journal article·2016-10Open access

Optimization of the road binder used in the base layer in the road construction

Marek Iwański, Przemysław Buczyński, Grzegorz Mazurek

Abstract

The research focused on the application of mixed binder system to the hydraulically bound mixes used in road base (HBM). This paper presents the outcome of the tests for the mechanical characteristics of the HBM road base in terms of the binder type used. Seven binders were prepared in a laboratory by blending three primary constituents: Portland cement CEM I 32,5R, fluidised bed combustion fly ash and cement kiln dust (CKD). The proportions were selected according to the experimental design. The percent amount of the binder in the hydraulically bound mixture was 6%. Two types of aggregate were used as the mineral material in the base. The composition of the mixtures was designed based on the Proctor method. The influence of the binders on the properties of the HBM road base was evaluated by determining the compressive strength at 7, 14, 28 and 42 days of curing, frost resistance and water absorption. The test results were used to optimise the binder composition with respect to the road base characteristics and to establish the recommended road binder composition.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Asphalt Pavement Performance Evaluation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. M. Iwański, G. Mazurek, Hydrated lime as the anti-aging bitumen agent. in: 11th International Conference on Modern Building Materials, Structure and Techniques (MBMST), Vilnus, Lithuania, vol. 57, 2013, pp. 424–432. .10.1016/j.proeng.2013.04.055 ↗
2. Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures10.1016/j.matdes.2016.01.094 ↗
3. Effects of copper slag and recycled concrete aggregate on the properties of CIR mixtures with bitumen emulsion, rice husk ash, Portland cement and fly ash10.1016/j.conbuildmat.2015.08.021 ↗
4. M. Iwański, A. Chomicz-Kowalska, The effects of using foamed bitumen and bitumen emulsion in the cold recycling technology. in: The 8th International Conference, Vilnius, Lithuania, 2011, pp. 1089–1096. .
5. P. Buczyński, M. Lech, The properties the hydraulically bound mixture in aspect of hydraulic road binder with one-, two- and three-component, in: Procedia Engineering, 37th Scientific-Technical Conference on Material Problems in Civil Engineering MATBUD’2015, vol. 108, 2015, pp.116–123. .10.1016/j.proeng.2015.06.126 ↗
6. W. Wons, M. Ciepiel, Poprawa nośności gruntów spoistych wieloskładnikowymi spoiwami wapiennymi (Improvement of coherent soils with multicomponent limestone binders), Magazyn Autostrady 5/2014. pp. 46–49 (in Polish).
7. Garber · 2011
8. M. Iwański, A. Chomicz-Kowalska, Laboratory study on mechanical parameters of foamed bitumen mixture in the cold recycling technology, in: 11th International Conference on Modern Building Materials, Structure and Techniques (MBMST), Vilnus, Lithuania, vol. 57, 2013, pp. 433–442. .10.1016/j.proeng.2013.04.056 ↗
9. M. Iwański, A. Chomicz-Kowalska, Evaluation of the effect of using foamed bitumen and bitumen emulsion in cold recycling technology, in 3rd International Conference on Transportation Infrastructure, Pisa, Italy, 2014, pp. 69–76. .
10. Performances of hydrated cement treated crushed rock base for Western Australian roads
11. Stabilization of an expansive over consolidated clay using hydraulic binders
12. Physical and mechanical properties of foamed Portland cement composite containing crumb rubber from worn tires10.1016/j.matdes.2014.03.021 ↗
13. Comparing the mechanical properties of cold recycled mixture containing coal waste additive and ordinary Portland cement
14. Physicochemical characterization of cement kiln dust for potential reuse in acidic wastewater treatment10.1016/j.jhazmat.2009.08.081 ↗
15. J. Deja, Ł. Gołek, Ł. Kołodziej, Application of glass cullet in binder production, Cement-Lime-Concrete, vol. 2011/6, 2011, pp. 349–354.10.32047/CWB.2011.16.6.5 ↗
16. M. Bożym, Alternatywne metody wykorzystania pyłów z pieców wapienniczych i cementowych, ze szczególnym uwzględnieniem gospodarki osadowej (Alternative methods for cement and lime kiln dust use with the focus of sewage sludge pretreatment). Instytut Ceramiki i Materiałów Budowlanych, Nr 8, 2011, pp. 59–68 (in Polish).
17. Optimization of tribological properties of cement kiln dust-filled brake pad using grey relation analysis10.1016/j.matdes.2015.10.045 ↗
18. J. Śliwiński, T. Tracz, J Deja, A. Łagosz, Wybrane właściwości betonów z dodatkiem frakcjonowanego popiołu lotnego krzemionkowego i popiołu fluidalnego (Selected properties of concrete with the addition of fractioned siliceous fly ash and fluidized bed combustion ash), Cement-Lime-Concrete. vol. 2013/2, 2013, pp. 81–90. (in Polish).
19. J. Judycki, P. Jaskuła, M. Pszczoła, J. Alenowicz, B. Dołżycki, M. Jaczewski, D. Ryś, M. Stienss, Katalog typowych konstrukcji nawierzchni podatnych i półsztywnych (Catalogue of typical flexible and semi-rigid pavement structures), Gdańsk 2012, Generalna Dyrekacja Dróg krajowych i Autostrad, 2012, pp. 1–117. (in Polish).
20. B Dołżycki. Spękania nawierzchni z podbudową z mieszanki MCE na przykładzie drogi krajowej nr 7 (Cracking of the road pavement constructed with the MCE base layer – national road no. 7), in: 4th International Conference: Modern Technologies in Highway Engineering, Poznań, 2009, pp. 83–93 (in Polish).
21. Wytyczne techniczne WT-5 2010. Mieszanki związane spoiwem hydraulicznym do dróg krajowych (Technical Guidelines WT-5 2010. Hydraulic binder bound mixtures for national roads). Generalna Dyrekcja Dróg Krajowych i Autostrad, Warszawa, 2010, pp. 1–99 (in Polish).
22. Atkinson · 1992
23. PN-EN 933-1:2012 – Tests for geometrical properties of aggregates. Determination of particle size distribution. Sieving method.
24. PN-EN 13286-50 – Unbound and hydraulically bound mixtures. Method for the manufacture of test specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction.
25. Simultaneous optimization of several response variables10.1080/00224065.1980.11980968 ↗
26. PN-EN 13286-41 – Unbound and hydraulically bound mixtures. Test method for determination of the compressive strength of hydraulically bound mixtures.
27. Montgomery · 2001
28. A. Szydło, P. Mackiewicz, R. Wardęga, B. Krawczyk, Katalog typowych nawierzchni sztywnych (Catalogue of typical rigid pavements), GDDKiA, 2014 (in Polish).
29. P. Buczyński. Właściwości recyklowanej podbudowy z asfaltem spienionym w aspekcie spoiw drogowych (The properties of the recycled base layer with foamed bitumen in terms of road binders). Drogownictwo, vol. 6, 2015, pp. 195–199.
30. Zivorad · 2004