Flexural strengths and fibre efficiency of steel-fibre-reinforced, roller-compacted, polymer modified concrete
Source abstract
Abstract
Abstract A new material suitable for the structural repair of concrete pavements has been developed at Coventry University exhibiting high flexural, shear and bond strengths and high resistance to reflection cracking, demonstrating also unique placeability and compactability properties. This article deals with the standard equivalent flexural strengths evaluated using the identical fibre bridging concept and the size effect. Correlation of flexural strengths for beams of different sizes was achieved and the efficiency of fibre in the mix was scrutinised. It was concluded that the efficiency was much higher in the new steel-fibre reinforced, roller compacted, polymer modified concrete (SFR–RC–PMC) mix than in conventional concrete. The high efficiency revealed by the fibre bridging law is mainly attributed to a lower water to cement ratio. It was also found that the fibre aspect ratio influences significantly the flexural performance of the new material. The very high flexural strength extracted from the SFR–RC–PMC, compared to conventional steel-fibre reinforced concrete is very favourable to worn concrete pavement rehabilitation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. A new mix design method for steel fibre-reinforced, roller compacted and polymer modified bonded concrete overlays10.1016/j.conbuildmat.2013.06.020 ↗
2. ASTM C 1170-06. Standard test method for determining consistency and density of roller-compacted concrete using a vibrating table, ASTM Committee C09; 2006, USA.
3. ACI Committee 207. Roller-Compacted Mass Concrete (ACI 207.5R-99), USA: ACI; 1999.
4. Crack propagation in fibre-reinforced concrete10.1061/(ASCE)0733-9445(1986)112:1(19) ↗
5. Fracture toughness of fibre reinforced concrete
6. Test method for flexural toughness characterization of fibre reinforced concrete: some concerns and a proposition
7. Concrete reinforced with deformed steel fibres. Part II: toughness characterization
8. Predicting the flexural post-cracking performance of steel fibre reinforced concrete from the pullout of single fibres
9. Flexural behaviour of steel fibre reinforced concrete10.1061/(ASCE)0899-1561(1998)10:2(86) ↗
10. Performance of toughness indices for steel fibre reinforced shotcrete10.1016/S0886-7798(01)00065-7 ↗
11. Discrete fracture in high performance fibre reinforced concrete materials10.1016/j.engfracmech.2011.04.008 ↗
12. Neocleous K, Angelakopoulos H, Pilakoutas K, Guadagnini M. Fibre-reinforced roller-compacted concrete transport pavements. In: Proceedings of the Institution of Civil Engineers, UK, Transport 164, May 2011 Issue TR2, 97–109.10.1680/tran.9.00043 ↗
13. Design issues for concrete reinforced with steel fibres, including fibres recovered from used tires10.1061/(ASCE)0899-1561(2006)18:5(677) ↗
14. Kagaya M, Suzuki T, Kokubun S, Tokuda H. A study on mix proportions and properties of steel fibre reinforced roller-compacted concrete for pavements, (Translation from Proceedings of JSCE, No. 669/V-50, February 2001); 2001.10.2208/jscej.2001.669_253 ↗
15. British Standard BS EN14651:2005+A1. Test method for metallic fibre concrete – measuring the flexural tensile strength (limit of proportionality (LOP), residual), British Standard Institution, UK; 2007.
16. ASTM C 1609/C 1609M-06 Standard Test Method for Flexural Performance of Fibre-Reinforced Concrete (Using Beam with Three-Point Loading). USA: ASTM International; 2006.
17. Strain energy release rate at interface of concrete overlay pavements
18. Simplified method for concrete pavement design with discrete structural fibres10.1016/j.conbuildmat.2006.08.008 ↗
19. Weibull strength scaling for standardized rectangular flexure specimens10.1111/j.1151-2916.2003.tb03329.x ↗
20. Size effect in blunt fracture: concrete, rock, metal
21. Bazant ZP. Fracture energy of heterogeneous materials and similitude in Fracture of Concrete and Rock. In: Shah SP, Swartz SE, editors. New York: Springer-Verlag; 1989, p. 229–241.10.1007/978-1-4612-3578-1_23 ↗
22. Japan Society of Civil Engineers JSCE-SF4. Methods of tests for flexural strength and flexural toughness of steel fibre reinforced concrete, Concrete Library International, Part III-2, No. 3; 1984, p. 58–61.
23. Lin Y. Optimum design for sustainable ‘Green’ bonded concrete overlays: controlling flexural failure [PhD Thesis]. UK: Department of Civil Engineering, Architecture and Building, Faculty of Engineering and Computing, Coventry University; 2014. [unpublished].
24. Use of small beams to obtain design parameters of fibre reinforced concrete10.1016/j.cemconcomp.2007.10.004 ↗
25. RILEM, Committee on Fracture mechanics of concrete. Test methods: determination of the fracture energy of mortar and concrete by means of three-point bend test on notched beams, Mater Struct 1985;10(106):285–290.
26. RILEM, Fracture mechanics test method for concrete, Report 5, 89-FMT. In: Shah SP, Carpinteri A, editors; 1991.
27. ACI Committee 544.2R-89, Reapproved in 2009, Measurement of properties of fibre-reinforced concrete; 1988.
28. On establishing the fibre bridging law by an inverse analysis approach