Polarization behavior of activated reinforcing steel bars in concrete under chloride environments
Source abstract
Abstract
Abstract Polarization behavior of activated reinforcing steel bars (rebars) in concrete was investigated by use of measured cathodic polarization curves. Five factors thought to contribute to the polarization behavior of rebars in concrete were examined, including relative humidity, Cl− content, rebar diameter, water-cement ratio and corrosion duration. The Levenberg-Marquardt curve-fitting algorithm made it possible to determine the corrosion rate and electrochemical parameters of underlying anodic and cathodic sub-process simultaneously. Degrees of activation polarization and concentration polarization related to cathodic reaction were quantified. A prediction model for the average value of corrosion rate in regard to the whole surface of a corroded rebar was proposed based on the electrochemical corrosion theory. Finally, the accuracy of this model was testified by comparing the predictions of this model with published corrosion test results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Bertolini · Corros. Steel Concr. · 200310.1002/3527603379 ↗
2. Physical model for steel corrosion in concrete sea structures – theory10.1061/JSDEAG.0005168 ↗
3. Effect of moisture on the spatial uniformity of cathodic protection of steel in reinforced concrete10.5006/1.3278188 ↗
4. The effect of temperature on the corrosion of steel in concrete. part 1: simulated polarization resistance tests and model development10.1016/j.corsci.2008.10.034 ↗
5. Modelling steel corrosion in concrete structures
6. Effects of Tafel slope, exchange current density and electrode potential on the corrosion of steel in concrete10.1002/maco.200604043 ↗
7. Detailed modeling of corrosion macrocells on steel reinforcing in concrete10.1016/S0010-938X(00)00158-X ↗
8. Relation between resistivity and corrosion rate of reinforcements in carbonated mortar made with several cement types10.1016/0008-8846(88)90091-9 ↗
9. General guidelines for durability design and redesign: duracrete, probabilistic performance based durability design of concrete structures
10. Modeling the dynamic corrosion process in chloride contaminated concrete structures10.1016/S0008-8846(98)00259-2 ↗
11. Structural reliability of concrete bridges including improved chloride-induced corrosion models10.1016/S0167-4730(00)00018-7 ↗
12. Influence of the degree of pore saturation on the resistivity of concrete and the corrosion rate of steel reinforcement10.1016/0008-8846(93)90102-F ↗
13. Effects of moisture availability on corrosion kinetics of steel embedded in concrete10.5006/1.3316021 ↗
14. Investigations on the influence of oxygen on corrosion of steel in concrete—part 110.1007/BF02486163 ↗
15. Effect of moisture variation on oxygen consumption rate of corroding steel in chloride contaminated concrete10.1016/j.cemconcomp.2010.09.014 ↗
16. Electrochemical impedance of corrosion macrocells
17. Polarisation behaviour of steel bar samples in concrete in seawater. part 1: experimental measurement of polarisation curves of steel in concrete10.1016/j.corsci.2007.08.009 ↗
18. Polarisation behaviour of steel bar samples in concrete in seawater. part 2: a polarisation model for corrosion evaluation of steel in concrete10.1016/j.corsci.2008.08.021 ↗
19. Electrochemical behaviour of steel in plain and blended cement concretes in sulphate and/or chloride environments10.1016/0950-0618(95)00002-W ↗
20. Corrosion behavior of reinforcement bars embedded in mortar specimens containing ladle furnace slag in partial substitution of aggregate and cement10.1016/j.conbuildmat.2012.08.044 ↗
21. Electrochemistry of reinforcing steel in salt-contaminated concrete
22. Limitations and advantages of electrochemical chloride removal in corroded reinforced concrete structures10.1016/j.cemconres.2007.01.005 ↗
23. Corrosion of reinforcing steel in neutral and acid solutions simulating the electrolytic environments in the micropores of concrete in the propagation period10.1016/j.corsci.2004.06.004 ↗
24. Investigation of steel corrosion in cracked concrete: evaluation of macrocell and microcell rates using Tafel polarization response10.1016/j.corsci.2010.04.030 ↗
25. Effect of protective oxide scales in the macrogalvanic behaviour of concrete reinforcements10.1016/S0010-938X(98)00040-7 ↗
26. Probability distribution model for cross-sectional area of corroded reinforcing steel bars10.1061/(ASCE)MT.1943-5533.0000888 ↗
27. Modeling the time to corrosion cracking in chloride contaminated reinforced concrete structures
28. Climate load model – climate action spectrum for predicting durability of concrete structure10.1016/j.conbuildmat.2011.10.034 ↗
29. Environmental in ¯ uences on linear polarisation corrosion rate measurement in reinforced concrete10.1016/S0963-8695(01)00008-1 ↗
30. Fontana · 2005
31. Electrochemical polarization I. a theoretical analysis of the shape of polarization curves10.1149/1.2428653 ↗
32. Quantitative measurements of corrosion rate of reinforcing steels embedded in concrete using polarization resistance measurements10.1002/maco.19780290804 ↗
33. A.S.T.M. · 2011
34. K. Madsen, H.B. Nielsen, O. Tingleff, Methods for non-linear least squares problems, (1999).
35. Duracrete, General guidelines for durability design and redesign, Eur. Union-Brite Eu Ram III, Proj. No. BE95-1347Probabilistic Perform. Based Durab. Des. Concr. Struct. Doc. 15 (2000).
36. Non-uniform rust expansion for chloride-induced pitting corrosion in RC structures10.1016/j.conbuildmat.2013.10.042 ↗