Research on signal processing of segment-grout defect in tunnel based on impact-echo method
Source abstract
Abstract
Abstract In shield tunneling construction, grout of precast concrete segments is widely applied to various geological conditions. However, the connection performance between the grout and segments after the grout cannot be determined by destructive means, such as coring. The impact-echo method is used extensively in nondestructive testing of civil engineering structures. Nevertheless, there are inadequate researches on determining defects in segment-grout structure. In this paper, the segment-grout structure was simulated experimentally and artificial defects were introduced in the grout. The Short-time Fourier Transform (STFT) and Wavelet Transform (WT) of signals obtained by the impact-echo method were carried out to analyze the time-frequency domain features of the impact-echo signals with and without defects in the grout. On this basis, defects in the grout layer were determined. Finally, energies of wavelet packet were calculated and characteristic relative energy indexes of wavelet packet at different positions were detained. It’s found that the values at positions without defects are relatively low. It’s demonstrated that the signal analysis of impact-echo method has to combine time-frequency domain information and energy distribution for detection of defects in the grout layer. Wavelet transform and energy analysis methods are effective means to detect defects in the grout layer.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Geophysical Methods and Applications · Ultrasonics and Acoustic Wave Propagation · Rock Mechanics and Modeling
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Detecting delaminations in concrete slabs with and without overlays using the impact-echo method
2. The impact-echo response of concrete plates containing delaminations: numerical, experimental and field studies10.1007/BF02472949 ↗
3. Guided-wave approach for spectral peaks characterization of impact-echo tests in layered systems10.1061/(ASCE)IS.1943-555X.0000359 ↗
4. Finite element studies of the impact-echo response of plates containing thin layers and voids10.1007/BF00566980 ↗
5. Evaluation of resonant frequencies of solid circular rods with impact-echo method10.1007/s10921-010-0070-8 ↗
6. The effective near-surface defect identification by dynamic behavior associated with both impact-echo and flexural modes for concrete structures
7. Experimental and numerical studies on nondestructive evaluation of grout quality in tendon ducts using impact-echo method10.1061/(ASCE)BE.1943-5592.0000759 ↗
8. Recognition of rebars and cracks based on impact-echo phase analysis10.1016/j.conbuildmat.2017.02.102 ↗
9. Phase spectrogram and frequency spectrogram as new diagnostic tools10.1016/j.ymssp.2005.08.011 ↗
10. Inspection, evaluation and repair monitoring of cracked concrete floor using NDT methods10.1016/j.conbuildmat.2013.06.082 ↗
11. On the evaluation of interface quality in concrete repair system by means of impact-echo signal analysis10.1016/j.conbuildmat.2016.12.064 ↗
12. Impact-echo method for the deterioration evaluation of near-surface mounted CFRP strengthening under outdoor exposure conditions10.1617/s11527-016-0944-z ↗
13. Time-frequency analysis of impact_echo signals: numerical modelling and experimental validation
14. Time-frequency techniques for the impact-echo data analysis and interpretations
15. D. Algernon, H. Wiggenhauser. Anwendung der hilbert-huang transformation zur auswertung von impact-echo datensdtzen, Proceedings of German Society for Non-Destructive Testing Annual Convention (DGZfP Jahrestagung), pp. 1–13, Rostock, 2005.
16. Application of the wavelet transform and the enhanced Fourier spectrum in the impact echo test10.1016/j.ndteint.2008.01.002 ↗
17. Concrete condition assessment using impact-echo method and extreme learning machines10.3390/s16040447 ↗
18. Bonding state evaluation of tunnel shotcrete applied onto hard rocks using the impact-echo method10.1016/j.ndteint.2009.02.007 ↗
19. Numerical study on the evaluation of tunnel shotcrete using the Impact-Echo method coupled with Fourier transform and short-time Fourier transform10.1016/j.ijrmms.2010.09.005 ↗
20. Evaluation of grout in tunnel lining using impact-echo
21. Detection of cavities around concrete sewage pipelines using impact-echo method
22. M. Sansalone, N.J. Carino. Impact-echo: a methods for flaw detection in concrete using transient stress waves[M]. NBS IR 86-3452, U.S. Department of Commerce, 1986.10.6028/NBS.IR.86-3452 ↗
23. Lamb wave basis for impact-echo method analysis
24. Research and numerical simulation on grouting quality of shield tunnel based on impact echo method
25. J.C. Santamarina, D. Fratta. Discrete Signals and Inverse Problems: An Introduction for Engineers and Scientists[J]. Scitech Book News, 2005.10.1002/0470021896 ↗
26. The wavelet transform, time-frequency localization and signal analysis
27. Ten lectures on wavelets
28. Time–frequency techniques for the impact-echo data analysis and interpretations[C]
29. Improving signal processing of the impact-echo method using continuous wavelet transform[C]