
46. All FRP and FRP-concrete hybrid components for bridges: experiments, theories and case study
47. Rehabilitation of rectangular simply supported RC beams with shear deficiencies using CFRP composites10.1016/S0950-0618(02)00002-8 ↗
48. Developing optimized strengthening systems for shear-deficient concrete members10.1002/suco.201600187 ↗
49. Shear strengthening of reinforced concrete beams using epoxy-bonded FRP composites
50. Sibeier, http://sibeier.frpapp.com/introduce/ (accessed July 15th, 2020).
51. GB 50608–2010, Technical Code for Infrastructure Application of FRP Composites; China Architecture and Building Press: Beijing, China, 2011. (in Chinese).
52. GB 50010-2010, Code for Design of Concrete Structures. China Building Industry Press, Beijing, China, 2011 (in Chinese).
53. Bilinear load-deflection model of fiber-reinforced polymer–concrete composite beam with interface slip10.1177/1687814015590312 ↗
54. Experimental investigation of the natural bonding strength between stay-in-place form and concrete in FRP-concrete decks/beams10.3390/app9050913 ↗