journal article·2017-02

Multi-walled carbon nanotube reinforced mortar-aggregate interfacial properties

Xiaobin Song, Susu Shang, Dandan Chen, Xianglin Gu

Publisher page

Abstract

Abstract This paper presents the test results of the mortar-aggregate interfacial strength properties considering six dosages of industrial grade pre-dispersed multi-walled carbon nanotube paste. Mechanical and ultrasonication dispersion were carried out and scanning electron microscope was taken for dispersion inspection. The test results indicated a stable yet negative effect of carbon nanotube paste on the mortar compression strength; while a widely scattered (coefficient of variation up to 23.6%) positive effect on the interfacial tensile strength (maximum 8.4% increase at 0.2 wt% carbon nanotube) was observed. It was also found that the increase of the interfacial shear strength was much more significant (maximum 51.5% at 0.05 wt% carbon nanotube) with a medium variation. Analysis of the mortar strength, interfacial tensile strength and shear strength showed no solid correlation amongst the three strength properties, which implies that the reinforcing mechanism of the carbon nanotube to the mortar-aggregate interface along various directions can be substantially different. The generated knowledge will be incorporated in a meso-scale analysis of carbon nanotube reinforced concrete, in which the aggregate, mortar and interface will be considered separately.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Carbon Nanotubes in Composites · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. Effect of carbon nanotubes on properties of cement mortars10.1016/j.conbuildmat.2013.09.019 ↗
2. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
3. Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix10.1016/j.cemconcomp.2012.07.008 ↗
4. Compressive strength and microstructure of carbon nanotubes-fly ash cement composites10.1016/j.msea.2009.09.039 ↗
5. Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials10.1016/j.apsusc.2010.09.030 ↗
6. Highly concentrated carbon nanotube admixture for nano-fibre reinforced cementitious materials10.1016/j.cemconcomp.2012.01.006 ↗
7. Hybrid effect of carbon nanotube and nanoclay on physico-mechanical properties of cement mortar10.1016/j.conbuildmat.2010.06.046 ↗
8. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes10.1016/j.carbon.2004.12.017 ↗
9. Preparation and microstructural properties study on cement composites reinforced with multi-walled carbon nanotubes10.1177/0021998313514873 ↗
10. Compressive strength, chloride permeability, and freeze-thaw resistance of MWNT concretes under different chemical treatments
11. Properties of normal-strength concrete and mortar with multi-walled carbon nanotubes10.1680/macr.12.00212 ↗
12. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
13. SEM/AFM studies of cementitious binder modified by MWCNT and nano-sized Fe needles10.1016/j.matchar.2008.11.001 ↗
14. Surface decoration of carbon nanotubes and mechanical properties of cement/carbon nanotube composites10.1680/adcr.2008.20.2.65 ↗
15. Dispersivity of multi-walled carbon nanotubes (MWCNT) and mechanical properties of MWCNT reinforced cement-based composite
16. Potential of carbon nanotube reinforced cement composites as concrete repair material10.1155/2016/1421959 ↗
17. The aggregate-mortar interface10.1016/0008-8846(85)90084-5 ↗
18. Micromechanical properties of cementitious composites10.1007/BF02479632 ↗
19. Micromechanical modeling of crack-aggregate interaction in concrete materials10.1016/S0958-9465(99)00016-5 ↗
20. Interfacial transition zone in cementitious materials10.1016/S0008-8846(00)00210-6 ↗
21. Influence of the roughness of aggregate surface on the interface bond strength10.1617/13658 ↗
22. Influence of aggregate surface roughness on mechanical properties of interface and concrete10.1016/j.conbuildmat.2014.04.131 ↗
23. Experimental study and application of mechanical properties for the interface between cobblestone aggregate and mortar in concrete10.1016/j.conbuildmat.2013.04.028 ↗
24. Toxicity studies of carbon nanotubes10.1007/978-0-387-76713-0_14 ↗
25. Jaeger · 1979
26. Standard for test method of performance on building mortar (JGJ/T70-2009), Ministry of Construction of China, Beijing, 2009.
27. Shear bond strength between coarse aggregate and cement paste or mortar