journal article·2017-12

Addition of biomass ash in concrete: Effects on E-Modulus, electrical conductivity at early ages and their correlation

Mirian Velay-Lizancos, Miguel Azenha, Isabel Martínez-Lage, Pablo Vázquez-Burgo

Publisher page

Abstract

Abstract This research aims to study the influence of biomass ashes in the evolution of E-Modulus at an early age (0–7 days) in concretes with different percentages of replacement of cement by biomass ash (0%, 15% and 30%). Its behaviour was evaluated through the continuous monitoring of the E-Modulus method as well as using a NDT: measurement of internal electrical conductivity. Whereas at 7 days the influence of a replacement of 15% of biomass ash on E-Modulus is negligible, during the first day the negative influence is very important, with values of loss of E-Modulus higher than 70%. The influence of the biomass ash in the evolution of internal electrical conductivity suggests that the biomass ash could reduce the chloride ion penetration resistance, even in concrete with 15% of biomass ash that did not induce a decrease of the E-Modulus at 7 days. The influence of the biomass ash in the correlations of E-Modulus and electrical conductivity has been studied. Maturity corrections were made.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (61)

Show source-provided references
1. Properties of plain concrete made with mixed recycled coarse aggregate10.1016/j.conbuildmat.2012.07.045 ↗
2. Recycled aggregate concrete as structural material10.1617/s11527-006-9161-5 ↗
3. Effects of copper slag and recycled concrete aggregate on the properties of CIR mixes with bitumen emulsion, rice husk ash, Portland cement and fly ash10.1016/j.conbuildmat.2015.08.021 ↗
4. Chloride penetration resistance of concrete mixtures with recycled concrete aggregates, in Brittle Matrix Composites 10
5. Shear strength of RC beams. precision, accuracy, safety and simplicity using genetic programming10.12989/cac.2014.14.4.479 ↗
6. Predicting modulus elasticity of recycled aggregate concrete using M5′ model tree algorithm10.1016/j.conbuildmat.2015.06.055 ↗
7. Pavement concrete with air-cooled blast furnace slag and dolomite as coarse aggregates: effects of deicers and freeze-thaw cycles10.3141/2508-07 ↗
8. A preliminary concrete mix design for SCC with marble powders10.1016/j.conbuildmat.2008.08.012 ↗
9. Concrete properties containing fine aggregate marble powder10.1007/s12205-015-0327-y ↗
10. Abrasion resistance of concrete containing selected mineral powders10.1016/j.proeng.2016.08.209 ↗
11. selected physical properties of concrete modified using mineral powders10.1016/j.proeng.2017.02.097 ↗
12. Laboratory studies to investigate the properties of CIR mixes containing steel slag as a substitute for virgin aggregates10.1016/j.conbuildmat.2011.06.047 ↗
13. Characterization of lightweight mortars containing wood processing by-products waste10.1016/j.conbuildmat.2016.07.011 ↗
14. Concretes containing biomass ashes: mechanical, chemical, and ecotoxic performances10.1016/j.conbuildmat.2013.07.031 ↗
15. Concretes and mortars with waste paper industry: biomass ash and dregs10.1016/j.jenvman.2016.06.052 ↗
16. P. Vazquez-Burgo, I. Martinez-Lage, C. Vazquez-Herrero, M. Velay-Lizancos,“Estudio sobre la utilización de cenizas de biomasa para la fabricación de un nuevo material de construcción”, in Greencities & Sustainability conf.; Intelligence applied to urban sustainability, 2014 Málaga (Spain).
17. Cork waste in cement based materials10.1016/j.matdes.2015.06.082 ↗
18. The influence of tailings and cement type on durability properties of self-compacting concrete
19. Durability enhancement of scc with waste glass powder10.1590/1980-5373-MR-2015-0288 ↗
20. Suitability of mortars produced using laterite and ceramic wastes: mechanical and microscale analysis10.1016/j.conbuildmat.2017.05.031 ↗
21. Lime mud from papermaking process as a potential ameliorant for pollutants at ambient conditions: a review10.1016/j.jclepro.2014.06.052 ↗
22. European Parliament, “Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on waste and repealing certain Directives,” 2008.
23. Plant biomass ashes in cement-based building materials. feasibility as eco-efficient structural mortars and grouts10.1016/j.scs.2017.03.001 ↗
24. Standard specification for coal fly ash and raw or calcined natural pozzolan for use in concrete
25. CEN European Committee for Standardization, “EN 450-1:2005+A1:2007. Fly ash for concrete. Part 1: Definition, specifications and conformity criteria.” 2005.
26. Characterisation and use of biomass fly ash in cement-based materials10.1016/j.jhazmat.2009.07.109 ↗
27. Strength and durability of cement with forest waste bottom ash10.1016/j.conbuildmat.2012.11.081 ↗
28. Mortar with wood waste ash: mechanical strength carbonation resistance and ASR expansion10.1016/j.conbuildmat.2013.08.026 ↗
29. Characterization and evaluation of fly-ash from co-combustion of lignite and wood pellets for use as cement admixture10.1016/j.fuel.2010.05.027 ↗
30. Comprehensive study of biomass fly ash in concrete: strength, microscopy, kinetics and durability10.1016/j.fuproc.2007.06.016 ↗
31. Biomass fly ash in concrete: mixture proportioning and mechanical properties10.1016/j.fuel.2007.05.026 ↗
32. An overview of the chemical composition of biomass10.1016/j.fuel.2009.10.022 ↗
33. Biomass fly ash in concrete: SEM, EDX and ESEM analysis10.1016/j.fuel.2007.05.024 ↗
34. Moisture damage resistance of hot-mix asphalt made with paper industry wastes as filler10.1016/j.jclepro.2015.06.016 ↗
35. Influence of temperature in the evolution of compressive strength and in its correlations with UPV in eco-concretes with recycled materials10.1016/j.conbuildmat.2016.07.104 ↗
36. C. E. C. for Standardization, “EN 196-3: 2009. Methods of testing cement. Part 3: Determination of setting times and soundness”, 2009.
37. Holcim, Ficha de datos de seguridad Cemento. http://www.holcim.es/fileadmin/ templates/ESP/doc/Fichas_Seguridad_Cemento/Ficha_Datos_Seguridad_Cemento.pdf (Accessed 07.04.16). 2015.
38. M. Azenha, J. L. Granja, and C. Dunant, “EMM-ARM Retrospective and current developments. Presentations eBook according to 1st WORKSHOP with Focus on experimental testing of cement-based materials held in Ljubljana, Slovenia, April, pp 16-17, ISBN (e-book): 978-3-85125-434-1”, 2015.
39. Measurement of concrete E-modulus evolution since casting: a novel method based on ambient vibration10.1016/j.cemconres.2010.02.014 ↗
40. M. Azenha, F. Magalhães, R. Faria, and A. Cunha, “New method for continuous monitoring of concrete E-modulus since casting,” in Concrete under Severe Conditions: Environment and Loading - Proceedings of the 6th International Conference on Concrete under Severe Conditions, CONSEC’10, 2010, vol. 2.10.1201/b10552-235 ↗
41. Measurement of the E-modulus of cement pastes and mortars since casting, using a vibration based technique
42. Continuous monitoring of concrete E-modulus since casting based on modal identification: a case study for in situ application10.1016/j.cemconcomp.2012.04.004 ↗
43. Influence of the cementitious paste composition on the E-modulus and heat of hydration evolutions10.1016/j.cemconres.2011.03.008 ↗
44. Identification of the percolation threshold in cementitious pastes by monitoring the E-modulus evolution10.1016/j.cemconcomp.2012.03.001 ↗
45. E-modulus evolution and its relation to solids formation of pastes from commercial cements10.1016/j.cemconres.2012.03.013 ↗
46. Towards a robust and versatile method for monitoring E-modulus of concrete since casting: Enhancements and extensions of EMM-ARM10.1111/str.12232 ↗
47. Granja · 2016
48. CEN European Committee for Standardization, “EN 12390-13:2013. Testing hardened concrete. Part 13: Determination of secant modulus of elasticity in compression”, 2013.
49. Consensor, ConSensor 2.0 – User Manual. http://www.consensor.eu/docs/user-manual.pdf 2017.
50. Van Beek · 2000
51. Influence of the aggregate volume on the electrical resistivity and properties of portland cement concretes10.1007/s11595-011-0346-6 ↗
52. Analytical and genetic programming model of compressive strength of eco concretes by NDT according to curing temperature10.1016/j.conbuildmat.2017.03.123 ↗
53. Experimental investigation and modeling of hydration and performance evolution of fly ash cement10.1617/s11527-013-0126-1 ↗
54. C. Andrade and R. D’Andrea, “The use of electrical resistivity as a NDT for the specification of concrete durability,” in Concrete under Severe Conditions: Environment and Loading - Proceedings of the 6th International Conference on Concrete under Severe Conditions, CONSEC’10, 2010, vol. 1.10.1201/b10552-22 ↗
55. Chloride ion penetration in concrete: the reaction factor in the electrical resistivity model10.1016/j.cemconcomp.2013.09.022 ↗
56. C. Andrade and R. D’Andréa, “Concrete mixture design based on electrical resistivity,” in 2nd International Conference on Sustainable Construction Materials and Technologies, 2010.
57. W. Shuangzhen and L. Baxter, Biomass ash in concrete- mitigation of Alkali Silica Reactions (ASRs) expansions with different opal percentages, vol. 400–402, 2009.10.4028/www.scientific.net/KEM.400-402.131 ↗
58. P. R. Rangaraju, K. Sompura, J. Desai, and J. Olek, “Potential of potassium acetate deicer to induce ASR in concrete, and its mitigation,” in Proceedings of the 2006 Airfield and Highway Pavement Specialty Conference, 2006, vol. 2006.10.1061/40838(191)58 ↗
59. The mechanism of limited inhibition by fly ash on expansion due to alkali–silica reaction at the pessimum proportion10.1016/j.cemconres.2016.11.002 ↗
60. Standard practice for estimating concrete strength by the maturity method
61. Maturity computer for controlled curing and hardening of concrete