journal article·2017-07

Prediction model for relative humidity of early-age internally cured concrete with pre-wetted lightweight aggregates

Dejian Shen, Mingliang Wang, Ying Chen, Tao Wang, Jinyang Zhang

Publisher page

Abstract

Abstract The decrease of internal relative humidity (IRH) in high-performance concrete (HPC) induces autogenous shrinkage, which is fundamental to evaluate the cracking resistance. Internal curing (IC) with pre-wetted lightweight aggregates (LWAs) is used to mitigate the shrinkage of HPC, and prediction of shrinkage of HPC requires knowledge of the IRH variations. Although investigations on IRH in concrete have been conducted, the prediction model for IRH in internally cured concrete with LWAs considering IC remains lacking. Experimental research and analysis on IRH in early-age concrete with pre-wetted LWAs were conducted. Test results show that: (1) the average value of IRH decrease rate in internally cured concrete with pre-wetted LWAs decreased nonlinearly with the increase of IC water-to-cement (w/c) ratio; (2) the prediction models for critical time and working w/c ratio were proposed; (3) a prediction model for the IRH in early-age internally cured concrete was proposed considering the working w/c ratio, critical time, and age. These models showed the good accuracy of the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Influence of temperature on autogenous deformation and relative humidity change in hardening cement paste10.1016/S0008-8846(99)00021-6 ↗
2. Autogenous shrinkage in high-performance cement paste: an evaluation of basic mechanisms10.1016/S0008-8846(02)00890-6 ↗
3. Super absorbing polymers as an internal curing agent for mitigation of early-age cracking of high-performance concrete bridge decks10.1016/j.conbuildmat.2010.06.063 ↗
4. Interior relative humidity of normal- and high-strength concrete at early age10.1061/(ASCE)MT.1943-5533.0000441 ↗
5. Volume change and cracking in internally cured mixtures made with saturated lightweight aggregate under sealed and unsealed conditions10.1016/j.cemconcomp.2009.04.003 ↗
6. Effect of internal curing on durability-related properties of high performance concrete10.1016/j.cemconres.2011.07.012 ↗
7. State-of-the-art report on control of cracking in early age concrete10.3151/jact.2.141 ↗
8. Effect of internal curing on internal relative humidity and shrinkage of high strength concrete slabs10.1016/j.conbuildmat.2014.02.060 ↗
9. Integrative study on the effect of internal curing on autogenous and drying shrinkage of high-strength concrete10.1080/07373937.2012.745869 ↗
10. Early age microstructure of Portland cement mortar investigated by ultrasonic shear waves and numerical simulation10.1016/j.cemconres.2004.09.004 ↗
11. Prevention of autogenous shrinkage in high strength concrete by internal curing using wet lightweight aggregates10.1016/S0008-8846(01)00608-1 ↗
12. Release of internal curing water from lightweight aggregates in cement paste investigated by neutron and X-ray tomography10.1016/j.nima.2011.02.012 ↗
13. S. Weber, H.W. Reinhardt, Modeling the internal curing of high-strenght concrete using lightweight aggregates. Theodore Bremner Symposium on High-performance Lightweight Concrete as a part of the sixth CANMET/ACI international conference on durability of concrete, June, Greece, John Ries, Thomas Holm, (Eds.), 2003, pp. 45–64.
14. Revisting the protected paste volume concept for internal curing of high-strength concretes10.1016/j.cemconres.2011.05.007 ↗
15. T.A. Hammer, Ø. Bjøntergaard, E. Sellevold, Internal curing-Role of absorbed water in aggregates. International Symposium sponsored by ACI committee 213. High-performance structural lightweight concrete, SP-218, Phoenix, Arizona, John Ries, Thomas Holm, (Eds.), 2002, pp. 131–142.
16. Modeling of internal curing in manuring mortar10.1016/j.cemconres.2011.04.013 ↗
17. Effect of internal curing on moisture gradient distribution and deformation of a concrete pavement slab containing pre-wetted lightweight fine aggregates10.1080/07373937.2014.952740 ↗
18. Henkensiefken · 2008
19. Water absorption and electrical conductivity for internally cured motars with a w/c between 0.30 and 0.4510.1061/(ASCE)MT.1943-5533.0000377 ↗
20. R. Henkensiefken, T. Nantung, W.J. Weiss, Reducing restrained shrinkage cracking in concrete: examining the behavior of self-curing concrete made using different volumes of saturated lightweight aggregate, in: National Concrete Bridge Conference, St. Louis, MO, 2008.
21. Shrinkage mitigation strategies in cementitious systems: a closer look at differences in sealed and unsealed behavior10.3141/2070-08 ↗
22. K. Kohler, O.M. Jensen, Internal curing of concrete, state-of-the-art Report of RILEM Technical Committee 196-ICC, RILEM REPORT 41, 2007.
23. Prediction of differential drying shrinkage in concrete10.1016/S0008-8846(98)00077-5 ↗
24. A practical procedure for the analysis of moisture transfer within concrete due to drying10.1680/macr.1997.49.179.129 ↗
25. Moisture diffusion of concrete considering self-desiccation at early ages10.1016/S0008-8846(99)00192-1 ↗
26. Moisture diffusion in cementitious materials adsorption isotherms10.1016/1065-7355(94)90033-7 ↗
27. Drying of saturated lightweight concrete: an experimental investigation10.1007/BF02485989 ↗
28. P. Fotana, S. Pirskawetz, F. Weise, B. Meng, Detection of early-age cracking due to restrained autogenous shrinkage, in: Conference on Advances in Construction Materials, Stuttgart, Germany, 2007.
29. Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age10.1016/j.conbuildmat.2015.08.093 ↗
30. Moisture in concrete subjected to different kinds of curing10.1007/BF02486397 ↗
31. Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes10.1016/j.cemconres.2004.06.028 ↗
32. Experimental studies on shrinkage of high-performance concrete10.1016/S0008-8846(98)00068-4 ↗
33. Moisture profiles in drying concrete10.1680/1988.1.3.164 ↗
34. Discussion: factors influencing relative humidity in concrete10.1680/macr.1991.43.157.305 ↗
35. Self-desiccation and its importance in concrete technology10.1007/BF02486354 ↗
36. Chen · 2015
37. Calculation of moisture distribution in early-age concrete
38. Hygro-thermo-chemo-mechanical model-ling of concrete at early ages and beyond. Part I: Hydration and hygro-thermal phenomena10.1002/nme.1615 ↗
39. Effect of pre-soaked superabsorbent polymer on shrinkage of high-strength concrete10.1617/s11527-014-0351-2 ↗
40. Internal curing of high-performance concrete with pre-soaked fine lightweight aggregate for prevention of autogenous shrinkage cracking10.1016/j.cemconres.2008.02.001 ↗
41. Modeling of water migration during internal curing with superabsorbent polymers10.1061/(ASCE)MT.1943-5533.0000448 ↗
42. Effect of internal curing with super absorbent polymers on the relative humidity of early-age concrete10.1016/j.conbuildmat.2015.08.042 ↗
43. The influence of the initial moisture content of lightweight aggregate on internal curing10.1016/j.conbuildmat.2012.02.074 ↗
44. Chinese Standard, Lightweight aggregates and its test methods-part2: test methods for lightweight aggregates, Standard GB/T 17431.2-2010, General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Beijing, 2010 (in Chinese).
45. Internal curing efficiency of pre-wetted LWFAs on concrete humidity and autogenous shrinkage development10.1061/(ASCE)MT.1943-5533.0000883 ↗
46. Water absorption in internally cured mortar made with water-filled lightweight aggregate10.1016/j.cemconres.2009.06.009 ↗
47. ASTM, Standard specification for lightweight aggregate for internal curing of concrete. Standard C1761/C1761M-13b, West Conshohocken, PA, 2013.
48. Mixture proportioning for internal curing
49. Protected paste volume in concrete: extension tointernal curing using saturated lightweight fine aggregate10.1016/S0008-8846(99)00178-7 ↗
50. Water-entrained cement-based materials-I: principle and theoretical background10.1016/S0008-8846(01)00463-X ↗
51. Self-curing concrete: water retention, hydration and moisture transport10.1016/j.conbuildmat.2006.02.007 ↗
52. Effect of pre-wetted light-weight aggregate on internal relative humidity and autogenous shrinkage of concrete10.1007/BF02861491 ↗
53. ASTM, Standard practice for maintaining constant relative humidity by means of aqueous solutions. Standard E104-02, West Conshohocken, PA, 2002.
54. ASTM, Standard practice for making and curing concrete test specimens in the laboratory. Standard C192/C192M-06, West Conshohocken, PA, 2006.
55. Influence of mineral additions and different compositional parameters on the shrinkage of structural expanded clay lightweight concrete10.1016/j.matdes.2013.12.013 ↗
56. Blended cement and lightweight concrete using scoria: mix design, strength, durability and heat insulation characteristics
57. Water permeability and chloride penetrability of high-strength lightweight aggregate concrete10.1016/S0008-8846(01)00738-4 ↗
58. Internal relative humidity distribution in high-performance cement paste due to moisture diffusion and self-desiccation10.1016/j.cemconres.2005.07.006 ↗
59. Influence of superabsorbent polymers on hydration of cement pastes with low water-to-binder ratio10.1007/s10973-013-3359-x ↗
60. Justification and refinements of Model B3 for concrete creep and shrinkage 1. Statistic and sensitivity10.1007/BF02473078 ↗