Experimental study on thermal performance of bamboo scrimber at elevated temperatures
Source abstract
Abstract
Abstract To understand the thermal performance of bamboo scrimber at elevated temperatures, its specific heat, density ratio and conductivity were measured using TGA-DSC and Hot Disk. With temperature increasing from 20 °C to 100 °C, the specific heat and conductivity of bamboo increase gradually. The density ratio decreases to about 0.25 at 500 °C and stays constant until 900 °C. The conductivity of bamboo scrimber parallel to grain is 1.26–1.63 times the conductivity perpendicular to grain. Due to the high density and content of phenolic resin, the conductivity of bamboo scrimber is higher than those of glued laminated timber and timbers in Eurocode 5 and the literature. Charring models of bamboo scrimber parallel to grain and perpendicular to grain exposed to one-sided fire were simulated and compared with experimental results. The relative difference in charring depth is less than 10%. A 3D finite element model of bamboo scrimber beams exposed to four-sided fire was established based on the measured thermal parameters. The results indicate that the measured specific heat, density ratio and conductivity of bamboo scrimber have good accuracy and are suitable for numerical simulation. Therefore, the reliable thermal parameter data can be used in fire resistance analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Bamboo properties and applications · Wood Treatment and Properties · Natural Fiber Reinforced Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Engineered bamboo for structural applications10.1016/j.conbuildmat.2015.01.077 ↗
2. Experimental and analytical study on the nonlinear bending of parallel strand bamboo beams
3. Experimental study on compressive and tensile properties of a bamboo scrimber at elevated temperatures10.1016/j.conbuildmat.2017.06.128 ↗
4. Combustion performance of engineered bamboo from cone calorimeter tests10.1007/s00107-016-1074-6 ↗
5. Assessment of fire reaction and fire resistance of Guadua angustifolia kunth bamboo10.1016/j.conbuildmat.2011.08.028 ↗
6. Fire simulation test and analysis of laminated bamboo frame building10.1016/j.conbuildmat.2012.02.077 ↗
7. Lie · 1992
8. Thermal properties of lightweight-framed construction components at elevated temperatures10.1002/fam.880 ↗
9. Modelling of heat and mass transfer in timber structures during fire10.1016/0379-7112(93)90011-E ↗
10. Knudson, R.M. Performance of structural wood members exposed to fire. Ph.D. Thesis, University of California, Berkeley, USA, 1973.
11. Janssens · 1994 · 607
12. Transient plane source (TPS) technique for measuring thermal properties of building materials10.1002/fam.810190107 ↗
13. Thermal conductivity measurements on wood materials with transient plane source technique10.1016/j.tca.2014.11.021 ↗
14. Charring rate of wood for ASTM E 119 exposure
15. The European Standard EN 1995-1-2: 2004(E), Eurocode 5: Design of Timber Structures-Part 1-2: General. Structural fire design, 2004.
16. Using the TPS method for determining the thermal properties of concrete and wood at elevated temperature10.1002/fam.915 ↗
17. Thermal conductivity of engineered bamboo composites10.1007/s10853-015-9610-z ↗
18. Modeling of the thermal degradation of structural wood members exposed to fire10.1002/fam.848 ↗
19. Specific heat and thermal conductivity of softwood bark and softwood char particles10.1016/S0016-2361(02)00398-8 ↗
20. Thomas, G.C. Fire resistance of light timber framed walls and floors. Ph.D. Thesis, School of Engineering, University of Canterbury, New Zealand, 1997.
21. Specific heat capacity measurement of Phyllostachys edulis, (Moso bamboo) by differential scanning calorimetry10.1016/j.conbuildmat.2016.08.103 ↗
22. A model for predicting heat transfer through gypsum board/wood stud walls exposed to fire10.1002/fam.810180505 ↗
23. Effective thermal actions and thermal properties of timber members in natural fires10.1002/fam.898 ↗
24. American Society for Testing and Materials, Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry. ASTM E 1269-11, 2011.
25. ISO834-1, Fire Resistance Tests-Elements of Building Construction-Part 1: General Requirements, International Organization for Standardization, Geneva, 1999.
26. Firing mechanism of oxide-carbon refractories with phenolic resin binder10.1016/j.ceramint.2017.12.206 ↗
27. Finite element analysis of heat transfer through timber elements exposed to fire10.1016/j.engstruct.2017.04.014 ↗
28. The charring rate and charring depth of bamboo scrimber exposed to a standard fire