journal article·2017-12

Study on the degradation mechanism of sulphoaluminate cement sea sand concrete eroded by biological sulfuric acid

Xin Li, Xujian Lin, Kui Lin, Tao Ji

Publisher page

Abstract

Abstract Two different types sulfuric acids, i.e. the biological sulfuric acid (BSA) produced by T.t bacteria (Thiobacillus thiooxidans) and chemical sulfuric acid (CSA), were applied to simulate the corrosion. The sulphoaluminate cement (SAC) and the sea sand were mixed to made the concrete. The mass loss, compressive strength, chloride binding rate, pH value and pore structure were measured in the process of corrosion. Furthermore, X-ray diffraction (XRD) and scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS) were used to analyze the products of the reaction. It could be found that under the corrosion of sulfuric acid, the initial hydration products of SAC, including ettringite (AFt) and Friedels’ salt, were decomposed continuously and the main corrosion product was dihydrate gypsum. Under corrosion of BSA, the corrosion became more intense due to the influence of bacterial effect. Moreover, the corrosion of BSA was more severe than that of CSA, which was obvious in terms of mass loss, strength decline and pore structure. The BSA has a more negative effect on the performance of SAC concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Odor and Emission Control Technologies · Corrosion Behavior and Inhibition · Industrial Gas Emission Control

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Control concrete sewer corrosion via the crown spray process10.2175/106143096X127785 ↗
2. Hou · 1999
3. Thaer · 2001
4. The corrosion of concrete10.1038/icb.1945.13 ↗
5. Quantifying microbially induced deterioration of concrete initial studies10.1016/S0964-8305(02)00049-5 ↗
6. Influence of layered double hydroxides on microstructure and carbonation resistance of sulphoaluminate cement concrete10.1016/j.conbuildmat.2013.07.049 ↗
7. Studies on effects of activators on properties and mechanism of hydration of Sulphoaluminate cement10.1016/S0008-8846(02)00954-7 ↗
8. Durability of concrete under multi-damage action10.1007/BF03000175 ↗
9. Impermeability of Sulphoaluminate cement mortar modified by redispersible polymer powders
10. Preparation of Sulphoaluminate cement-based material from municipal solid waste incineration fly ash10.1166/asl.2012.1957 ↗
11. Mechanical and durability properties of concrete made with dredged marine sand10.1016/j.conbuildmat.2011.04.053 ↗
12. Effect of mixing proportions of concrete on its electrical conductivity and the rapid chloride permeability test (ASTM C1202 or ASSHTO T277) results10.1016/j.cemconres.2003.09.007 ↗
13. Functions of sea- sand and fly- ash in the reinforced concrete in marine engineering and their application effect
14. Suitability of sea water for mixing structural concrete exposed to a marine environment10.1016/0958-9465(95)00015-5 ↗
15. Workability, mechanical properties and affinity of artificial reef concrete10.1016/j.conbuildmat.2015.05.109 ↗
16. Study on sulfuric acid corrosion under stress states for steel fiber reinforced concrete made by spun-cast method
17. Biogenic sulfuric acid attack on different types of commercially produced concrete sewer pipes10.1016/j.cemconres.2009.10.002 ↗
18. Experimental research and prediction of the effect of chemical and biogenic sulfuric acid on different types of commercially produced concrete sewer pipes10.1016/j.cemconres.2004.02.015 ↗
19. Performance of sewer pipe concretemixtures with portland and calcium aluminate cements subject to mineral and biogenic acid attack10.1617/s11527-010-9629-1 ↗
20. Biogenic and chemical sulfuric acid corrosion of mortars10.1061/(ASCE)0899-1561(1999)11:4(340) ↗
21. Chemical and microbiological tests to simulate sulfuric acid corrosion of polymer-modified concrete10.1016/S0008-8846(01)00565-8 ↗
22. Chemical, microbiological, and in situ test methods for biogenic sulfuric acid corrosion of concrete10.1016/S0008-8846(00)00219-2 ↗
23. GB/T14685-2001, Pebbie and crushed stone for building. General Administration of Quality Supervision, Inspection and Quarantine of the PRC. (2001).
24. GB/T14684-2001, Sand for construction. General Administration of Quality Supervision, Inspection and Quarantine of the PRC. (2001).
25. JGJ 55-2011, Specification for mix proportion design of ordinary concrete. Ministry of Housing and Urban-Rural Construction of the PRC. (2011).
26. R.E. Buchanan, N.E. Gibbons, Bergey's manual of determinative bacteriology: 8th ed. Williams and Wilkins, Baltimore, Maryland.
27. Investigations of sulfuric acid corrosion of concrete. I: modeling and chemical observations[J]10.1061/(ASCE)0733-9372(2001)127:7(572) ↗
28. Comparative analysis of biogenic and chemical sulfuric acid attack on hardened cement paste using laser ablation-ICP-MS10.1016/j.cemconres.2016.05.003 ↗
29. JTJ270-1998, Testing code of concrete for port and waterwog engineering. Ministry of Communications of the PRC. (1998).
30. Acid attack on hydrated cement — effect of mineral acids on the degradation process10.1016/j.cemconres.2015.03.011 ↗
31. Tittelboom · 2013 · 251
32. A discussion of the paper “The penetration of chlorides into hardened cement pastes” by H.D. Midgley and J.M. Illston [J]10.1016/0008-8846(85)90165-6 ↗
33. Mechanism of Friedel's salt formation in cements rich in tri-calcium aluminate10.1016/S0008-8846(96)85009-5 ↗
34. Accelerated carbonation of Friedel's salt in calcium aluminate cement paste10.1016/S0008-8846(02)00910-9 ↗