Investigation on properties of geopolymer mortar using preheated materials and thermogenetic admixtures
Source abstract
Abstract
Abstract Heat curing in an oven is the traditional method to obtain mechanical properties of geopolymers. This characteristic has significantly affected operations in terms of construction and energy consumption. The target of this paper is proposing alternative curing methods namely self-cured technologies for fly ash based geopolymer materials that are cured in ambient conditions without use of a heat resource. Two alternative methods are to use three different mixing processes with preheated materials and to use two thermogenetic admixtures (hot pack material and quicklime). The results show that for the mixing processes, a larger amount of provided heat energy results in a higher compressive strength of the geopolymer mortar (GM). For the use of a thermogenetic admixture, the results from compressive strength testing, Scanning Electron Microscope (SEM), energy dispersive X-ray analysis (EDX) micrographs and X-ray diffraction (XRD) analysis confirm that quicklime is more efficient than hot pack material. In the case of using quicklime, the suggested amount is about 3–5% of fly ash by mass.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Building materials and conservation
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Climate Change and the Cement Industry
2. Global warming impact on the cement and aggregates industries
3. Acid resistance and curing properties for green fly ash-geopolymer concrete10.3130/jaabe.12.317 ↗
4. Introduction: sustainable development and concrete technology
5. V.M. Malhotra, Role of supplementary cementing materials and superplasticizers in reducing greenhouse gas emissions, in: Proceedings of ICFRC International Conference on Fiber Composites, High-Performance Concrete, and Smart Materials, India, 2004, pp. 489-499.
6. Theoretical and experimental study on mechanical properties and flexural strength of fly ash-geopolymer concrete10.1016/j.conbuildmat.2015.12.033 ↗
7. Influence of OPC replacement and manufacturing procedures on the properties of self-cured geopolymer10.1016/j.conbuildmat.2014.09.065 ↗
8. Davidovits · 1979 · 151
9. Davidovits · 2011
10. O.B. Raijiwala, H.S. Path, Geopolymer concrete: a green concrete, in: 2nd International Conference on Chemical, Biological and Environmental Engineering (ICBEE 2010), 2010, pp. 202–206.10.1109/ICBEE.2010.5649609 ↗
11. Carbon dioxide equivalent (CO2-e) emissions: a comparison between geopolymer and OPC cement concrete10.1016/j.conbuildmat.2013.01.023 ↗
12. Strength and setting times of low calcium fly ash-based geopolymer mortar10.5539/mas.v2n4p3 ↗
13. P. Nath, P.K. Sarker, Geopolymer concrete for ambient curing condition, in: The Australasian Structural Engineering Conference 2012 (ASEC 2012), Perth, Western Australia, 2012.
14. OPC-fly ash cementitious systems: study of gel binders produced during alkaline hydration10.1007/s10853-006-0585-7 ↗
15. High-strength geopolymer using fine high-calcium fly ash10.1061/(ASCE)MT.1943-5533.0000161 ↗
16. Bonding and abrasion resistance of geopolymeric repair material made with steel slag10.1016/j.cemconcomp.2007.04.004 ↗
17. .
18. .
19. .
20. ASTM C39/C 39M-99, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimen.
21. Nguyen · 2012
22. ASTM 618, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete.
23. The effect of temperature on the geopolymerization of a metakaolin-based geopolymer10.1016/j.matlet.2010.12.049 ↗