journal article·2018-05

Effects of the mechanical milling method on transport properties of self-compacting concrete containing perlite powder as a supplementary cementitious material

S. Mahmoud Motahari Karein, Alireza Joshaghani, A.A. Ramezanianpour, Soroush Isapour, Moses Karakouzian

Publisher page

Abstract

Abstract The purpose of this study is to measure the effects of increasing the specific surface area of perlite natural pozzolan in self-compacting concrete (SCC) by the mechanical milling method. The use of SCC in construction projects allows for a reduction of human resources and equipment, which significantly decreases the labor cost and time of construction. SCC often needs chemical additives to achieve workability requirements. However, the usage of a greater amount of chemical additives as well as cement materials in the mixing designs increases the cost of mixing. Incorporation of inexpensive natural pozzolans as an alternative to cementitious materials can improve the fresh properties and durability of concrete. Moreover, reducing the hydration heat and controlling the shrinkage of SCC mixtures, which mainly contain significant amounts of powdered materials, is another benefit of the natural pozzolans. However, the reactivity of natural pozzolans, specifically in the early ages, is always a concern when using these supplementary materials. In this study, several methods have been proposed to improve the reactivity of these materials. Increasing the specific surface area of pozzolanic materials by mechanical milling is one of the most economical and efficient methods implemented so far. This study measured the performance of various levels of perlite powder, a natural pozzolan, for fresh, mechanical and durability properties. In addition, the effects of increasing the specific surface area of perlite powder on properties of concrete were measured and evaluated. According to the results, an increase in the specific surface of perlite powder improved the compressive strength and durability index as a result of increased reactivity. This was accompanied by a substantial improvement in the properties of SCC mixtures in the workability and stability tests.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (66)

Show source-provided references
1. ACI · 2007 · 237R-07
2. Self-Compacting Property of Highly Flowable Concrete, Second CANMET
3. Khayat, K., Hu, C., Monty, H., 1999. Stability of self-consolidating concrete, advantages, and potential applications. Self-Compacting Concrete: Proceedings of the First International RILEM Symposium.
4. Workability retention and compressive strength of self-compacting concrete incorporating pumice powder and silica fume10.1016/j.conbuildmat.2016.12.090 ↗
5. Pumice powder as filler of self-compacting concrete
6. Studying effects of chemical admixtures on the workability retention of zeolitic Portland cement mortar10.1016/j.conbuildmat.2014.09.020 ↗
7. Reducing variations in the test results of self-consolidating lightweight concrete by incorporating pozzolanic materials10.1016/j.conbuildmat.2018.01.121 ↗
8. Design of self-compacting concrete with ground granulated blast furnace slag10.1016/j.matdes.2012.06.049 ↗
9. The effect of trass and fly ash in minimizing alkali-carbonate reaction in concrete10.1016/j.conbuildmat.2017.06.034 ↗
10. Turu’allo · 2013
11. Enhancing the permeability and abrasion resistance of concrete using colloidal nano-SiO2 oxide and spraying nanosilicon practices10.1016/j.conbuildmat.2017.04.078 ↗
12. Early age hydration and pozzolanic reaction in natural zeolite blended cements: reaction kinetics and products by in situ synchrotron X-ray powder diffraction10.1016/j.cemconres.2010.08.012 ↗
13. Dadu, D., et al., 2012 Evaluation of the pozzolanic activity of Kajuru pumice tuff as sustainable cementitious materials for cement blending. In: Proc. 4th West Africa Built Environment Research (WABER) Conference.
14. Evaluation and improvement of pozzolanic activity of andesite for its use in eco-efficient cement10.1016/j.conbuildmat.2013.06.013 ↗
15. Experimental study on the use of trass as a supplementary cementitious material in pervious concrete
16. Evaluation of perlite powder performance in concrete to replace part of the cement
17. Use of perlite powder to suppress the alkali–silica reaction10.1016/j.cemconres.2004.10.029 ↗
18. Use of perlite as a pozzolanic addition in producing blended cements10.1016/j.cemconcomp.2006.07.018 ↗
19. Utilization of waste expanded perlite as new effective supplementary cementitious material10.1016/j.jclepro.2016.10.018 ↗
20. 232, A.C. Use of Raw or Processed Natural Pozzolans in Concrete. 2001. American Concrete Institute.
21. Pozzolan obtained by mechanochemical and thermal treatments of kaolin10.1016/j.clay.2009.09.008 ↗
22. Effects of calcined perlite powder as a SCM on the strength and permeability of concrete10.1016/j.conbuildmat.2014.05.086 ↗
23. Pozzolanic reaction in the presence of chemical activators: Part II—Reaction products and mechanism10.1016/S0008-8846(00)00214-3 ↗
24. Selected identification methods
25. Mechanical activation of natural acidic igneous rocks for use in cement10.1016/j.minpro.2014.12.001 ↗
26. The effect of particle size distribution on the properties of blended cements incorporating GGBFS and natural pozzolan (NP)10.1016/j.powtec.2007.03.033 ↗
27. Effects of thermal and mechanical activation methods on compressive strength of ordinary Portland cement–slag mortar10.1016/j.matdes.2010.08.038 ↗
28. Mechanical activation of cement with addition of fly ash10.1016/S0167-577X(98)00226-2 ↗
29. Comparison of different methods for enhancing reactivity of pozzolans10.1016/S0008-8846(01)00481-1 ↗
30. Milling as a pretreatment method for increasing the reactivity of natural zeolites for use as supplementary cementitious materials10.1016/j.cemconcomp.2015.09.008 ↗
31. Effects of milling Al (OH) 3 prior to mix with Ca (OH) 2 for a rapid cement hardener10.1016/S0032-5910(00)00381-8 ↗
32. Clays and clay minerals: geological origin, mechanical properties and industrial applications
33. Mechanochemistry of zeolites: Part 3. Amorphization of zeolite ZSM-5 by ball milling10.1016/0144-2449(94)00018-N ↗
34. Optimized experimental design for natural clinoptilolite zeolite ball milling to produce nano powders10.1016/j.powtec.2010.05.034 ↗
35. Effect of high-energy ball milling on the structural stability, surface and catalytic properties of small-, medium-and large-pore zeolites10.1016/0927-6513(95)00050-J ↗
36. Zeolite ball milling as a means of enhancing the selectivity for base catalyzed reactions10.1016/S0926-860X(96)00234-7 ↗
37. Burris, L.E., 2014. Increasing the reactivity of natural zeolites used as supplementary cementitious materials.
38. Ball motion, axial segregation and power consumption in a full scale two chamber cement mill10.1016/j.mineng.2009.02.005 ↗
39. An investigation on mechanical and durability properties of mortars containing nano and micro RHA10.1016/j.conbuildmat.2016.12.017 ↗
40. Self-compacting concrete10.3151/jact.1.5 ↗
41. Khurana · 2001 · 199
42. Effect of steam curing cycles on strength and durability of SCC: A case study in precast concrete10.1016/j.conbuildmat.2013.08.040 ↗
43. EFNARC · 2002
44. Pilvar, A., et al., 2016 Assessment of four electrical measurement methods for assessing the chloride resistance of concretes. In: Second International Conference on Concrete Sustainability, Spain.10.1007/s40996-016-0031-2 ↗
45. Engineers · 1992
46. Alyhya · 2016
47. ASTM C1610 · 2010
48. 238.1R-08, A. · 2008
49. Repeatability, responsiveness and relative cost analysis of SCC workability test methods10.1617/s11527-011-9818-6 ↗
50. Effect of controlled environmental conditions on mechanical, microstructural and durability properties of cement mortar10.1016/j.conbuildmat.2017.12.206 ↗
51. Effects of pre-soaked super absorbent polymers on fresh and hardened properties of self-consolidating lightweight concrete10.1016/j.conbuildmat.2016.03.010 ↗
52. Practical evaluation of rapid tests for assessing the Chloride resistance of concretes containing silica fume10.12989/cac.2016.18.6.793 ↗
53. Use of natural zeolite as a supplementary cementitious material10.1016/j.cemconcomp.2009.10.006 ↗
54. 480-5, B.E., 2005. Admixtures for Concrete, Mortar and Grout. Test Methods. Determination of Capillary Absorption. ISBN: 0 580 47269 8.
55. Build · 1999 · 492
56. Mechanical and durability properties of self consolidating high performance concrete incorporating natural zeolite, silica fume and fly ash10.1016/j.conbuildmat.2013.02.069 ↗
57. EFNARC · 2005
58. Effect of water/cement ratio on the fresh and hardened properties of self-compacting concrete10.1016/j.buildenv.2006.01.012 ↗
59. Investigation on blocking of self-compacting concrete with different maximum aggregate size and use of viscosity agent instead of filler
60. Behaviour of self compacting concrete using Portland pozzolana cement with different levels of fly ash10.1016/j.matdes.2012.11.015 ↗
61. Effects of expanded perlite aggregate and different curing conditions on the physical and mechanical properties of self-compacting concrete10.1016/j.buildenv.2006.06.002 ↗
62. Effect of waste marble dust content as filler on properties of self-compacting concrete10.1016/j.conbuildmat.2008.09.007 ↗
63. Effects of supplementary cementitious materials on mechanical and durability properties of high-performance non-shrinking grout (HPNSG)
64. Rebar corrosion in cracked RC prisms located in harsh marine environment10.1680/macr.14.00055 ↗
65. Influence of parameters on surface resistivity of concrete10.1016/j.cemconcomp.2015.06.003 ↗
66. A new approach for application of silica fume in concrete: Wet granulation10.1016/j.conbuildmat.2017.09.132 ↗