journal article·2014-09

Rheological behavior of bitumen mixed with Trinidad lake asphalt

Min-Chih Liao, Jian-Shiuh Chen, Gordon D. Airey, Shi-Jing Wang

Publisher page

Abstract

Abstract Trinidad lake asphalt (TLA) has been utilized as a modifier to blend with conventional petroleum bitumen for road and bridge applications where highly stable surfacings are required. The aim of this work was to evaluate the effect of TLA on rheological properties of Trinidad lake modified asphalt (TLMA). The critical content of TLA in the modified blend by weight was determined as the interaction of mineral particles occurred. Test results showed that TLA stiffened asphalts, but the degree of stiffening varied significantly with the TLA concentration levels. An increase in complex modulus (G*) and elastic response (δ) resulting from the introduction of TLA to asphalt binders had the potential benefit of improving resistance to rutting. In addition, zero shear viscosities (ZSVs) obtained from the Cross model were equal to the low shear viscosities (LSVs) at a frequency of 0.05 Hz, while the ZSVs from the Carreau model were close to the LSVs at 0.1 Hz. Steady state viscosities (SSVs), having the lowest values, approximately equaled the LSVs at 0.5 Hz. The concentration of TLA was recommended to be in the range of 20–33% by the weight of naturally modified asphalt according to the SSV stiffening effect.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Paul HR, Kemp SF. Laboratory evaluation of Trinidad lake asphalt. Research report no. 172. Louisiana: Louisiana Department of Transportation; 1985.
2. LaForce R. I-70 Glenwood Canyon overlay with Trinidad lake asphalt/steel slag hot mix asphalt. Final report, CDOT-DTD-R-2005-13. Denver, Colorado: Colorado Department of Transportation; 2006.
3. Russell M, Uhlmeyer JS, Anderson K, Weston J. Evaluation of Trinidad lake asphalt overlay performance. Experimental feature report, WA-RD 710.1. Olympia, Washington: Washington State Department of Transportation; 2008.
4. Performance of modified asphalt with Trinidad lake asphalt used as a waterproofing material for bridge deck pavement10.1520/JTE000355 ↗
5. American Society for Testing and Materials. Standard specification for Trinidad lake modified asphalt. ASTM D5710-05. PA: ASTM International; 2005.
6. Read · 2003
7. Characteristics of elastomeric and plastomeric binders in contact with natural asphalts10.1016/j.conbuildmat.2005.12.025 ↗
8. Fundamental characterization of engineering properties of Gussasphalt mixtures10.1061/(ASCE)MT.1943-5533.0000339 ↗
9. Philips MC, Robertus C. Rheological characterisation of bitumen binders in connection with permanent deformation in asphaltic pavement; the zero-shear viscosity concept. In: The rheology of bituminous binders Eurobitume workshop, no. 50, Brussels; 1995.
10. Philips MC. Robertus C. Binder rheology and asphaltic pavement permanent deformation; the zero-shear-viscosity. In: Euroasphalt & Eurobitume congress, no. 5134, Strasbourg; 1996.
11. Zero-shear viscosity of bituminous binder and its relation to bituminous mixture’s rutting resistance10.1177/0361198196153500103 ↗
12. Sybilski D. Zero-shear viscosity: phenomenon at measurement, interpretation and relation to permanent deformation. In: Euroasphalt & Eurobitume congress, no. 5142, Strasbourg; 1996.
13. Zero shear viscosity of asphalt binders10.3141/1810-07 ↗
14. Binard C, Anderson D, Lapalu L, Planche JP. Zero shear viscosity of modified and unmodified binders. In: 3rd Euroasphalt & Eurobitume congress, Vienna, Book II; 2004. p. 1721–33.
15. De Visscher J, Soenen H. Vanelstraete A. Redelius P. A comparison of the zero shear viscosity from oscillation tests and the repeated creep test. In: 3rd Eurasphalt & Eurobitume congress, Vienna, Book II; 2004. p. 1501–13.
16. Refinement of Superpave high-temperature binder specification based on pavement performance in the accelerated loading facility10.3141/1829-06 ↗
17. Carswell · 2000
18. Assessment of the pulsed creep test to predict the rutting performance of asphalt mixtures
19. Delgadillo R, Cho DW, Bahia H. Non linearity of repeated creep and recovery binder test and the relationship with mixture permanent deformation. In: Transportation research board annual meeting, Washington, DC; 2006 [CD ROM].10.1177/0361198106196200101 ↗
20. Desmazes C, Lecomte M, Lesueur D, Philips M. A protocol for reliable measurement of zero-shear-viscosity in order to evaluate the anti-rutting performance of binders. In: 2nd Eurasphalt & Eurobitume congress, Barcelona, Proc.0073, Book I; 2000. p. 203–11.
21. Vlachovicova Z, Zanzotto L, Stastna J. Creep and recovery in asphalt modified by radial SBS. In: Transportation research board annual meeting, Washington, DC; 2005 [CD ROM].
22. Method of predicting the properties of compound asphalts10.1007/s10553-006-0014-2 ↗
23. Rheology of non-Newtonian fluids: a new flow equation for pseudoplastic systems10.1016/0095-8522(65)90022-X ↗
24. A nonlinear viscoelastic model for polymer solutions and melts—II10.1016/0009-2509(68)80024-7 ↗
25. The influence of particle size and concentration of recycled tyre rubber on the rheological properties of Trinidad lake asphalt and petroleum bitumen
26. Effects of SBS and different natural asphalts on the properties of bituminous binders and mixtures10.1016/j.conbuildmat.2013.03.036 ↗