Preparation and mechanical properties of asphalt mixtures reinforced by modified bamboo fibers
Source abstract
Abstract
Abstract Cracking resistance and durability are the main concerns in asphalt mixture for pavement. The addition of fibers is an effective way for reinforcing asphalt mixture. Bamboo fibers (BFs) show unique characteristics such as high specific strength and modulus, renewability and low cost. Thus, BFs mechanically extracted from green bamboos were used to improve the mechanical properties of asphalt mixture and thus increase the service life of asphalt pavement. For improving the poor interfacial adhesion resulted from the hydrophobicity of asphalt and the hydrophilicity of BFs, a melamine–formaldehyde (MF) copolymer was synthesized and used to modify the BFs. Fourier transform infrared spectroscopy (FTIR), X-ray photoelectronic spectroscopy (XPS), and nuclear magnetic resonance (NMR) analyses were conducted to reveal the surface chemistry of BFs. The results proved that the MF copolymer was grafted onto the surface of BFs via the formation of covalent bonding between hydroxyl groups of BFs and amino group of melamine. The mechanical properties of the asphalt mixture were evaluated by Marshall stability, direct tensile, and indirect tensile tests. Results showed that the addition of modified BFs increased the stability and the tensile strength of the asphalt mixture. SEM images of the fractured surface of asphalt mixture indicated that strong adhesion was formed between the modified BFs and asphalt matrices.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Asphalt Pavement Performance Evaluation · Bamboo properties and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Investigation of usability of basalt fibers in hot mix asphalt concrete10.1016/j.conbuildmat.2013.04.048 ↗
2. Linearized approach for predicting thermal stresses in asphalt pavements due to environmental conditions10.1061/(ASCE)0899-1561(2008)20:2(118) ↗
3. Utilisation of natural fibre as modifier in bituminous mixes: a review10.1016/j.conbuildmat.2013.12.037 ↗
4. The effect of polypropylene fibers on asphalt performance10.1016/j.buildenv.2007.02.011 ↗
5. Evaluating the fatigue properties of hot mix asphalt reinforced by recycled PET fibers using 4-point bending test10.1016/j.conbuildmat.2017.02.082 ↗
6. The effects of fibers on the performance of bituminous mastics for road pavements10.1016/j.compositesb.2016.03.069 ↗
7. Investigation of the dynamic and fatigue properties of fiber-modified asphalt mixtures10.1016/j.ijfatigue.2009.04.008 ↗
8. Assessment of suitability of coconut shell charcoal as a filler in stone mastic asphalt
9. Analysis of use of natural fibers and asphalt rubber binder in discontinuous asphalt mixtures10.1016/j.conbuildmat.2011.06.030 ↗
10. The influence of natural and synthetic fibers on low temperature mixed mode I+II fracture behavior of warm mix asphalt10.1016/j.engfracmech.2017.06.003 ↗
11. Kar · 2012
12. Atmospheric pressure plasma activation of polymers and composites for adhesive bonding10.7569/RAA.2013.097302 ↗
13. Effects of the atmospheric plasma treatments on surface and mechanical properties of flax fiber and adhesion between fiber–matrix for composite materials10.1016/j.compositesb.2012.09.042 ↗
14. A review of Australian research into natural fiber cement composites10.1016/j.cemconcomp.2004.09.003 ↗
15. Mechanical properties of hemp fiber reinforced cement: Influence of the fiber/matrix interaction10.1016/j.jeurceramsoc.2007.05.019 ↗
16. Effect of chemical modification of luffa cylindrical fibers on the mechanical and hygrothermal behaviours of polyester/luffa composites10.15376/biores.6.4.3836-3849 ↗
17. Experimental study–the use of bamboo fiber using SMA methodology in coarse aggregate
18. Munda · 2013
19. Laboratory investigation on the use of bamboo fiber in asphalt mixtures for enhanced performance10.1007/s13369-018-3490-x ↗
20. Experimental study of fibers in stabilizing and reinforcing asphalt binder10.1016/j.fuel.2009.08.020 ↗
21. Enhanced mechanical properties and water resistance of bamboo fiber-unsaturated polyester composites coupled by isocyanatoethyl methacrylate10.1007/s00226-014-0668-6 ↗
22. Influence of chemical treatments on the mechanical and water absorption properties of bamboo fiber composites10.1177/0731684410383064 ↗
23. Regulating tannic acid-crosslinked epoxidized soybean oil oligomers for strengthening and toughening bamboo fibers-reinforced poly(lactic acid) biocomposites10.1016/j.compscitech.2019.107709 ↗
24. ASTM D1754, Standard Test Method for Effect of Heat and Air on Asphaltic Materials, Thin-Film Oven Test, 2015.
25. ASTMD6927, Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures, 2015.
26. ASTMD6931, Standard Test Method for Indirect Tensile Strength (IDT) of Asphalt Mixtures, 2017.
27. JTGF40-2004, Construction Technological Specification of Asphalt Mixture Pavement of Highway, Ministry of Transport of the People’s Republic of China.
28. Crosslinking between wood and melamine/formaldehyde
29. Melamine polymerization in organic solutions and waterlogged archaeological wood studied by FTIR spectroscopy10.1016/j.culher.2016.09.009 ↗
30. Bamboo fibers grafted with a soybean-oil-based monomer for its unsaturated polyester composites10.1007/s10570-016-0969-z ↗
31. Reproducible XPS on biopolymers: cellulose studies10.1002/sia.1827 ↗
32. Evaluation of surface lignin on cellulose fibers with XPS10.1016/S0169-4332(98)00920-9 ↗
33. Surface characterization of unbleached kraft pulps by means of ESCA10.1007/BF00819664 ↗
34. Mechanical characterization of single bamboo fibers with nanoindentation and microtensile technique10.1515/hf.2011.009 ↗