Specification development for cold in-situ recycling of asphalt
Source abstract
Abstract
Abstract In-situ cold recycling provides a valuable means to reduce the environmental impact of road construction. The reduced energy requirements relative to traditional hot mix recycling can lead to significant reductions in cost and associated CO2 emissions. Worldwide, in-situ cold recycling has been found to be particularly useful in the rehabilitation of rural roads where site locations are far from asphalt plants. However, practical issues remain due to the evolving nature of cold bituminous materials. Unlike hot-mix asphalts which gain strength quickly as they cool, cold-mix bituminous materials gain strength slowly over time. This is particularly an issue in countries with cooler, wetter climates, such as Ireland. Consequently the specification of cold materials poses a number of challenges relating to curing and testing protocols. This paper reports on the development of a specification for cold recycled materials and the application to a case study in Ireland. This work was conducted as part of the CEDR funded project CoRePaSol which focused on the development of harmonised design procedures for cold recycled mixes. In collaboration with the Irish National Roads Authority a 2.5 km site on a national road was identified for a recycling trial. The existing guidance for Low Energy Pavements was used to classify the road with respect to traffic levels and a testing programme was implemented which sought to reflect best practice across Europe. A series of recycling options were assessed and four different mix designs were proposed. These included variation in the binder type (foam mix or emulsion, with or without cement), binder content and recycling depth, reflecting the wide array of options available to engineers seeking to promote cold recycling. Due to the lack of harmonised guidelines across the Europe on design and evaluation of cold mixtures a specific focus is given in this paper to the mix evaluation procedure where alternative laboratory test specimen curing and testing procedures are investigated and recommendations are given.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Road traffic, vehicles and networks
2. European Union Road Federation (ERF) · 2012
3. Irish National Development Plan (INDP) · 2007
4. Irish National Development Plan (INDP) · 2000
5. National Roads Authority (NRA) · 2004
6. The influence of recycled asphalt pavement on the fatigue performance of asphalt concrete base courses10.1061/(ASCE)MT.1943-5533.0000093 ↗
7. National Roads Authority (NRA) · 2011
8. Road Recycling in Ireland
9. Cold in-situ recycling trial on the N15 National Primary Road, Sligo, Ireland
10. The laboratory design process for cold recycled asphalt pavement
11. J. Valentin, J. Suda, Z. Formanová, K. Mollenhauer, M. Engels, F, Batista, C. McNally, Introduction to European COREPASOL Project on Harmonizing Cold Recycling Pavement Techniques, in: Transport Research Arena 2014, 2014, Paris, France.
12. Recycled Asphalt (RA) for Pavements, in Handbook of Recycled Concrete and Demolition Waste
13. A Laboratory Study on Cold-Mix, Cold-Lay Emulsion Mixtures
14. Developing maturity methods for assessment of cold-mix bituminous materials
15. National Roads Authority (NRA), Interim Advice Note On Low Energy Pavements. 2011, National Roads Authority, Dublin, Ireland: Specifications for Road Works.
16. Wirtgen, Cold Recycling Technology. 2010.
17. T. Doyle, A. Gibney, C. McNally, A. Tabakovic, Developing Specific Conditions for Cold-mix Pavement Materials, in Transport Research Arena Europe 2010, 2010, Brussels, Belgium.
18. Effect of portland cement and lime additives on properties of cold in-place recycled mixtures with asphalt emulsion10.1016/j.conbuildmat.2008.07.020 ↗
19. Green bituminous asphalt relevant for highway and airfield pavements10.1016/j.conbuildmat.2011.12.065 ↗
20. A comparative study for improving the mechanical properties of cold bituminous emulsion mixtures with cement and waste materials10.1016/j.conbuildmat.2012.06.032 ↗
21. R. Choudhary, A. Mondal, H.S. Kaulgud, Use of Cold Mixtures for Rural Road Construction. in: International Conference on Emerging Frontiers in Technology for Rural Area (EFITRA). 2012. International Journal of Computer Applications.
22. D. Merrill, M. Nunn, I. Carswell, A Guide to the Use and Specification of Cold Recycled Materials for the Maintenance of Road Pavements. 2004.
23. Muthen · 1998
24. Portugal Road Administration (PRA), Specifications for Construction, CETO-EP, 2009.
25. Spanish Road Authority (SRA), General Specifications for Maintenance, PG-4 – Art.s 20 & 21, 2009.
26. Development of mix design procedure for cold in-place recycling with foamed asphalt10.1016/j.msea.2005.12.032 ↗
27. Leech, D., Cold Bituminous Materials for Use in the Structural Layers of Roads, 1994.