journal article·2016-01

Characterizing frost damages of concrete with flatbed scanner

Zhendi Wang, Qiang Zeng, Ling Wang, Kefei Li, Shilang Xu, Yan Yao

Publisher page

Abstract

Abstract Flatbed scanner is a low cost, fast, easy to operate, and efficient device for high quality digital image acquisition. The present study extended the applications of flatbed scanners from conventional air void counting to pore structure characterization of concrete affected by freezing–thawing (F–T) action. Imaging-analysis parameters (specific area and roundness of pores, density and length of cracks, and fractal dimension of pore outlines) were extracted from flatbed-scanned images, and conventional parameters (dynamic elastic modulus, mass and Cl − diffusion coefficient) were measured after every 25 F–T cycles. Both the imaging-analysis parameters and the conventional parameters varied with increasing F–T cycle. The successful use of a flatbed scanner to detect changes in concrete pore structure with frost damage in this research increases the expectation of its application to more aspects of concrete engineering.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Infrastructure Maintenance and Monitoring · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. The air requirement of frost-resistant concrete
2. Crystallization in pores10.1016/S0008-8846(99)00002-2 ↗
3. Modeling of the internal damage of saturated cement paste due to ice crystallization pressure during freezing10.1016/j.cemconcomp.2011.03.001 ↗
4. Numerical investigation of the effects of freezing on micro-internal damage and macro-mechanical properties of cement pastes10.1016/j.coldregions.2014.07.003 ↗
5. Analysis of damage development in cement paste due to ice nucleation at different temperatures10.1016/j.cemconcomp.2014.06.007 ↗
6. Elastic behavior of saturated porous materials under undrained freezing10.1007/s10409-013-0082-6 ↗
7. A study of freezing behaviour of cementitious materials by poromechanical approach10.1016/j.ijsolstr.2011.07.018 ↗
8. Freezing behavior of cement pastes saturated with NaCl solution10.1016/j.conbuildmat.2014.02.042 ↗
9. Freeze–thaw behavior of air entrained cement paste saturated with 10wt.% NaCl solution10.1016/j.coldregions.2014.02.003 ↗
10. Use of acoustic emission and X-ray computed tomography for damage evaluation of freeze–thawed concrete10.1016/j.conbuildmat.2010.05.005 ↗
11. Digital laminography assessment of the damage in concrete exposed to freezing temperatures10.1016/j.cemconres.2008.05.003 ↗
12. Characterizing blended cement pastes under freeze–thaw loading by electrical resistivity10.1016/j.conbuildmat.2013.02.042 ↗
13. Effect of moisture content on the electrical resistivity of cement pastes under freeze–thaw actions10.1007/s10853-014-8126-2 ↗
14. Electrical resistivity of cement pastes under cyclic freeze–thaw actions10.1061/(ASCE)MT.1943-5533.0001042 ↗
15. Evaluation of freeze–thaw damage in concrete by ultrasonic imaging10.1016/j.ndteint.2012.05.004 ↗
16. Monitoring of freeze–thaw cycles in concrete using embedded sensors and ultrasonic imaging10.3390/s140202280 ↗
17. High-resolution X-ray computed tomography in geosciences: a review of the current technology and applications10.1016/j.earscirev.2013.04.003 ↗
18. Laminate fibre structure characterisation of carbon fibre-reinforced polymers by X-ray scatter dark field imaging with a grating interferometer10.1016/j.ndteint.2013.04.012 ↗
19. Alite-ye’elimite cement: synthesis and mineralogical analysis10.1016/j.cemconres.2012.10.020 ↗
20. Quantification of the degree of reaction of fly ash10.1016/j.cemconres.2010.07.004 ↗
21. The influence of admixtures type on the air-voids parameters of non-air-entrained and air-entrained high performance SCC10.1016/j.conbuildmat.2012.11.086 ↗
22. Examining the possibility to estimate the influence of admixtures on pore structure of self-compacting concrete using the air void analyzer10.1016/j.conbuildmat.2012.11.100 ↗
23. Determination of air-void parameters of hardened cement-based materials using X-ray computed tomography10.1016/j.conbuildmat.2012.07.012 ↗
24. Automatic crack monitoring using photogrammetry and image processing10.1016/j.measurement.2012.07.019 ↗
25. Assessment of the potential alkali-reactivity of aggregates for concrete by image analysis petrography10.1016/j.cemconres.2012.08.009 ↗
26. Fractal-fracture analysis and characterization of impact-fractured surfaces in different types of concrete using digital image analysis and 3D nanomap laser profilometery10.1016/j.conbuildmat.2012.11.013 ↗
27. 3-dimensional reconstruction of size distribution of air voids in air-entrained concrete
28. Theoretical prediction on thickness distribution of cement paste among neighboring aggregates in concrete10.12989/cac.2011.8.2.163 ↗
29. The practical application of a flatbed scanner for air-void characterization of hardened concrete
30. Stromatoporoid biometrics using image analysis software: a first order approach10.1016/j.cageo.2009.09.010 ↗
31. Characterisation of archaeological mortars and plasters from Kyme (Turkey)10.1016/j.jas.2010.11.002 ↗
32. jPOR: an ImageJ macro to quantify total optical porosity from blue-stained thin sections10.1016/j.cageo.2011.03.002 ↗
33. Automated air void analysis of hardened concrete – a Round Robin study10.1016/j.cemconres.2006.03.005 ↗
34. Evaluation of two automated methods for air-void analysis of hardened concrete10.1520/JAI102476 ↗
35. ASTM C457–98, Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete, American Society for Testing and Materials, West Conshohocken, Pennsylvania, 2000.
36. Simple scanner-based image analysis for corrosion testing: concrete application10.1016/j.jmatprotec.2008.01.043 ↗
37. Estimation of the structure of air entrained concrete using a flatbed scanner10.1016/j.cemconres.2005.05.004 ↗
38. ASTM C150-00, Standard Specification for Portland Cement, American Society for Testing and Materials, West Conshohocken, PA, 2000.
39. JGJ 52-2006, Standard for Technical Requirements and Test Method of Sand and Crushed Stone (or Gravel) for Ordinary Concrete, China Architecture & Building Press, Beijing, 2006.
40. GB/T50080-2002, Standard for Test Method of Performance on Ordinary Concrete, China Architecture & Building Press, Beijing, 2002.
41. GB/T50081-2002, Standard for Test Method of Mechanical Properties on Ordinary Concrete, China Architecture & Building Press, Beijing, 2002.
42. Characterization of entrained air bubble systems in concrete by means of an image analyzing microscope10.1016/0008-8846(77)90070-9 ↗
43. ASTM C 666/C 666M, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing, American Society for Testing and Materials, Pennsylvania, USA, 2003.
44. Test methods of frost resistance of concrete: CIF-Test: capillary suction, internal damage and freeze thaw test- reference method and alternative methods A and B10.1007/BF02480521 ↗
45. GB/T 50082-2009, Standard for Test Methods of Long-term Performance and Durability of Ordinary Concrete, China Architecture & Building Press, Beijing, 2009.
46. ASTM C 672-98, Standard Test Method Scaling Resistance of Concrete Surfaces Exposed to De-icing Chemicals, American Society for Testing and Materials, Pennsylvania, USA, 2001.
47. JTJ275-2000, Corrosion Prevention Technical Specification for Concrete Structure of Marine Harbor Engineering, China Communications Press, 2001.
48. ASTM C 1202–97, Standard Test Method for Electrical Indication of Concrete’s Ability to Resist Chloride Ion Penetration, American Society for Testing and Materials, Pennsylvania, USA, 2001.
49. A threshold selection method from gray-level histograms10.1109/TSMC.1979.4310076 ↗
50. Methods for threshold optimization for images collected from contrast enhanced concrete surfaces for air-void system characterization10.1016/j.matchar.2008.10.005 ↗
51. Stochastic heterogeneity as fundamental basis for the design and evaluation of experiments10.1016/j.cemconcomp.2007.12.001 ↗
52. Numerical determination of representative volumes for granular materials10.1016/j.cma.2003.09.023 ↗
53. Frontiére du fractal de Rauzy et systéme de numération complexe10.4064/aa-95-3-195-224 ↗
54. Relative humidity and deterioration of concrete under freeze–thaw load10.1016/j.conbuildmat.2014.03.027 ↗
55. Effect of the curing conditions of concrete on the behaviour under freeze–thaw cycles10.1111/j.1460-2695.2010.01520.x ↗
56. Microscopic characterization of ice morphology in entrained air voids
57. Poromechanics of freezing materials10.1016/j.jmps.2005.04.001 ↗
58. Hydration properties of basic oxygen furnace steel slag10.1016/j.conbuildmat.2009.12.028 ↗
59. A comparison of early hydration properties of cement–steel slag binder and cement–limestone powder binder10.1007/s10973-013-3360-4 ↗
60. Hydration properties of steel slag under autoclaved condition10.1007/s10973-015-4397-3 ↗
61. Comparison of hydration properties between cement-GGBS-fly ash blended binder and cement-GGBS-steel slag blended binder10.1007/s11595-014-0907-6 ↗
62. Mandelbrot · 1983
63. Research on fractal characteristic of concrete fracture surface after freeze–thaw (in Chinese)
64. Surface fractal dimension: an indicator to characterize the microstructure of cement-based porous materials10.1016/j.apsusc.2013.05.123 ↗
65. Surface fractal analysis of pore structure of high-volume fly-ash cement pastes10.1016/j.apsusc.2010.07.061 ↗
66. Durability of ternary blend concrete with silica fume and blast-furnace slag: laboratory and outdoor exposure site studies
67. Micro-ice-lens formation in porous solid10.1006/jcis.2001.7828 ↗
68. Chloride ion diffusivity of fly-ash and silica fume concretes exposed to freeze–thaw cycles10.1016/j.conbuildmat.2010.02.015 ↗
69. Effect of fly ash and repeated loading on diffusion coefficient in chloride migration test10.1016/j.conbuildmat.2010.11.016 ↗
70. Experimental study of the material and bond properties of frost-damaged concrete10.1016/j.cemconres.2010.11.007 ↗
71. Image analysis for detecting aggregate gradation in asphalt mixture from planar images10.1016/j.conbuildmat.2011.08.007 ↗
72. Fractal methods and results in cellular morphology – dimensions, lacunarity and multifractals10.1016/S0165-0270(96)00080-5 ↗
73. Fractal analysis of effect of air void on freeze–thaw resistance of concrete10.1016/j.conbuildmat.2013.04.040 ↗