journal article·2018-11

Residual mechanical behavior of (SD 500) hot rolled TMT reinforcing steel bars after elevated temperatures

Faraz Tariq, Pradeep Bhargava

Publisher page

Abstract

Abstract This paper intends to present an experimental investigation carried out to study the influence of elevated temperatures on residual mechanical properties of super ductile (SD 500) hot rolled deformed TMT bars in comparison with conventional hot rolled and ordinary TMT steel bars. The study also presents a detailed analysis of effect of heating on residual ductility characteristics of SD 500 rebars after exposure to various temperatures using various prevalent methods in the available literature. The experimental study involved heated residual tensile tests carried out on rebar specimens after being exposed to elevated temperatures and subsequently cooling down to ambient conditions covering a wide range of available sizes (8 mm, 10 mm, 12 mm, 16 mm and 20 mm). A detailed description of the test results, observations and discussion on results obtained from the testing, including comparisons with the available information in the existing relevant literature have been presented with particular emphasis on the influence of high temperature on ductility of super ductile (SD 500) hot rolled TMT bars. The results so obtained suggest better performance of SD TMT over ordinary TMT and conventional hot rolled rebars in terms of key aspects of mechanical behavior after exposure to elevated temperatures. The outcomes of this study have direct implications on procedures used for predicting the ultimate behavior of structural elements during and following exposure to elevated temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. Mechanical properties of heat-treated high strength steel under fire/post-fire conditions10.1016/j.jcsr.2014.02.003 ↗
2. How did the WTC towers collapse: a new theory10.1016/S0379-7112(03)00069-9 ↗
3. Experimental evaluation of the mechanical properties of steel reinforcement at elevated temperature10.1016/j.firesaf.2009.05.004 ↗
4. Residual behavior of steel rebars and R/C sections after a fire10.1016/j.conbuildmat.2009.06.050 ↗
5. Mechanical properties of reinforcing and prestressing steels after heating10.1061/(ASCE)0899-1561(1996)8:4(189) ↗
6. Properties of reinforced concrete steel rebars exposed to high temperatures
7. Effect of temperature on strength and elastic modulus of high-strength steel10.1061/(ASCE)MT.1943-5533.0000600 ↗
8. Fire resistance of reinforced concrete columns with L-, T-, and +-shaped cross-sections10.1016/j.firesaf.2009.04.002 ↗
9. An introduction to the mechanical properties of structural steel at elevated temperatures10.1016/0379-7112(88)90032-X ↗
10. Post-fire mechanical properties of high strength structural steels S460 and S69010.1016/j.engstruct.2011.11.005 ↗
11. Mechanical properties of ASTM A 992 steel after fire
12. Mechanical properties of reinforcing bars after exposure to elevated temperatures or fire
13. Experimental research on material properties of HRBF 500 after high temperature
14. Dependence of mechanical properties of high strength steel S690 on elevated temperatures10.1016/j.conbuildmat.2011.12.018 ↗
15. The reinstatement of fire damaged steel framed structures10.1016/0379-7112(81)90004-7 ↗
16. Properties of reinforced concrete steel rebars exposed to high temperatures10.1155/2008/814137 ↗
17. Buchanan · 2016
18. Committee · 1995
19. Residual properties of TMT steel bars after exposure to elevated temperatures10.1061/(ASCE)MT.1943-5533.0001350 ↗
20. Stress-strain curves of structural and reinforcing steels after exposure to elevated temperatures10.1061/(ASCE)MT.1943-5533.0000676 ↗
21. Code · 2007
22. Bond and splitting in reinforced concrete: test results on bar pull-out10.1007/BF02486361 ↗
23. BIS · 2008
24. Behaviour of concrete floor slabs at ambient and elevated temperatures10.1016/j.firesaf.2006.11.009 ↗
25. BIS · 1985
26. Kakani · 2006
27. CEB-FIP · 1993
28. A new proposal for defining the ductility of concrete-reinforcement steels by means of a single parameter10.1007/BF02485990 ↗
29. Ductility in reinforced concrete: why is it needed and how is it achieved?