journal article·2022-07Open access

Effect of superabsorbent polymer introduction on properties of alkali-activated slag mortar

Zhengxian Yang, Peng Shi, Yong Zhang, Zhenming Li

Abstract

Internal curing by superabsorbent polymer (SAP) has been applied in alkali-activated slag (AAS) systems by a few previous studies with the purpose to mitigate the autogenous shrinkage. However, the effects of SAP on other properties of AAS have been rarely studied. In this paper, the workability, strength, permeability, and frost resistance of AAS mortar with synthesized SAP are investigated besides the autogenous shrinkage. Two SAP introducing ways (dry mixing and wet mixing) are considered. It is found that the flowability of AAS mortar decreases with the increase of SAP dosage regardless of the introducing way. The strength and permeability increase with the SAP dosage when it is below a certain amount depending on the mixing way. The autogenous shrinkage can be mitigated significantly by the incorporation of SAP and the mitigating effect is more pronounced by wet mixing. The frost resistance becomes better when more SAP is introduced in either way. The mechanisms behind these phenomena are explained based on the characterization results on the reaction kinetics, reaction products and pore structure of the mixtures with SAP.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. Mechanical properties of geopolymer concrete with fly ash and GGBS as source materials10.15680/IJIRSET.2014.0309023 ↗
2. Alkali-silica reaction in waterglass-activated slag mortars incorporating fly ash and metakaolin10.1016/j.cemconres.2018.03.002 ↗
3. Development of greener alkali-activated cement: utilisation of sodium carbonate for activating slag and fly ash mixtures10.1016/j.jclepro.2015.12.010 ↗
4. New cements for the 21st century: The pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
5. Cement and carbon emissions10.1617/s11527-013-0114-5 ↗
6. Perforated cenospheres: A reactive internal curing agent for alkali activated slagmortars10.1016/j.cemconcomp.2019.103351 ↗
7. Geopolymer concrete: A review of some recent developments10.1016/j.conbuildmat.2015.03.036 ↗
8. Sodium silicate-based, alkali-activated slag mortars: Part I. Strength, hydration and microstructure10.1016/S0008-8846(02)00717-2 ↗
9. Hydration products of alkali activated slag cement10.1016/0008-8846(95)00045-E ↗
10. Setting, strength, and autogenous shrinkage of alkali-activated fly ash and slag pastes: effect of slag content10.3390/ma11112121 ↗
11. A comparative study on the mechanical properties, autogenous shrinkage and cracking proneness of alkali-activated concrete and ordinary Portland cement concrete10.1016/j.conbuildmat.2021.123418 ↗
12. Autogenous shrinkage of alkali activated slag mortars: Basic mechanisms and mitigation methods10.1016/j.cemconres.2018.04.004 ↗
13. Effect of supplementary materials on the autogenous shrinkage of cement paste10.3390/ma13153367 ↗
14. Shrinkage mechanisms and shrinkage-mitigating strategies of alkali-activated slag composites: A critical review10.1016/j.conbuildmat.2021.125993 ↗
15. An overview on the effect of internal curing on shrinkage of high performance cement-based materials10.1016/j.conbuildmat.2017.04.154 ↗
16. Influence of liquid-binder ratio on the performance of alkali-activated slag mortar with superabsorbent polymer10.1016/j.jobe.2021.103934 ↗
17. Superabsorbent polymers as internal curing agents in alkali activated slag mortars10.1016/j.conbuildmat.2017.10.121 ↗
18. Mitigating autogenous shrinkage by internal curing using superabsorbent polymers
19. Prevention of autogenous shrinkage in high-strength concrete by internal curing using wet lightweight aggregates10.1016/S0008-8846(01)00608-1 ↗
20. Use of recycled aggregates as internal curing agent for alkali-activated slag system10.1016/j.conbuildmat.2017.10.110 ↗
21. Experimental study on effect for internal curing of porous saturated aggregate on the crack resistance and strength of concrete
22. Mirzabagheri S, Derhamjani G, Maharati S, et al. Using Cuttlebone Powder to Produce Green Concrete. Journal of Applied Engineering Sciences, 2018, 8(21):25-28.10.2478/jaes-2018-0014 ↗
23. Internal curing of alkali-activated fly ash-slag pastes using superabsorbent polymer10.1016/j.cemconres.2018.11.018 ↗
24. Modeling of internal curing in maturing mortar10.1016/j.cemconres.2011.04.013 ↗
25. Mechtcherine · 2012
26. Influence of superabsorbent polymers on the surrounding cement paste10.1016/j.cemconres.2015.12.004 ↗
27. Effect of internal curing by superabsorbent polymers-Internal relative humidity and autogenous shrinkage of alkali-activated slag mortars10.1016/j.conbuildmat.2016.07.007 ↗
28. The influence of superabsorbent polymer on the properties of alkali-activated slag pastes10.1016/j.conbuildmat.2019.117525 ↗
29. Internal curing by superabsorbent polymers in alkali-activated slag10.1016/j.cemconres.2020.106123 ↗
30. Effect of superabsorbent polymers (SAPs) on rheological properties of fresh cement-based mortars - Development of yield stress and plastic viscosity over time10.1016/j.cemconres.2014.07.003 ↗
31. Sorption kinetics of superabsorbent polymers (SAPs) in fresh Portland cement-based pastes visualized and quantified by neutron radiography and correlated to the progress of cement hydration10.1016/j.cemconres.2015.05.001 ↗
32. The effects of superabsorbent polymers on the microstructure of cementitious materials studied by means of sorption experiments10.1016/j.cemconres.2015.06.013 ↗
33. Translucent self-healing cementitious materials using glass fibers and superabsorbent polymers10.1016/j.dibe.2020.100012 ↗
34. Relation between the molecular structure and the efficiency of superabsorbent polymers (SAP) as concrete admixture to mitigate autogenous shrinkage10.1016/j.cemconres.2012.03.011 ↗
35. Water-entrained cement-based materials: II. Experimental observations10.1016/S0008-8846(02)00737-8 ↗
36. Mehta P K. Concrete: microstructure, properties, and materials. Preticehall International, 2006, 13(4):499-499.10.1139/l86-075 ↗
37. Water saturated super-absorbent polymers used in high strength concrete
38. Mönnig S, Lura P. Super absorbent polymers (SAP)-An admixture to increase the durability of concrete. Advances in Construction Materials, 2007:351 -35.
39. Chloride migration in concrete with superabsorbent polymers10.1016/j.cemconcomp.2014.09.023 ↗
40. Effect of chlorides on reinforcing steel exposed to simulated concrete solutions10.5006/1.3280463 ↗
41. Absorption kinetics of superabsorbent polymers (SAP) in various cement-based solutions10.1016/j.cemconres.2017.03.009 ↗
42. Yao X L. Study on the effect of super absorbent polymer on shrinkage of alkali activated slag cement mortar. Chongqing University, 2017 (in Chinese).
43. ASTM C1437-01, Standard Test Method for Flow of Hydraulic Cement Mortar, West Conshohocken, PA, 2001.
44. GB / T 17671-1999, Method of testing cements-Determination of strength. Beijing: China Standard Press, 1999 (in Chinese).
45. ASTM C1698-09, Standard test methods for autogenous strain of cement paste and mortar, ASTM International, West Conshohocken, PA, 2014.
46. JGJ/T 70-2009, Standard for test method of basic properties of construction mortar. Beijing: China Construction Industry Press, 2009 (in Chinese).
47. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
48. Effect of superabsorbent polymers and expansive additives on the shrinkage of alkali-activated slag10.1016/j.cemconcomp.2021.104218 ↗
49. Autogenous deformation and RH-change in perspective10.1016/S0008-8846(01)00501-4 ↗
50. Modification of water absorption and pore structure of high-volume fly ash cement pastes by incorporating nanosilica10.1016/j.jobe.2020.101638 ↗
51. Cracking potential of alkali-activated slag and fly ash concrete subjected to restrained autogenous shrinkage10.1016/j.cemconcomp.2020.103767 ↗
52. A low-autogenous-shrinkage alkali-activated slag and fly ash concrete10.3390/app10176092 ↗
53. Mechanisms of autogenous shrinkage of alkali-activated slag and fly ash pastes10.1016/j.cemconres.2020.106107 ↗
54. Internal curing of alkali-activated slag-fly ash paste with superabsorbent polymers10.1016/j.conbuildmat.2020.120985 ↗
55. Influence of activator type on hydration kinetics, hydrate assemblage and microstructural development of alkali activated blast-furnace slags10.1016/j.cemconres.2010.11.016 ↗
56. Effect of superabsorbent polymers (SAP) on the freeze-thaw resistance of concrete: results of a RILEM interlaboratory study10.1617/s11527-016-0868-7 ↗
57. Mitigation of autogenous shrinkage in alkali activated slag mortars by internal curing10.1617/s11527-012-9978-z ↗
58. Investigation of effects of reactive MgO on autogenous and drying shrinkage of near-neutral salt activated slag cement10.1016/j.ceramint.2021.11.096 ↗
59. Effect of fly ash microsphere on the rheology and microstructure of alkali-activated fly ash/slag pastes10.1016/j.cemconres.2018.04.008 ↗
60. Setting behaviours and early-age microstructures of alkali-activated ground granulated blast furnace slag (GGBS) from different regions in China10.1016/j.cemconcomp.2020.103782 ↗
61. Danielson U H. Heat of hydration of cement as affected by water-cement ratio. Proceedings of the 4th international Symposium on the Chemistry of Cement, Washington DC, U. S., Paper Ⅳ-S7, 1962:519-526.
62. Very early-age reaction kinetics and microstructural development in alkali-activated slag10.1016/j.cemconcomp.2014.09.001 ↗