journal article·2022-01

Use of ladle furnace slag as supplementary cementitious material before and after modification by rapid air cooling: A comparative study of influence on the properties of blended cement paste

Kuizhen Fang, Jihui Zhao, Dongmin Wang, Huangqi Wang, Ziliang Dong

Publisher page

Abstract

Abstract Ladle furnace slag (LFS) exhibits excellent early hydration activity due to its special mineral component C12A7. The mineral phase of LFS was optimized and modified by rapid air cooling, which could effectively improve the volume stability and the content of active substances in the amorphous phase of the LFS. To study the performance advantages of LFS after modification by rapid air cooling (CLFS), the hydration processes, physical and mechanical properties, and volume stability of the LFS-OPC (ordinary Portland cement) system before and after modification were compared and analyzed from a macroscopic perspective. The microstructures, compositions, and pore structures of the CLFS-OPC hardened pastes at different ages were studied. The results showed that both CLFS and LFS can accelerate the hydration and setting of cement significantly. With the increase in the LFS content, the second hydration exothermic peak of cement gradually became divided into two main exothermic peaks, which were mainly due to aluminate hydration and silicate hydration. Compared with the LFS-OPC, the CLFS-OPC exhibited a faster hydration rate and shorter setting time. In addition, the mechanical properties and volume stability of the CLFS-OPC were better than those of the original system due to the existence of more active β-C2S crystal forms and smaller f-MgO particles in the CLFS, which provides a good foundation for the use of CLFS to promote the setting of cement-based cementitious materials. CLFS is recommended to be used as mineral component regulator with a dosage of 5% ∼ 10%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Properties of pervious concrete with steel slag as aggregates and different mineral admixtures as binders10.1016/j.conbuildmat.2020.119543 ↗
2. Green concrete with ground granulated blast-furnace slag activated by desulfurization gypsum and electric arc furnace reducing slag10.1016/j.jclepro.2020.122212 ↗
3. Recycling and utilization of high volume converter steel slag into CO2 activated mortars - The role of slag particle size10.1016/j.resconrec.2020.104883 ↗
4. Performance Improvement of Asphalt Concretes Using Steel Slag as a Replacement Material10.1061/(ASCE)MT.1943-5533.0003306 ↗
5. A Roadmap for Production of Cement and Concrete with Low-CO2 Emissions10.1007/s12649-020-01180-5 ↗
6. Setting controlling of lithium slag-based geopolymer by activator and sodium tetraborate as a retarder and its effects on mortar properties10.1016/j.cemconcomp.2020.103598 ↗
7. Environmental and economical friendly ultra-high performance-concrete incorporating appropriate quarry-stone powders10.1016/j.jclepro.2020.121112 ↗
8. Characteristics and cementitious properties of ladle slag fines from steel production10.1016/S0008-8846(01)00707-4 ↗
9. Ladle furnace slag in asphalt mixes10.1016/j.conbuildmat.2016.06.085 ↗
10. Study on engineering properties of alkali-activated ladle furnace slag geopolymer10.1016/j.conbuildmat.2016.07.068 ↗
11. Effect of granulometry on cementitious properties of ladle furnace slag10.1016/j.cemconcomp.2011.11.015 ↗
12. Ladle metallurgy stainless steel slag as a raw material in Ordinary Portland Cement production: a possibility for industrial symbiosis10.1016/j.jclepro.2015.06.006 ↗
13. EVALUATION OF LADLE SLAG AS A POTENTIAL MATERIAL FOR BUILDING AND CIVIL ENGINEERING
14. Production of durable self-compacting concrete using ladle furnace slag (LFS) as filler material
15. Characterization of Calcium Aluminate Cement Phases when in Contact with Simulated Body Fluid
16. Enhanced long-term strength and durability of shotcrete with high-strength C(12)A(7) mineral-based accelerator10.1016/j.cemconres.2015.05.020 ↗
17. Influence of a C(12)A(7) mineral-based accelerator on the strength and durability of shotcrete10.1016/j.cemconres.2007.09.016 ↗
18. Effects of crystallinity and silica content on the hydration kinetics of 12CaO center dot 7Al(2)O(3)10.1016/j.cemconcomp.2005.08.001 ↗
19. Rheology and agglomerate structure of fresh geopolymer pastes with different Ms ratio of waterglass10.1016/j.conbuildmat.2020.118881 ↗
20. Hydration studies of calcium sulfoaluminate cements blended with fly ash10.1016/j.cemconres.2013.07.010 ↗
21. Hydration properties of ladle furnace slag powder rapidly cooled by air10.1016/j.conbuildmat.2016.03.089 ↗
22. Reactivity of coal fly ash used in cementitious binder systems: A state-of-the-art overview10.1016/j.fuel.2021.121031 ↗
23. Influence of the degree of crystallinity of added nano-alumina on strength and reaction products of the CaO-activated GGBFS system10.1016/j.conbuildmat.2021.123647 ↗
24. Hydration properties and kinetic characteristics of blended cement containing lithium slag powder10.1016/j.jobe.2021.102287 ↗
25. Utilization of Ladle Furnace slag from a steelwork for laboratory scale production of Portland cement10.1016/j.conbuildmat.2015.07.075 ↗
26. Performance-Based Characterization of Bituminous Mortars Prepared With Ladle Furnace Steel Slag10.3390/su12051777 ↗
27. Behavior of self compacting concrete containing ladle furnace slag and steel fiber reinforcement10.1016/j.matdes.2014.03.030 ↗
28. Methods for Improving Volume Stability of Steel Slag as Fine Aggregate10.1007/s11595-007-5737-3 ↗
29. Understanding expansion in calcium sulfoaluminate-belite cements10.1016/j.cemconres.2011.07.010 ↗
30. Optimization of gypsum and slag contents in blended cement containing slag10.1016/j.cemconcomp.2020.103674 ↗
31. The Characteristics of the Phase Transition of Air-Quenched Ladle Furnace Slag10.1007/s11837-020-04464-2 ↗
32. Experimental methods to determine the feasibility of steel slags as supplementary cementitious materials10.1016/j.conbuildmat.2019.01.196 ↗
33. Synthesis and densification of single-phase mayenite (C12A7)10.1016/j.jeurceramsoc.2016.06.014 ↗
34. Fabrication of high-density electron-doped 12CaO center dot 7Al(2)O(3) thin films by physical and chemical processes10.2109/jcersj2.117.395 ↗
35. Thompson · Hastings, Rietveld refinement of Debye-Scherrer synchrotron X-ray data from Al2O3 · 1987 · 20 · 79
36. Z. Liu, J. Wang, Q. Jiang, G. Cheng, L. Li, Y. Kang, D.J.J.o.C.P. Wang, A green route to sustainable alkali-activated materials by heat and chemical activation of lithium slag, 225(JUL.10) (2019) 1184-1193.10.1016/j.jclepro.2019.04.018 ↗
37. Mechanical mechanism for expansion and crack of mortars containing basic oxygen furnace slag sand10.1179/1432891714Z.0000000001209 ↗
38. Optical and dielectric properties of nano-sized tricalcium aluminate hexahydrate (C3AH6) cement10.1016/j.conbuildmat.2018.05.180 ↗
39. Hydration of Portland cement with additions of calcium sulfoaluminates10.1016/j.cemconres.2012.10.011 ↗
40. Influence of the calcium sulphate source on the hydration mechanism of Portland cement-calcium sulphoaluminate clinker-calcium sulphate binders10.1016/j.cemconcomp.2011.03.005 ↗
41. A hydration study of various calcium sulfoaluminate cements10.1016/j.cemconcomp.2014.07.002 ↗
42. Influence of a thermal cycle at early age on the hydration of calcium sulphoaluminate cements with variable gypsum contents10.1016/j.cemconres.2010.10.001 ↗
43. Effect of sulfur on the polymorphism and reactivity of dicalcium silicate of Portland clinker10.1590/S0366-69132011000100017 ↗
44. Effect of nano-silica on hydration and conversion of calcium aluminate cement10.1016/j.conbuildmat.2018.03.011 ↗
45. A high-pressure X-ray diffraction study of the crystalline phases in calcium aluminate cement paste10.1016/j.cemconres.2018.03.004 ↗
46. Influence of mechanical activation on the synthesis and hydraulic activity of calcium dialuminate10.1016/j.ceramint.2005.04.017 ↗
47. Hydration behavior of spinel containing high alumina cement from high titania blast furnace slag10.1016/j.cemconres.2015.09.019 ↗
48. Hydration process of the aluminate 12CaO center dot 7Al(2)O(3)-assisted Portland cement-based solidification/stabilization of sewage sludge10.1016/j.conbuildmat.2011.12.049 ↗
49. Ladle slag cement - Characterization of hydration and conversion10.1016/j.conbuildmat.2018.10.179 ↗
50. Study on Cementitious Properties and Hydration Characteristics of Steel Slag10.15244/pjoes/74133 ↗
51. Expansion mechanisms in calcium aluminate and sulfoaluminate systems with calcium sulfate10.1016/j.cemconres.2013.11.011 ↗
52. Aluminum-rich belite sulfoaluminate cements: Clinkering and early age hydration10.1016/j.cemconres.2009.11.003 ↗
53. Potential application of Portland cement-sulfoaluminate cement system in precast concrete cured under ambient temperature10.1016/j.conbuildmat.2020.118869 ↗
54. Hydration of calcium aluminates and calcium sulfoaluminate studied by Raman spectroscopy10.1016/j.cemconres.2013.01.015 ↗
55. Assessment of the thermal and microstructural properties of metakaolin-air lime based materials at an early age10.1016/j.clay.2020.105619 ↗
56. Utilization and performance evaluation of molasses as a retarder and plasticizer for calcium sulfoaluminate cement-based mortar10.1016/j.conbuildmat.2020.118201 ↗
57. Optimization of f-MgO/f-CaO phase in ladle furnace slag by air rapidly cooling10.1016/j.matlet.2020.128528 ↗
58. Further insights into calcium sulfoaluminate cement expansion10.1680/jadcr.18.00124 ↗