journal article·2012-10

Comparison of asphalt rubber-aggregate and polymer modified asphalt–aggregate systems in terms of surface free energy and energy indices

Allex E. Alvarez, Evelyn Ovalles, Amy Epps Martin

Publisher page

Abstract

Abstract The surface free energy (SFE) is a material property that can be used to identify optimum asphalt–aggregate combinations (i.e., interfaces) for improved design of hot mix asphalt (HMA) and to characterize the HMA performance through the use of micromechanical models. Based on SFE measurements, and subsequent calculation of energy indices, this paper compares asphalt–aggregate interfaces formed with asphalt rubber (AR) and polymer modified (PM) asphalt binders (or asphalts) specified for fabrication of permeable friction course (PFC) mixtures in Texas. Six PM asphalts and four AR asphalts with five different aggregates were assessed. Corresponding results suggest that, in terms of the energy indices computed, the fracture resistance, moisture damage susceptibility, and the wettability of the asphalt over the aggregate of AR asphalt–aggregate systems can be comparable to that developed by PM asphalt–aggregate systems. However, this conclusion is restricted by the variability encountered for both asphalt groups analyzed (i.e., AR and PM). Additional research is recommended to analyze the effect of lime in PM asphalts (since PFC mixtures fabricated with PM asphalts often include lime) and the effect of mineral fillers on both PM- and AR-aggregate systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Kim · 2009
2. Bhasin A. Development of methods to quantify bitumen-aggregate adhesion and loss of adhesion due to water. Ph.D. dissertation. College Station, TX: Texas A&M University; 2006.
3. Bhasin A, Howson J, Masad E, Little DN, Lytton RL. Effect of modification processes on bond energy of asphalt binders. In: Transportation research board 86th annual meeting, Washington, DC; 2007. p. 1–14.10.3141/1998-04 ↗
4. Surface free energy to identify moisture sensitivity of materials for asphalt mixes10.3141/2001-05 ↗
5. Using the surface free energy method to evaluate the effects of polymeric aggregate treatment on moisture damage in hot-mix asphalt10.1061/(ASCE)MT.1943-5533.0000228 ↗
6. Assessment of the effect of mineral filler on asphalt–aggregate interfaces based on thermodynamic properties10.1016/j.conbuildmat.2011.08.089 ↗
7. Effect of Sasobit and Aspha-min on wettability and adhesion between asphalt binders and aggregates10.3141/2051-10 ↗
8. Beltrán DP, Caro S, Alvarez AE, Caicedo B. Empleo de un modelo mecánico de fractura para caracterizar la susceptibilidad al daño por humedad de mezclas asfálticas tibias. XVIII Simposio Colombiano sobre Ingeniería de Pavimentos-Escuela Colombiana de Ingeniería Julio Garavito, Cartagena; 2011.
9. A review of mix design and evaluation research for permeable friction course mixtures10.1016/j.conbuildmat.2010.09.038 ↗
10. Alvarez AE, Epps Martin A, Estakhri C, Button JW, Glover C, Jung SH. Synthesis of current practice on the design, construction, and maintenance of porous friction courses. Report no. FHWA/TX-06/0-5262-1. College Station, TX: Texas Transportation Institute—Texas A&M University; 2006.
11. Effect of asphalt film thickness on the moisture sensitivity characteristics of hot-mix asphalt10.1016/j.buildenv.2006.10.006 ↗
12. The effect of multiple freeze thaw cycle conditioning on the moisture damage in asphalt concrete mixture
13. TxDOT. Standard specifications for construction and maintenance of highways, streets, and bridges, Austin, TX; 2004.
14. A comparative study on properties of porous friction course mixes with neat bitumen and modified binders10.1016/j.conbuildmat.2008.08.008 ↗
15. Khalid H, Walsh CM, Pérez FE, Miró JR. Correlation of fundamental and empirical properties of porous asphalt binders. In: 3rd European symposium performance and durability of bituminous materials and hydraulic stabilised composites, Leeds; 1999. p. 3–16.
16. Research on material composition and performance of porous asphalt pavement10.1061/(ASCE)0899-1561(2009)21:4(135) ↗
17. Evaluation of durability tests for permeable friction course mixtures10.1080/10298430902730539 ↗
18. Comparison of permeable friction course mixtures fabricated using asphalt rubber and performance-grade asphalt binders10.1016/j.conbuildmat.2011.08.085 ↗
19. Lu Q, Harvey JT. Laboratory evaluation of open-graded asphalt mixes with small aggregates and various binders and additives. In: Transportation research board 90th annual meeting Transportation Research Board, Washington, DC; 2011. p. 1–18.10.3141/2209-08 ↗
20. Effect of crumb rubber modifiers on high temperature susceptibility of wearing course mixtures10.1016/j.conbuildmat.2006.05.020 ↗
21. Analysis of water and thermal sensitivity of open graded asphalt rubber mixtures10.1016/j.conbuildmat.2009.08.041 ↗
22. Adam · 1940
23. Bhasin A, Little DN, Vasconcelos KL, Masad E. Use of surface free energy to identify moisture sensitivity of materials for asphalt mixes. In: Transportation research board 86th annual meeting, Washington, DC; 2007. p. 1–15.10.3141/2001-05 ↗
24. Little D, Bhasin A. Using surface energy measurements to select materials for asphalt pavement. In: Contractor’s final report for NCHRP project 9–37; web-only document 104. Washington, DC: National Cooperative Highway Research Program; 2006.
25. Bitumen surface energy characterization using a contact angle approach10.1061/(ASCE)0899-1561(2006)18:6(759) ↗
26. Wasiuddin NM, Barraza HJ, Zaman MM, O’Rear EA. Assessment of surface free energy characteristics of performance graded asphalt binders. Geotech Special Publ GSP – ASCE, Adv Pavement Eng 2005;130.10.1061/40776(155)12 ↗
27. Determinación de la energía superficial libre de cementos asfálticos colombianos
28. Howson J, Masad E, Bhasin A, Castelo Branco V, Arambula E, Lytton RL, et al. System for the evaluation of moisture damage using fundamental material properties-implementation study. FHWA/TX-07/0-4524-1. College Station, TX: Texas Transportation Institute—Texas A&M University; 2007.
29. Characterization of aggregate surface energy using the universal sorption device10.1061/(ASCE)0899-1561(2007)19:8(634) ↗
30. Evaluación de la susceptibilidad al daño por humedad de mezclas asfálticas empleando propiedades termodinámicas
31. The application of grey system theory to correlate chemical composition and surface free energy of asphalt binders10.1080/10916460903226098 ↗
32. Transitioning from AASHTO T283 to the simple performance test using moisture conditioning10.1061/(ASCE)0899-1561(2009)21:2(73) ↗
33. TxDOT. 200-F, Bituminous test procedures manual, Austin, TX; 2011.
34. Limits on adhesive bond energy for improved resistance of hot mix asphalt to moisture damage10.1177/0361198106197000101 ↗