Shear rheology and microstructure of mining material-bitumen composites as filler replacement in asphalt mastics
Source abstract
Abstract
Abstract Magnetite is a mineral that occurs in many types of igneous rock and can be found in large quantities in fluvial and marine environments. It can also be extracted by reprocessing of existing mine tailings. In this paper, magnetite supplied from two different mining sites was evaluated as a substitution of natural limestone filler in asphalt mix design. Magnetite and limestone fillers were added to the bitumen according to three filler/bitumen ratios to form composite asphalt mastics. Rheology of the mixes was analysed to study the effects of magnetite as potential filler in asphalt pavement applications and comparisons were made with natural limestone filler-based mastics. In addition, particle size analysis, scanning electron microscope, Cryo-SEM and energy dispersive X-ray spectroscopy, were conducted to comprehensively characterize the composite mixes. Results showed that the addition of magnetite-based ferromagnetic filler in asphalt mix design represents a suitable way to recycle this material, which is available in large quantities in many countries. In addition, ferromagnetic particles could also be exploited for induction or microwave healing of asphalt cracks as demonstrated by recent studies. Viscoelastic properties of the bituminous mastic are improved by reducing the mastic’s temperature and loading time susceptibility; stiffness and elastic behaviour at high temperature was also improved hence potentially increasing resistance to permanent deformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. Effect of mineral fillers adsorbtion on rheological and chemical properties of asphalt binder10.1016/j.conbuildmat.2017.02.051 ↗
2. Analysis of current safety situation of metal and non-metal tailing pond
3. Utilisation of magnetite tailings as aggregates in asphalt mixtures10.1016/j.conbuildmat.2016.03.139 ↗
4. Recycling of waste tyre rubber in asphalt and portland cement concrete: an overview10.1016/j.conbuildmat.2013.11.027 ↗
5. Properties of capsules containing rejuvenators for their use in asphalt concrete10.1016/j.fuel.2010.09.033 ↗
6. Induction heating of electrically conductive porous asphalt concrete10.1016/j.conbuildmat.2009.12.019 ↗
7. Experimental study on the use of rejuvenators and plastomeric polymers for improving durability of high RAP content asphalt mixtures10.1016/j.conbuildmat.2017.08.013 ↗
8. Performance evaluation of utilization of waste polyethylene terephthalate (PET) in stone mastic asphalt10.1016/j.conbuildmat.2012.06.015 ↗
9. Evaluation of plastic-rubber asphalt: engineering property and environmental concern10.1016/j.conbuildmat.2014.08.075 ↗
10. Use of scrap tire rubber in place of SBS in modified asphalt as an environmentally correct alternative for Brazil10.1016/j.jclepro.2012.03.039 ↗
11. Abukettala, M. Use of Recycled Materials in Road Construction, in: Proceedings of the 2nd International Conference on Civil, Structural and Transportation Engineering (ICCSTE’16) (138), 2016.
12. Use of glass waste as mineral filler in hot mix asphalt
13. Effect of mixing time and temperature on cracking resistance of bituminous mixtures containing reclaimed asphalt pavement material
14. Research on character of asbestos tailing using as asphalt mixture aggregate
15. Effect of coal waste powder in hot mix asphalt compared to conventional fillers: mix mechanical properties and environmental impacts10.1016/j.jclepro.2014.11.078 ↗
16. Evaluation of rutting potential and skid resistance of hot mix asphalt incorporating electric arc furnace steel slag and copper mine tailing
17. Magnetic iron ore using as microwave absorbing materials for deicing of asphalt pavement
18. Laboratory investigation on deicing characteristics of asphalt mixtures using magnetite aggregate as microwave-absorbing materials10.1016/j.conbuildmat.2016.07.137 ↗
19. Utilization of recycled brick powder as alternative filler in asphalt mixture10.1016/j.conbuildmat.2010.08.005 ↗
20. Effects of steel slag fillers on the rheological properties of asphalt mastic10.1016/j.conbuildmat.2017.04.034 ↗
21. Experimental evaluation of dense asphalt concrete properties for induction heating purposes10.1016/j.conbuildmat.2013.04.030 ↗
22. R. Cominsky, G. Huber, T. Kennedy, M. Anderson, SHRP-A-407, The Superpave Mix Design Manual For New Construction and Overlays, 1994.
23. Effects of filler on low temperature physcal hardening of bitumen
24. G. Airey, M. Liao, N. Thom, Fatigue behaviour of bitumen-filler mastics, in: 10th International Conference on Asphalt Pavements, 2006.
25. Effect of mineral filler characteristics on asphalt mastic and mixture rutting potential
26. Effect of mineral fillers on fatigue resistance and fundamental material characteristics-mechanistic evaluation
27. The structure og mineral fillers and their stiffening properties in filler-bitumen mastics10.1617/s11527-007-9283-4 ↗
28. Effect of the chemical composition of fillers in the filler-bitumen interaction10.1016/j.conbuildmat.2015.12.042 ↗
29. AASHTO T 49 · 2015
30. AASHTO T 53 · 2013
31. AASHTO T 315 · 2012
32. Australian Standards AS 2008, Bitumen for pavements, 2013
33. Use of black diagrams to identify inconsistencies in rheological data
34. A structure related model to describe bitumen linear viscoelasticity10.1122/1.550764 ↗
35. J. Planche, D. Lesueur, M. Hines, G. King, Evaluation of elastomer modified bitumens using SHTP binder specifications, Eurasphalt Eurobitume congress E&E.5.121, Strasbourg, 1996.
36. Viscoelastic behavior and analysis of composite materials
37. Effect of filler nature and content on the bituminous mastic behaviour under cyclic loads10.1016/j.conbuildmat.2016.11.114 ↗
38. Laboratory investigation on volume proportioning scheme of mineral fillers in asphalt mixture10.1016/j.conbuildmat.2014.07.012 ↗
39. Potential of recycled fine aggregates powder as filler in asphalt mixture10.1016/j.conbuildmat.2011.04.022 ↗
40. Evaluation of andesite waste as mineral filler in asphaltic concrete mixture10.1016/j.conbuildmat.2011.12.093 ↗
41. A.F. Faheem, C. Hintz, H. Bahia, I.L. Al-Qadi, Influence of filler fractional voids on mastic and mixture performance. Transportation Research Record: Journal of the Transportation Research Board, No. 4264, p. 74–80. Transportation Research Board of the National Academies, Washington, D.C. 2012. doi: 10.3141/2294-08.10.3141/2294-08 ↗
42. H. Bahia, University of Wisconsin Madison. Test Methods and Specification Criteria for Mineral Filler used in HMA, NCHRP Project 9-45, 2010. doi: 10.17226/22871.10.17226/22871 ↗
43. Utilization of recycled brick powder as alternative filler in asphalt mixture10.1016/j.conbuildmat.2010.08.005 ↗
44. A study on the engineering characteristics of asphalt concrete using filler with recycled waste lime10.1016/j.wasman.2006.11.011 ↗
45. H.U. Bahia, D.A. Anderson, Glass transition behavior and physical hardening of asphalt binders, in: Proceedings, Association of Asphalt Paving Technologists, Vol. 62, pp. 93–129, 1993.
46. Mix design of polymer-modified and fiber-reinforced warm-mix asphalts with high amount of reclaimed asphalt pavement: Achieving sustainable and high-performing pavements10.3141/2523-01 ↗