journal article·2021-12

Effects of fiber length and content on the performance of ultra-thin wearing course modified by basalt fibers

Keke Lou, Peng Xiao, Bangwei Wu, Aihong Kang, Xing Wu, Qianchao Shen

Publisher page

Abstract

Abstract Ultra-thin wearing course (UTWC) is a kind of functional layer widely used in road maintenance and construction, which is beneficial to prolong its service life. However, the performance of UTWC is frequently insufficient, especially cracking and raveling resistance. To investigate the effects of basalt fiber (BF) length and content on the performance of UTWC, basalt fibers with varied lengths (3 mm, 6 mm) and contents (0.2%, 0.3%, 0.4% and 0.5%) were selected. The macro-performance of UTWC were evaluated by wheel tracking test, uniaxial penetration test (UPT), low temperature bending beam test, semi-circle bending test (SCB), immersion stability test, Cantabro test and skid resistance test, besides scanning electron microscope (SEM) and fiber extraction test were employed to analyze the reinforcement mechanism and dispersion properties of basalt fibers. The results showed that compared with the neat one, the comprehensive performance of UTWC modified by basalt fibers was improved greatly, especially cracking and raveling resistance, which is influenced by fiber length and content. Fibers could form a three-dimensional network in the mixture, which is able to improve the integrity of the mixture and suppress the development of cracks effectively. However, the large contents and long lengths had negative effects on the fiber dispersion. Furthermore, based on the grey target theory, 3 mm basalt fiber is more suitable for AC-10, while 6 mm basalt fiber is more suitable for SMA-10. The optimum content of basalt fiber for AC-10 and SMA-10 is 0.2% and 0.3%, respectively. These findings provide a significant guidance for the application and promotion of UTWC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Tribology and Wear Analysis · Railway Engineering and Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Asphalt mixtures modified with basalt fibres for surface courses10.1016/j.conbuildmat.2018.03.058 ↗
2. Investigation of the impact of deicer materials on thermodynamic parameters and its relationship with moisture susceptibility in modified asphalt mixtures by carbon nanotube10.1007/s13369-020-05000-9 ↗
3. Investigation of Moisture Sensitivity and Conductivity Properties of Inductive Asphalt Mixtures Containing Steel Wool Fiber
4. Investigation of the effect of crumb rubber powder and warm additives on moisture resistance of SMA mixtures
5. Comprehensive study about effect of basalt fiber, gradation, nominal maximum aggregate size and asphalt on the anti-cracking ability of asphalt mixtures
6. Performance evaluation and adaptability optimization of hot mix asphalt reinforced by mixed lengths basalt fibers10.1016/j.conbuildmat.2021.123373 ↗
7. Improving the moisture sensitivity of asphalt mixtures by simultaneous modification of asphalt binder and aggregates with carbon nanofiber and carbon nanotube
8. The effect of aggregate-forming minerals on thermodynamic parameters using surface free energy concept and its relationship with the moisture susceptibility of asphalt mixtures
9. Evaluation of the benefits of open graded friction course: case study10.1016/j.conbuildmat.2018.08.185 ↗
10. Asphalt wearing course optimization for road traffic noise reduction10.1016/j.conbuildmat.2017.06.130 ↗
11. Research on performance of a dense graded ultra-thin wearing course mixture
12. Analysis interlayer shear stress of ultra-thin wearing course considering temperature and different interlayer contact conditions10.4028/www.scientific.net/AMM.505-506.102 ↗
13. Investigation on performances and nano-adhesion behavior of ultra-thin wearing course using polyurethane as binder10.1016/j.conbuildmat.2021.122349 ↗
14. Design and evaluation of ultra-thin friction courses asphalt mixture modified by polyolefin10.4028/www.scientific.net/AMR.723.41 ↗
15. H. Yaacob, F. Chang, R. Jaya, et al., Assessing the bond strength of hot mix asphalt pavement for wearing and binder courses, Int. J. Technol., 9 (5) (2018) 925–935. 10.14716/ijtech.v9i5.2193.10.14716/ijtech.v9i5.2193 ↗
16. The effect of time on acoustic durability of low noise pavements–the case studies in Poland10.1016/j.trd.2016.02.006 ↗
17. Influence of interface characteristics on the shear performance between open-graded friction course and underlying layer10.1061/(ASCE)MT.1943-5533.0001907 ↗
18. Laboratory investigation of OGFC-5 porous asphalt ultra-thin wearing course10.1016/j.conbuildmat.2019.04.205 ↗
19. Crumb rubber asphalt mixtures: a literature review10.1016/j.conbuildmat.2020.118577 ↗
20. Optimization of preparation procedure of liquid warm mix additive modified asphalt rubber10.1016/j.jclepro.2016.09.043 ↗
21. Characteristics of desulfurized rubber asphalt and mixture10.1007/s12205-015-1195-1 ↗
22. Performance evaluation of desulfurized rubber asphalt based on rheological and environmental effects10.1061/(ASCE)MT.1943-5533.0002971 ↗
23. The synergistic effect of organic montmorillonite and thermoplastic polyurethane on properties of asphalt binder10.1016/j.conbuildmat.2019.116867 ↗
24. Laboratory evaluation on performance of porous polyurethane mixtures and OGFC10.1016/j.conbuildmat.2018.02.145 ↗
25. Green tunnel pavement: polyurethane ultra-thin friction course and its performance characterization10.1016/j.jclepro.2020.125131 ↗
26. Laboratory investigation on the properties of polyurethane/unsaturated polyester resin modified bituminous mixture10.1016/j.conbuildmat.2020.119865 ↗
27. Performance enhancement of porous asphalt pavement using red mud as alternative filler10.1016/j.conbuildmat.2017.11.105 ↗
28. The influence of natural and synthetic fibers on low temperature mixed mode I + II fracture behavior of warm mix asphalt (WMA) materials10.1016/j.engfracmech.2017.06.003 ↗
29. Short- and long-term properties of glass fiber reinforced asphalt mixtures10.1080/10298436.2019.1577421 ↗
30. Laboratory assessment of hybrid fiber and nano-silica on reinforced porous asphalt mixtures10.1016/j.conbuildmat.2017.03.184 ↗
31. Laboratory evaluation of rutting and moisture damage resistance of glass fiber modified warm mix asphalt incorporating high RAP proportion10.1016/j.conbuildmat.2016.12.168 ↗
32. Laboratory investigations on fracture toughness of asphalt concretes reinforced with carbon and kenaf fibers10.1016/j.engfracmech.2020.106875 ↗
33. Effects of basalt fiber coated with different sizing agents on performance and microstructures of asphalt mixture10.1016/j.conbuildmat.2020.121155 ↗
34. Effect of basalt fiber on the low-temperature performance of an asphalt mixture in a heavily frozen area10.1016/j.conbuildmat.2020.119080 ↗
35. Suitability of fiber lengths for hot mix asphalt with different nominal maximum aggregate size: a pilot experimental investigation10.3390/ma13173685 ↗
36. Xiao · 2019
37. Xiao · 2019
38. Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering. JTG E20-2011, Occupation Standard of the People’s Republic of China.
39. Specifications for Design of Highway Asphalt Pavement. Occupation Standard of the People’s Republic of China 2017, JTG D520.
40. Uniaxial penetration testing for shear resistance of hot-mix asphalt mixtures10.1177/0361198106197000112 ↗
41. Experimental research on shear fatigue characteristics of asphalt mixture based on repeated uniaxial penetrating test10.1080/14680629.2014.1000944 ↗
42. Experimental investigation and multi-objective optimization of fracture properties of asphalt mixtures containing nano-calcium carbonate10.1016/j.conbuildmat.2021.122876 ↗
43. Investigation of the performance of basalt fiber reinforced asphalt mixture