Rational design of cement composites containing pozzolanic additions
Source abstract
Abstract
Abstract In cement composite design, pozzolanic additions (PAs) are primarily considered as mass equivalents of cement to be replaced. This paper presents a modification to the traditional approach that takes into account the amounts of active and passive components in a particular PA. The practical application of the modified design method is demonstrated for a red-ceramic residue from brick production. First, the residue is physically and chemically characterized via particle size distribution analysis, X-ray fluorescence spectroscopy, the Chapelle test of pozzolanic activity, and quantitative X-ray diffraction analysis to obtain detailed information on its activity. Subsequently, the effective pozzolanic properties of the residue are assessed by investigating the lime hydrate-ceramic system using solid-state magic angle spinning 27 Al and 29 Si nuclear magnetic resonance spectroscopy analysis and compressive strength measurements. Finally, cement composites containing different dosages of the ceramic residue are designed using the modified approach and their mechanical and durability properties are compared with reference samples prepared via the conventional method. The experimental results show an improvement of up to 35% in compressive strength and a significant gain in freeze/thaw resistance using the proposed approach.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Supplementary cementitious materials10.1016/j.cemconres.2010.12.001 ↗
2. Effect of supplementary cementitious materials on reduction of CO2 emissions from concrete10.1016/j.jclepro.2014.03.018 ↗
3. Evaluation of West Texas natural zeolite as an alternative of ASTM Class F fly ash10.1016/j.conbuildmat.2013.04.041 ↗
4. Engineering properties of concrete containing natural zeolite as supplementary cementitious material: strength, toughness, durability, and hygrothermal performance10.1016/j.cemconcomp.2014.09.013 ↗
5. Comparison of test methods to assess pozzolanic activity10.1016/j.cemconcomp.2009.10.008 ↗
6. Pozzolanic activity of clinoptilolite: a comparative study with silica fume, fly ash and a non-zeolitic natural pozzolan10.1016/j.cemconres.2009.10.016 ↗
7. Indirect and direct Chapelle’s methods for the determination of lime consumption in pozzolanic materials10.1590/S1983-41952015000100002 ↗
8. Comparison of the retarding mechanisms of zinc oxide and sucrose on cement hydration and interactions with supplementary cementitious materials10.1016/j.cemconres.2015.02.023 ↗
9. Comprehensive phase characterization of crystalline and amorphous phases of a class F fly ash10.1016/j.cemconres.2009.08.029 ↗
10. X-ray powder diffraction-based method for the determination of the glass content and mineralogy of coal (co)-combustion fly ashes10.1016/j.fuel.2009.11.024 ↗
11. Evaluation of pozzolanic reactivity of artificial pozzolans
12. Rice husk ash (RHA) effectiveness in cement and concrete as a function of reactive silica and fineness10.1016/j.cemconres.2014.04.001 ↗
13. Microstructure of cement pastes with residual rice husk ash of low amorphous silica content10.1016/j.conbuildmat.2014.12.059 ↗
14. Massive volcanic glass: natural pozzolan in the west of São Paulo State
15. The effect of natural zeolites on the early hydration of Portland cement10.1016/S1387-1811(03)00369-X ↗
16. Classification of a-SiO2 Rich materials10.4028/www.scientific.net/MSF.824.33 ↗
17. Metakaolin as supplementary cementitious material: optimization of kaolin to metakaolin conversion10.1007/s10973-005-0806-3 ↗
18. Mechanical and mineralogical properties of natural hydraulic lime-metakaolin mortars in different curing conditions10.1016/j.conbuildmat.2013.10.045 ↗
19. Calcined kaolin as cement replacing material and its use in high strength concrete10.1016/j.conbuildmat.2015.02.050 ↗
20. Reusing ceramic wastes in concrete10.1016/j.conbuildmat.2009.10.023 ↗
21. Use of waste brick as a partial replacement of cement in mortar10.1016/j.wasman.2009.03.026 ↗
22. Characterization of ceramic roof tile wastes as pozzolanic admixture10.1016/j.wasman.2008.10.019 ↗
23. An investigation of Roman mortar technology through the petrographic analysis of archaeological material10.1016/j.conbuildmat.2007.05.003 ↗
24. Calcined kaolinite–bentonite clay blends as supplementary cementitious materials10.1016/j.clay.2015.01.025 ↗
25. Estimation of the cementitious properties of various industrial by-products for applications requiring low mechanical strength10.1016/j.resconrec.2011.08.008 ↗
26. Permeability properties of concretes with high reactivity metakaolin and calcined impure kaolin10.1617/s11527-013-0090-9 ↗
27. Effectiveness of novel and traditional methods to incorporate industrial wastes in cementitious materials—an overview10.1016/j.resconrec.2013.03.003 ↗
28. A study of the mechanical properties of ground ceramic powder concrete incorporating nano-SiO2 particles10.1016/j.conbuildmat.2012.07.110 ↗
29. Kaolinitic calcined clays – Portland cement system: Hydration and properties10.1016/j.conbuildmat.2014.04.065 ↗
30. ČSN EN 933-2. Tests for Geometrical Properties of Aggregates. Determination of Particle Size distribution. Test sieves, Nominal Size of Apertures, Institute: Czech Standardization; 1997.
31. ČSN EN 196-6. Methods of Testing Cement. Part 6: Determination of Fineness, Institute: Czech Standardization; 2011.
32. NF P 18-513. Metakaolin, addition pouzzolanique pour betons. Definitions, specifications, criteres de conformite. AFNOR, Saint-Denis, 2010.
33. ČSN EN 1015-3. Methods of Test for Mortar for Masonry. Determination of Consistence of Fresh Mortar (by flow table), Institute: Czech Standardization; 2001.
34. ČSN EN 1015-11. Methods of Test for Mortar for Masonry. Determination of Flexural and Compressive Strength of Hardened Mortar, Institute: Czech Standardization; 2000.
35. Interface induced growth and transformation of polymer-conjugated Proto-crystalline phases in aluminosilicate hybrids: a multiple-quantum 23Na-23Na MAS NMR correlation spectroscopy study10.1021/acs.langmuir.5b04736 ↗
36. Heating of samples induced by fast magic-angle spinning10.1016/S0926-2040(00)00061-8 ↗
37. ČSN EN 12350-2. Testing Fresh Concrete. Slump-Test. Institute: Czech Standardization; 2009.
38. ČSN EN 12 390-3. Testing Hardened Concrete. Compressive Strength of Test Specimens, Institute: Czech Standardization; 2002.
39. ČSN 731322, Determination of Concrete Frost Resistance, Institute: Czech Standardization; 1969.
40. ČSN EN 12390-6. Testing Hardened Concrete. Part 6: Tensile Splitting Strength of Test Specimens, Institute: Czech Standardization; 2001.
41. Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production10.1016/j.conbuildmat.2014.04.117 ↗
42. Maximum feasible use of recycled sand from construction and demolition waste for eco-mortar production – Part-I: Ceramic masonry waste10.1016/j.jclepro.2014.10.084 ↗
43. Simultaneous DSC and TG analysis of high-performance concrete containing natural zeolite as a supplementary cementitious material10.1007/s10973-015-4546-8 ↗
44. Solid-state NMR characterisation of the thermal transformation of a Hungarian white illite10.1016/j.ssnmr.2005.04.001 ↗
45. Incorporation of aluminum in the calcium silicate hydrate (C-S-H) of hydrated Portland cements: a high-field 27Al and 29Si MAS NMR investigation10.1021/ic020607b ↗
46. C-S-H Gels: interpretation of 29Si MAS-NMR spectra10.1111/j.1551-2916.2012.05091.x ↗
47. Structural characterization of C-S-H gel through an improved deconvolution analysis of NMR spectra10.1007/s10853-013-7688-8 ↗
48. Mackenzie · 2002
49. Utilization and efficiency of ground granulated blast furnace slag on concrete properties – A review10.1016/j.conbuildmat.2015.12.153 ↗
50. Durability of mortar and concrete made up of pozzolans as a partial replacement of cement: A review10.1016/j.conbuildmat.2016.04.147 ↗
51. Metakaolin and calcined clays as pozzolans for concrete: a review10.1016/S0958-9465(00)00092-5 ↗
52. Influence of metakaolin on the properties of mortar and concrete: A review10.1016/j.clay.2008.11.007 ↗