journal article·2018-08

Numerical analysis of shrinkage of steel fiber reinforced high-strength concrete subjected to thermal loading

Farid Bouziadi, Bensaid Boulekbache, Abdelkader Haddi, Chafika Djelal, Mostefa Hamrat

Publisher page

Abstract

Abstract In this study, a numerical investigation is conducted to simulate the total shrinkage strain of High-Strength Concrete (HSC) and Steel Fiber Reinforced High-Strength concrete (SFRHSC) by means of the transient thermal-stress analysis. The ANSYS finite element software has been used in order to evaluate the shrinkage by taking into account both the thermal and mechanical properties of the concrete. These properties are calculated using the maturity concept and the two-phase serial model. The experimental work was carried out to assess the influence of the external temperatures, steel fibers (SF) and their volume fraction on the total shrinkage strain of the SFRHSC which has been exposed to isothermal temperature of 20, 35 and 50 °C. Two dosages of 0.5% and 1% for the SF with aspect ratio of 55 have been considered. The main results obtained from the FE analysis show a good agreement with the founded experimental results under different thermal conditions. According to the obtained numerical results, an increase of the dosage of fibers will reduce the total shrinkage strain. Additionally, the curing temperature raises significantly the evolution of the total shrinkage strain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Fire effects on concrete materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (65)

Show source-provided references
1. Autogenous shrinkage in high-performance cement paste: an evaluation of basic mechanisms10.1016/S0008-8846(02)00890-6 ↗
2. High performance concrete containing lower slag amount: a complex view of mechanical and durability properties10.1016/j.conbuildmat.2008.11.018 ↗
3. Autogenous shrinkage of high performance concrete containing mineral admixtures under different curing temperatures10.1016/j.conbuildmat.2014.03.023 ↗
4. Shrinkage of plain and silica fume cement concrete under hot weather10.1016/j.cemconcomp.2007.05.006 ↗
5. Autogenous relative humidity change and autogenous shrinkage of high-performance cement pastes10.1016/j.cemconres.2004.06.028 ↗
6. Tensile creep and cracking resistance of concrete with different water-to-cement ratios at early age10.1016/j.conbuildmat.2017.04.056 ↗
7. Influence of curing temperature on autogenous shrinkage and cracking resistance of high-performance concrete at an early age10.1016/j.conbuildmat.2015.11.039 ↗
8. P.C. Aitcin, Béton Haute Performance, Ed. Eyrolles, Paris, 2001.
9. Temperature dependence of autogenous shrinkage of silica fume cement pastes with a very low water–binder ratio10.1016/j.cemconres.2013.03.017 ↗
10. Effect of curing temperature and type of cement on early-age shrinkage of high-performance concrete10.1016/S0008-8846(01)00601-9 ↗
11. Autogenous deformations of cement pastes: Part I. Temperature effects at early age and micro–macro correlations10.1016/j.cemconres.2004.10.019 ↗
12. A new approach to determine autogenous shrinkage of mortar at an early age considering temperature history10.1016/S0008-8846(00)00241-6 ↗
13. On the measurement of free deformation of early age cement paste and concrete10.1016/S0958-9465(03)00065-9 ↗
14. Estimation of temperature effects on autogenous shrinkage of concrete by a new prediction model10.1016/j.conbuildmat.2012.03.005 ↗
15. Autogenous deformations of cement pastes: Part II. W/C effects, micro–macro correlations, and threshold values10.1016/j.cemconres.2004.10.020 ↗
16. Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age10.1016/j.conbuildmat.2015.08.093 ↗
17. Simulation of the thermal stress in mass concrete using a thermal stress measuring device10.1016/j.cemconres.2008.12.008 ↗
18. Effects of elevated temperatures on properties of concrete containing ground granulated blast furnace slag as cementitious material10.1016/j.conbuildmat.2012.04.103 ↗
19. Can the maturity concept be used to separate the autogenous shrinkage and thermal deformation of a cement paste at early age?10.1016/S0008-8846(02)00800-1 ↗
20. Stresses in concrete pavements computed by theoretical analysis
21. Thermal stress analysis of jointed plane in concrete pavements10.1016/j.applthermaleng.2014.09.006 ↗
22. The influence of temperature on autogenous volume changes in cementitious materials containing shrinkage reducing admixtures10.1016/j.cemconcomp.2012.04.003 ↗
23. Determination of apparent activation energy of concrete by isothermal calorimetry10.1016/S0008-8846(99)00250-1 ↗
24. Influence of temperature on autogenous deformation and relative humidity change in hardening cement paste10.1016/S0008-8846(99)00021-6 ↗
25. Effect of constituents and curing condition on autogenous shrinkage of concrete
26. Autogenous shrinkage of concrete containing granulated blast-furnace slag10.1016/j.cemconres.2006.01.005 ↗
27. EN-1992, Eurocode 2: design of concrete structures: Part 1–1: general rules and rules for buildings, Brussels, 2001, 230 p.
28. An engineering model for creep and shrinkage in HPC
29. Numerical analysis of the thermal active restrained shrinkage ring test to study the early age behavior of massive concrete structures10.1016/j.engstruct.2010.12.044 ↗
30. ACI 209 2R-08, Guide for Modeling and Calculating Shrinkage and Creep in Hardened Concrete: American Concrete Institute, 2008.
31. Finite-element modeling of deformation and cracking in early-age concrete
32. Estimation of cracking risk of concrete at early age based on thermal stress analysis10.1007/s10973-011-1512-y ↗
33. Mesoscale model for thermal conductivity of concrete10.1016/j.conbuildmat.2015.08.106 ↗
34. Theoretical and experimental study on multi-phase model of thermal conductivity for fiber reinforced concrete10.1016/j.conbuildmat.2017.05.043 ↗
35. Effect of temperature and aging on the mechanical proprieties of concrete: Part. II Prediction model10.1016/S0008-8846(02)00745-7 ↗
36. Performances of cementitious mortars containing recycled synthetic fibres under hot-dry climate
37. High strength characteristics of cement mortar reinforced with hybrid fibers10.1016/j.conbuildmat.2010.11.008 ↗
38. Effect of the addition of synthetic fibers to concrete thin slabs on plastic shrinkage cracking10.1016/j.conbuildmat.2010.04.041 ↗
39. Comparative study between natural and PVA fibers to reduce plastic shrinkage cracking in cement-based composite10.1016/j.conbuildmat.2015.05.028 ↗
40. Influence of polypropylene fiber geometry on plastic shrinkage cracking in concrete10.1016/j.cemconres.2006.01.010 ↗
41. A quantitative study on the plastic shrinkage cracking in high strength hybrid fibre reinforced concrete10.1016/j.cemconcomp.2007.03.005 ↗
42. Van Breugel · 1991
43. Quantitative study of hydration of C3S and C2S by thermal analysis10.1007/s10973-010-0816-7 ↗
44. Degree of hydration-based creep modeling of concrete with blended binders: from concept to real applications
45. Maturity method: from theory to application
46. Compressive strength for mortar containing natural pozzolan under various curing temperature10.1016/j.cemconcomp.2007.03.002 ↗
47. The mathematical incorrectness of the integral isoconversional methods in case of variable activation energy and the consequences10.1007/s10973-013-3459-7 ↗
48. Estimation of compressive strength by a new apparent activation energy function10.1016/S0008-8846(00)00481-6 ↗
49. Cracking risks associated with early age shrinkage10.1016/S0958-9465(03)00068-4 ↗
50. Mohammadi · 2015 · 123
51. Pillai, Prediction of response of reinforced concrete frames exposed to fire
52. fib Model Code for Concrete Structures 2010, Ernst & Sohn publishing company, Lausanne, 2013.10.1002/9783433604090 ↗
53. J.M. Gere. Mechanics of Materials. Sixth edition Brooks/Cole–Thomson Learning 10 Davis Drive. Belmont, CA 94002, USA 2004.
54. Thermomechanical response of LNG concrete tank to cryogenic temperature10.1007/s11223-011-9323-8 ↗
55. Prediction of the failure time of glass fiber reinforced plastic reinforced concrete beams under fire conditions10.1061/(ASCE)1090-0268(2005)9:5(450) ↗
56. Lienhard · 2008
57. P. Kohnke, ANSYS Theory and reference release 5.6. 275 Technology drive Canonsburg, 1999.
58. Creep and shrinkage behaviour of CFRP-reinforced mortar10.1016/j.conbuildmat.2011.07.048 ↗
59. D. Kachlakev, T. Miller, S. Yim, Finite element modeling of reinforced concrete structures strengthened with frp laminates, Technical Report For Oregon Department of Transportation Research Group, Washington DC, 2001.
60. ANSYS Mechanical User's Guide, ANSYS, Inc., Release 15.0, October 2013.
61. Flowability of fiber reinforced concrete and its effect on the mechanical properties of the material10.1016/j.conbuildmat.2010.02.025 ↗
62. The effects of fibers on the shrinkage of high- strength concrete under various curing temperatures10.1016/j.conbuildmat.2016.03.164 ↗
63. Tensile creep due to restraining stresses in high-strength concrete at an early ages10.1016/j.cemconres.2005.11.017 ↗
64. Early age stability of concrete pavement by using hybrid fiber together with MgO expansion agent in high altitude locality10.1016/j.conbuildmat.2013.07.089 ↗
65. Numerical analysis of thermal stress-deformation in concrete surrounding FRP bars in hot region10.1016/j.conbuildmat.2012.08.047 ↗