journal article·2021-12

Lightweight expanded clay aggregate properties based on laboratory testing

Elías Roces, Mauro Muñiz-Menéndez, Jesús González-Galindo, José Estaire

Publisher page

Abstract

Abstract Lightweight expanded clay aggregate (LECA) is a manufactured aggregate with many uses in construction, such as aggregate for the lightweight concrete or like geotechnical fill. The properties of the material may vary depending on the manufacturer or the applications envisaged for the aggregate. This paper makes an analysis of some properties of the LECA 10/20 (grain size between 10 and 20 mm) manufactured in Portugal by Arlita. The weight density of the grain and the aggregate, water absorption, deformability or resistance to shear are studied based on an extensive set of tests carried out in the Laboratorio de Geotecnia of CEDEX in Madrid (Spain). Among other tests, the dimension and dry weight density of more than 1500 grains has been determined. Direct shear tests of 300 mm were made, 6″ triaxial tests, confined compression tests or water absorption tests over time (keeping samples submerged for more than 18 months) were carried out. Throughout the article, a comparison is made between the results obtained and other results available in the scientific literature. The results obtained from this set of tests are directly applicable to the design of LECA fillings. And a novel model is presented that allows estimating the water absorption of LECA grains over time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. L. Caldeira E.M.d. Neves, P. Saraiva, Reporte, LNEC – Proc. 501/19/18038, Laboratório Nacional de Engenharia Civil (LNEC); Instituto Superior Tecnico (IST) 2012 Lisboa, Portugal.
2. Lehners · 2004
3. EXCA, Expanded clay LWA in CEA, Lightweight fill and thermal insulation products for civil engineering applications Installation and structural quality control on site 2015.
4. Arlita, Guía técnica. 2ª Edición. (2017).
5. Ministerio de Fomento, EHE-08 (Instrucción del Hormigón Estructural) Madrid, Ministerio de Fomento, Secretaría General Técnica. (2008).
6. Lightweight expanded clay aggregate as a building material–An overview10.1016/j.conbuildmat.2018.03.009 ↗
7. Strength variations in lightweight concrete beams10.1016/0958-9465(94)90030-2 ↗
8. Strength properties of lightweight concrete made with LECA grading10.7158/C10-668.2012.10.1 ↗
9. Basic properties of structural LWAC based on waste and recycled materials10.1061/(ASCE)MT.1943-5533.0001696 ↗
10. A comparison study of the fresh and hardened properties of normal weight and lightweight aggregate concretes10.1016/j.jobe.2017.11.025 ↗
11. High-strength lightweight concrete using leca, silica fume, and limestone10.1007/s13369-012-0285-3 ↗
12. An investigation of the flexural behaviour of reinforced lightweight concrete beams
13. Self-compacting lightweight concrete produced with expanded clay aggregate10.1016/j.conbuildmat.2012.04.111 ↗
14. Influence of content and maximum size of light expanded clay aggregate on the fresh, strength, and durability properties of self-compacting lightweight concrete reinforced with micro steel fibers10.1016/j.conbuildmat.2019.117922 ↗
15. The effect of polypropylene fibers on the properties of fresh and hardened lightweight self-compacting concrete10.1016/j.conbuildmat.2010.06.018 ↗
16. Mechanical properties and load deflection relationship of polypropylene fiber reinforced self-compacting lightweight concrete10.1016/j.conbuildmat.2020.119084 ↗
17. Effect of the curing type on the mechanical properties of lightweight concrete with polypropylene and steel fibres10.1016/j.conbuildmat.2019.08.006 ↗
18. An experimental investigation of the mechanical performance and structural application of LECA-Rubcrete10.1016/j.conbuildmat.2018.04.184 ↗
19. Experimental research on the performance of lightweight concrete containing foam and expanded clay aggregate10.1016/j.compositesb.2019.04.025 ↗
20. Contribution of structural lightweight aggregate concrete to the reduction of thermal bridging effect in buildings10.1016/j.conbuildmat.2016.06.018 ↗
21. An overview on the effect of internal curing on shrinkage of high performance cement-based materials10.1016/j.conbuildmat.2017.04.154 ↗
22. Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates10.1016/S0008-8846(01)00608-1 ↗
23. An investigation on the use of zeolite aggregates for internal curing of concrete10.1016/j.conbuildmat.2012.10.009 ↗
24. Early-age tensile creep and cracking potential of concrete internally cured with pre-wetted lightweight aggregate10.1016/j.conbuildmat.2016.12.187 ↗
25. Examining soaking duration of coarse clay and shale lightweight aggregates for internal curing in conventional concrete10.1016/j.conbuildmat.2020.118754 ↗
26. Applicazioni Geotecniche E Caratterizzazione Meccanica Dell'Argilla Espansa Leca
27. E.M. Høva, A.S. Gylland, Documentation of material properties for Leca aggregates, (2009).
28. P. Almeida, Influência Da Humidade Relativa no Comportamento Mecânico Da Leca, Dissertação para obtenção do Grau de Mestre em Engenharia Civil, IST Lisboa, Portugal, 2009.
29. Y. Zhang, Comportement mécanique du matériau granulaire en tenant compte de la rupture des particules, (2018).
30. Experimental study on grain failure of lightweight expanded clay aggregate under uniaxial and biaxial load conditions10.1016/j.powtec.2021.01.052 ↗
31. The relation between particle density and static elastic moduli of lightweight expanded clay aggregates10.1016/j.clay.2014.02.017 ↗
32. Inverse engineering approach to determine the elastic properties of lightweight expanded clay10.1016/j.conbuildmat.2019.04.264 ↗
33. Particle shape effects on packing density, stiffness, and strength: natural and crushed sands10.1061/(ASCE)1090-0241(2006)132:5(591) ↗
34. Measurement and geological significance of shape and roundness of sedimentary particles10.1306/D42690F3-2B26-11D7-8648000102C1865D ↗
35. de Santiago Buey · 2008 · 95
36. A review on the angle of repose of granular materials10.1016/j.powtec.2018.02.003 ↗
37. Breakage mechanics—part I: theory10.1016/j.jmps.2006.11.003 ↗
38. Effect of confining pressure on the degradation of ballast under cyclic loading10.1680/geot.2005.55.4.325 ↗
39. Indraratna · 2011
40. Microstructural analysis of Iberian expanded clay aggregates10.1017/S1431927612000487 ↗
41. Breakage of an artificial crushable material under loading10.1007/s10035-013-0432-x ↗
42. Mechanical properties of light expanded clay aggregated (LECA) filled tubes10.1016/j.matlet.2018.01.078 ↗
43. Mechanical properties of lightweight aggregates10.1016/j.jeurceramsoc.2013.05.013 ↗
44. J.A. Jiménez Salas, de Justo Alpañes, José L, Geotecnia Y Cimientos: Propiedades De Los Suelos Y De Las Rocas, Rueda, 1975.
45. Mechanical characterization of lightweight expanded clay aggregate materials for modeling their geotechnical behavior10.1061/(ASCE)MT.1943-5533.0001286 ↗
46. Mavko · 2020
47. Test methods adapted for alternative and recycled, porous aggregate materials. Part 3-Water absorption
48. Hyperbolic method for consolidation analysis10.1061/(ASCE)0733-9410(1991)117:11(1723) ↗
49. A. Soriano Peña, F. Sánchez Caro, Deformaciones en presas de materiales sueltos, VI Jornadas Españolas de presas, Sevilla. (1999).
50. Estimation of water absorbed by expanding clay aggregates during structural lightweight concrete production10.1617/s11527-012-9857-7 ↗
51. Moisture Dynamics in lightweight aggregate and concrete
52. Storbråten · 2012
53. J. Estaire, M. Santana, Large direct shear tests performed with fresh ballast, in: Stark, Timothy D.: Swan Jr., Robert H., R. Szecsy (Eds.), Railroad Ballast Testing and Properties, ASTM International, 2018, pp. 144-161.10.1520/STP160520170137 ↗
54. Lade · 2016
55. Prediction of the structural behavior of rockfill dams
56. Luis Ortuño Abad, LECA shear angle, Personal comunication. (Nov, 11. 20).
57. Das · 2019
58. Terzaghi · 1996
59. J.C. Santamarina, G. Cho, Soil behaviour: The role of particle shape, (2004) 604-617.10.1680/aigev1.32644.0035 ↗
60. Effect of elevated temperatures on mechanical properties of lightweight geopolymer concrete
61. Durability characteristics of concrete mixture based on red ceramic waste aggregate10.3390/su12218890 ↗
62. Recycling of industrial and agricultural wastes as alternative coarse aggregates: A step towards cleaner production of concrete10.1016/j.conbuildmat.2021.123056 ↗