journal article·2016-10

Comparison of newly proposed test methods to evaluate the bonding quality of Cross-Laminated Timber (CLT) panels by means of experimental data and finite element (FE) analysis

Michele Betti, Michele Brunetti, Marco Pio Lauriola, Michela Nocetti, Francesco Ravalli, Benedetto Pizzo

Publisher page

Abstract

The effectiveness of new shear test methods for evaluating the face-bonding quality of Cross-Laminated Timber (CLT) panels was examined by comparing experimental data and numerical modelling. The common characteristic of the specimens was the loading with angle of 45° with respect to the wood grain, in order to avoid rolling shear during test. In addition, the sampling methodology along the panel was investigated, as well as the relation between shear and delamination tests, and the possibility of coupling them using the same specimen. The results demonstrated that all the proposed shear test methods were effective for evaluating the quality of bonding among layers in CLT panels; however, the practical applicability of the methods led to elect the most suitable for inclusion in technical standards. Shear and delamination results proved not to be correlated, and the results showed that the size of the specimen is a crucial factor in determining the outcomes of delamination tests. Therefore, while it is feasible to propose the coupling of accelerated aging procedures with shear tests, the size of the samples need to be higher than the one tested here.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Structural Analysis of Composite Materials · Masonry and Concrete Structural Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. H.J. Blass, P. Fellmoser, 2004. Design of solid wood panels with cross layers, in: Proceedings of the World Conference on Timber Engineering (WCTE), Lahti, Finland.
2. Gagnon · 2011
3. B. Yeh, S. Gagnon, T. Williamson, C. Pirvu, 2012. The cross-laminated timber standard in North America, in: Proceedings of the World Conference on Timber Engineering (WCTE), Auckland, New Zealand, pp. 31–40.
4. R. Brandner, 2013. Production and Technology of Cross Laminated Timber (CLT): A state-of-the-art Report. Focus Solid Timber Solutions – European Conference on Cross Laminated Timber (CLT). 21–22nd May 2013, Graz, Austria, vol. 1, pp. 3–39.
5. EN 16351:2015. Timber structures — Cross laminated timber — Requirements. European Committee for Standardization CEN, Bruxelles.
6. R. Brandner, G. Schickhofer, 2012. SSTC 1.1.2-5 clt_panel_pressdruck: Untersuchungen betreffend der Definition eines für die Produktion von Brettsperrholz optimalen Pressdruckes, in: Research Report, Institute of Timber Engineering and Wood Technology, Graz University of Technology, Competence Centre Holzbau Forschungs Gmbh, pp. 76.
7. Adhesively bonded connections in the context of timber engineering – a review
8. Shear strength and durability testing of adhesive bonds in cross-laminated timber
9. EN 14080:2013. Timber Structures – Glued Laminated Timber and Glued Solid Timber – Requirements. European Committee for Standardization CEN, Bruxelles.
10. EN 13353:2008+A1. Solid Wood Panels (SWP) – Requirements. European Committee for Standardization CEN, Bruxelles.
11. EN 13354:2008. Solid Wood Panels (SWP) – Bonding Quality – Test Method. European Committee for Standardization CEN, Bruxelles.
12. A shear test for structural adhesives used in the consolidation of old timber10.1007/s001070050486 ↗
13. Measuring the shear strength ratio of glued joints within the same specimen10.1007/s00107-003-0386-5 ↗
14. Delamination properties and shear strength of glued beech wood laminations with red heartwood10.1007/s00107-006-0135-7 ↗
15. Structural bonding of ash (Fraxinus excelsior L.): resistance to delamination and performance in shearing tests10.1007/s00107-014-0778-8 ↗
16. Factors affecting the strength of block-shear specimens
17. Qualification of wood adhesives for structural softwood glulam with large juvenile wood content10.1179/wsc.2008.18.1.24 ↗
18. Gluing of European beech wood for load bearing timber structures10.1007/s00107-009-0382-5 ↗
19. Quality control of glulam: shear testing of bondlines10.1007/s00107-010-0456-4 ↗
20. Integrity check of structural softwood glue lines: correspondence between delamination and block shear test10.1007/s00107-014-0838-0 ↗
21. Influence of wood properties and bonding parameters on bond durability of European Beech (Fagus sylvatica L.) glulams10.1051/forest/2010002 ↗
22. A delamination test for structural wood adhesives used in thick joints10.1007/s001070050487 ↗
23. EN 408:2010+A1:2012. Timber Structures. Structural Timber and Glued Laminated Timber. Determination of Some physical and Mechanical Properties. European Committee for Standardization CEN, Bruxelles.
24. EN 392: 1995. Glued Laminated Timber – Shear Test of Glue Lines. European Committee for Standardization CEN, Bruxelles.
25. EN 391:2001. Glued Laminated Timber – Delamination Test of Glue Lines. European Committee for Standardization CEN, Bruxelles.
26. A numerical study of the shear-strength-predicting capabilities of test specimens for wood–adhesive bonds10.1016/S0143-7496(03)00096-4 ↗
27. EN 314:2005. Plywood – Bonding Quality. European Committee for Standardization CEN, Bruxelles.
28. Überlegungen zur Entwicklung eines Probekörpers zur Prüfung der Verleimungsqualitätvon Dreischicht/Massivholzplatten, Teil 1
29. EN 338:2009. Structural Timber – Strength Classes. European Committee for Standardization CEN, Bruxelles.
30. ANSYS Inc. · 1992
31. A non-linear 3D FEM model to simulate timber–concrete joints10.1016/j.advengsoft.2006.08.024 ↗
32. Non-linear numerical analysis of plywood board timber connections by DOE-FEM and full-scale experimental validation10.1016/j.engstruct.2012.11.003 ↗
33. Hill · 1998
34. Experimental and numerical investigations on adhesively bonded hardwood joints10.1016/j.ijadhadh.2012.01.014 ↗
35. Giorndano · 2003 · 850
36. Nonlinear shear properties of spruce softwood: numerical analyses of experimental results10.1016/j.compscitech.2009.05.011 ↗
37. EN 14358:2007. Timber Structures – Calculation of Characteristic 5-Percentile Values and acceptance Criteria for a Sample. European Committee for Standardization CEN, Bruxelles.