Influence of clay in limestone fillers for self-compacting cement based composites
Source abstract
Abstract
Abstract High workability together with a good resistance to segregation is needed for cement based composites, specifically fresh self-compacting mortars (SCM); in this prospect, the amount of coarse materials has to be reduced and replaced by fine material. Several limestone fillers are here compared and analysed. These by-products are issued from different industrial sectors, such as the aggregate and lime production industry (quarrying operations) and the ornamental stones industry (sawing operations). Particular attention has been paid to clay content, as consistency of fresh mortars was varying, while other physical characteristics like granulometry remained the same. Relationship between the physico-chemical properties of the fillers and the properties of fresh and hardened mortars are brought forward. Even if it may affect fresh properties of mortars, results clearly show that clay type and content has minor influence than limestone filler itself.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. The use of quarry dust for SCC applications
2. Ghezal A, Khayat KH, Beaupré D. Development of self-consolidating concrete with low binder content and mineral additives. In: Shah SP, editor. First North American conference on the design and use of self-consolidating concrete. Chicago (USA): Center for advanced cement-based materials, November 12–13, 2002. p. 77–83.
3. A study on the parameters affecting the properties of Portland limestone cement10.1016/S0958-9465(98)00031-6 ↗
4. Effect of use of mineral filler on the properties of concrete10.1016/S0008-8846(03)00015-2 ↗
5. Courard L, Degeimbre R, Darimont A, Michel F, Willem X, Flamant St. Some effects of limestone fillers as a partial substitute for cement in mortar composition. In: ConMat’05 third international conference on construction materials: performance, innovations and structural implications. Vancouver, Canada; 2005. p. 10 [Theme 3 – chapter 5].
6. Michel F, Piérard J, Courard L, Pollet V. Influence of physico-chemical characteristics of limestone fillers on fresh and hardened mortar performances. In: De Schutter G, Boel V, editors. 5th International RILEM symposium on self-compacting concrete, proceedings PRO 54. Gent (Belgium): Rilem Publications; 2007. p. 205–10.
7. The influence of mineral admixture on the rheology of cement paste and concrete10.1016/S0008-8846(00)00454-3 ↗
8. The effect of fine mineral admixtures on water requirement of cement pastes10.1016/S0008-8846(00)00380-X ↗
9. Flamant St, Courard L. Design of a self compacting repair mortar to be applied under concrete slabs and floors. In: 2nd RILEM symposium advances in concrete through science and engineering, Québec, Canada; 2006.10.1617/2351580028.090 ↗
10. Okamura H, Maekawa K, Ozawa K. High performance concrete, 1st ed.; 1993. 323p.
11. Boël V, De Schutter G. Freeze/thaw resistance of SCC in combination with deicing salts. In: De Schutter G, Boel V, editors. 5th International RILEM symposium on self-compacting concrete, proceedings PRO 54. Gent (Belgium): Rilem Publications; 2007. p. 817–22.
12. Agnastopoulos N, Georgiadis S, Sideris K. Carbonation of self compacting concretes produced with different materials. In: De Schutter, G, Boel V, editors. 5th International RILEM symposium on self-compacting concrete, proceedings PRO 54. G. Gent (Belgium): Rilem Publications; 2007. p. 721–8.
13. Characterization of limestone fillers from Wallonia
14. Michel F. Physical characterization of limestone fillers. Master thesis. FACULTE DES SCIENCES APPLIQUEES, UNIVERSITE DE LIEGE, BELGIUM; 2006. 125 p [in French].
15. Warland Ch. Influence of filler granulometry on water demand. Master thesis. Faculté des Sciences Appliquées, Université de Liège, Belgium; 2005. 102 p [in French].
16. Unikowski X, Zilmar R. Influence of clays on the properties of cementitious mortars. Research report LPC No. 110; 1982 [in French].
17. The effect of clay in sands used for cementitious materials in developing countries10.1016/j.cemconres.2006.10.016 ↗
18. EN 197-1. Cement. Composition, specifications and conformity criteria for low heat common cements; 2002.
19. EN 196-1. Method of testing cement – part 1: determination of strength; 1994.
20. EN 933-9. Tests for geometrical properties of aggregates – part 9: assessment of fines – methylene blue test; 1998.
21. NBN 589-207. Determination of organic matter in clays – H2O2 method; 1970 [Belgian standard].
22. EN 1015-3. Methods of test for mortars for masonry – part 3: determination of consistency of fresh mortar; 1999.
23. EN 480-2. Admixtures for concrete, mortars, grout – test method – part 2: determination of setting time; 1996.
24. NF P 18-508. Additions for hydraulic concretes – limestone fillers – specifications and conformity; 1995 [French standard].
25. Schmitz F. Effect of limestone fillers on resistance of concrete to carbonation. Master thesis. Faculté des Sciences Appliquées, Université de Liège, Belgium; 2007. 137 p [in French].
26. EN 13057. Products and systems for the protection and repair of concrete structures – test methods – determination of resistance of capillary absorption; 2002.
27. NBN B15-215. Tests on concrete: water absorption by immersion (Belgian standard); 1969.