journal article·2018-03

Electrical resistivity reduction with pitch-based carbon fiber into multi-walled carbon nanotube (MWCNT)-embedded cement composites

Hyeong Min Park, G.M. Kim, Sol Yi Lee, Haemin Jeon, Seong Yun Kim, Minkook Kim, Jae Woo Kim, Yong Chae Jung, B.J. Yang

Publisher page

Abstract

Abstract Recently, various functional construction materials based on carbon nanotubes (CNTs) are being researched; however, there are very few examples of practical use due to cost and workability obstacles. In order to overcome these limitations, we studied the electrical characteristics of multi-phase cement composites containing multi-walled carbon nanotubes (MWCNTs) and economical pitch-based carbon fiber (CF). Test specimens with various formulations of the CF length, content, and water/cement (w/c) ratio are manufactured and their properties are evaluated. The pitch-based CFs used in the experiments were analyzed by Raman spectroscopy and X-ray photoelectron spectroscopy (XPS). The resistance of the conductive cement composites was measured by a two-probe method, and the viscosity was evaluated using a rheometer immediately after the mixing process. In addition, the internal structure of the specimens was analyzed using a scanning electron microscope (SEM) and by micro-computed tomography (Micro-CT) analyses. It was observed that the incorporation of CFs into the CNT-embedded cement composite causes the CFs to serve as a bridge between CNT particles, thus maintaining the homogeneity of the conductive network in the composites. In addition, although an increase of the w/c ratio improved the viscosity of the composites by 90%, the electrical resistivity was retained due to the bridging effect of the CF.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Advanced Energy Technologies and Civil Engineering Innovations · Conducting polymers and applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. The evolution of and the way forward for advanced polymer composites in the civil infrastructure10.1016/S0950-0618(03)00038-2 ↗
2. Micromechanics-based viscoelastic damage model for particle-reinforced polymeric composites10.1007/s00707-012-0651-y ↗
3. From straw in bricks to modern use of microfibers in cementitious composites for improved autogenous healing–A review10.1016/j.conbuildmat.2015.07.018 ↗
4. Human domination of Earth's ecosystems10.1126/science.277.5325.494 ↗
5. Kibert · 2016
6. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes10.1016/j.carbon.2004.12.017 ↗
7. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
8. Effect of polymer admixtures to cement on the bond strength and electrical contact resistivity between steel fiber and cement10.1016/0008-8846(95)00201-4 ↗
9. Elastoplastic modeling of polymeric composites containing randomly located nanoparticles with an interface effect10.1016/j.compstruct.2012.11.043 ↗
10. Mechanical characteristics and strengthening effectiveness of random-chopped FRP composites containing air voids10.1016/j.compositesb.2014.02.015 ↗
11. Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume10.1016/j.conbuildmat.2016.11.100 ↗
12. Influence of fiber volume fraction and fiber type on mechanical properties of FRLACC10.1177/0731684409103702 ↗
13. Conductivity of carbon fiber reinforced cement-based composites10.1016/S0958-9465(02)00138-5 ↗
14. Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume10.1016/j.compstruct.2013.07.042 ↗
15. Electrical characteristics of hierarchical conductive pathways in cementitious composites incorporating CNT and carbon fiber10.1016/j.cemconcomp.2017.06.004 ↗
16. Effect of CNT agglomeration on the electrical conductivity and percolation threshold of nanocomposites: a micromechanics-based approach
17. A combined analytical formulation and genetic algorithm to analyze the nonlinear damage responses of continuous fiber toughened composites
18. Synergistic effect of MWNT/fly ash incorporation on the EMI shielding/absorbing characteristics of cementitious materials10.1016/j.conbuildmat.2016.04.082 ↗
19. Enhanced thermoelectric effect of cement composite by addition of metallic oxide nanopowders for energy harvesting in buildings10.1016/j.conbuildmat.2016.04.035 ↗
20. Pressure-sensitive properties and microstructure of carbon nanotube reinforced cement composites10.1016/j.cemconcomp.2006.12.011 ↗
21. A theoretical study on the piezoresistive response of carbon nanotubes embedded in polymer nanocomposites in an elastic region10.1016/j.carbon.2017.05.059 ↗
22. Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites10.1016/j.compstruct.2015.10.010 ↗
23. The electrically conductive carbon nanotube (CNT)/cement composites for accelerated curing and thermal cracking reduction10.1016/j.compstruct.2016.09.014 ↗
24. Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio10.1016/j.compstruct.2014.06.007 ↗
25. The electronic and structural characteristics of carbon fibers from mesophase pitch10.1016/0008-6223(79)90071-X ↗
26. Structure of mesophase pitch-based carbon fibres10.1007/BF01174692 ↗
27. Influences of CNT dispersion and pore characteristics on the electrical performance of cementitious composites10.1016/j.compstruct.2016.12.049 ↗
28. Carbon fiber-reinforced cement as a thermistor10.1016/S0008-8846(99)00075-7 ↗
29. Cement reinforced with short carbon fibers: a multifunctional material10.1016/S1359-8368(99)00071-2 ↗
30. Electrical conductivity of self-monitoring CFRC10.1016/j.cemconcomp.2004.09.001 ↗
31. Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing10.1016/j.cemconcomp.2012.04.007 ↗
32. ASTM C 109 · 2007
33. ASTM D257-07 · 2007
34. ASTM B 193-02 · 2002
35. Phonons in carbon nanotubes10.1080/000187300413184 ↗
36. Raman spectrum of graphite10.1063/1.1674108 ↗
37. Electrospun nanocomposite polyacrylonitrile fibers containing carbon nanotubes and cobalt ferrite10.1002/pc.21251 ↗
38. Polyethylene multiwalled carbon nanotube composites10.1016/j.polymer.2005.06.094 ↗
39. Work functions and surface functional groups of multiwall carbon nanotubes10.1021/jp991659y ↗
40. Raman study of multiwalled carbon nanotubes functionalized with oxygen groups
41. Self-heating structural materials10.1088/0964-1726/13/3/015 ↗
42. Nonlinear conduction in carbon fiber reinforced cement mortar10.1016/j.cemconcomp.2010.10.007 ↗
43. A study on electrical and thermal properties of conductive concrete10.12989/cac.2013.12.3.337 ↗
44. Electric polarization and depolarization in cement-based materials, studied by apparent electrical resistance measurement10.1016/j.cemconres.2003.09.003 ↗
45. Conduction stability of high-density polyethylene/carbon black composites due to electric field action10.1016/j.eurpolymj.2005.04.043 ↗
46. Effect of superplasticizer type and siliceous materials on the dispersion of carbon nanotube in cementitious composites
47. Percolation threshold and piezoresistive response of multi-wall carbon nanotube/cement composites10.12989/sss.2016.18.2.217 ↗
48. Experimental study on the engineering properties of carbon fiber reinforced cement composites10.1016/0008-8846(91)90110-4 ↗