journal article·2018-12

Characterization of alkali bonded expanded perlite

Elettra Papa, Valentina Medri, Annalisa Natali Murri, Luca Laghi, Giulia De Aloysio, Simone Bandini, Elena Landi

Publisher page

Abstract

Abstract The thermal and mechanical properties of a lightweight alkali bonded material were investigated in correlation with the microstructure and porosity. The material was produced using fine granules of expanded perlite as raw powder and potassium di-silicate aqueous solution as alkaline activator, instead of the commonly used sodium silicate, to improve thermal performances. After consolidation, the material was subjected to microstructural analyses, as well as to thermo-physical and mechanical tests. Density was 467 ± 40 kg·m−3, the total porosity 80 vol%, the average pore size 0.2 µm and compressive strength was 1.5 ± 0.5 MPa. It was observed that, besides the action of potassium di-silicate as an alkali binder, expanded perlite granules reacted on the surface forming geopolymer nano-precipitates. Laser Flash Method was employed to evaluate the whole thermal behavior within the temperature range 25–550 °C: thermal conductivity was 0.084 m−1K−1 at 25 °C and 0.121 W·m−1K−1 at 550 °C. At high temperature, the thermal conductivity resulted similar or even lower when compared with commercial perlite – sodium silicate materials with lower densities in the range 180–260 kg/m3. Results show that lightweight alkali bonded expanded perlite materials can be produced with improved thermal properties by exploiting potassium silicate and overcoming the poor temperature resistance of organic binders.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Advanced ceramic materials synthesis · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A synopsis about perlite as building material - a best practice guide for Civil Engineer10.1016/j.conbuildmat.2016.06.001 ↗
2. Expanded perlite aggregate characterization for use as a lightweight construction raw material
3. Industrial mineralogy: mineral processing, beneficiations and other related mineral usage
4. Perlite-based building materials — a review of current applications10.1016/0950-0618(91)90004-5 ↗
5. No sign of the bubble bursting – perlite uses and markets
6. Impact response of lightweight mortars containing expanded perlite10.1016/j.cemconcomp.2012.10.004 ↗
7. A new consolidation process for expanded perlite particles10.1016/j.conbuildmat.2014.02.041 ↗
8. Investigation on characteristic properties of potassium borate and sodium borate blended perlite bricks10.1016/j.jclepro.2015.04.114 ↗
9. Thermal characteristics of high-strength polymer-cement composites with lightweight aggregates and polypropylene fiber10.1016/j.conbuildmat.2011.03.023 ↗
10. http://www.schundler.com/composites.html/.
11. http://www.smcindustries.com/.
12. http://www.jm.com/en/building-materials/industrial-insulation/.
13. http://www.perfiltra.com/.
14. Perlite waste as a precursor for geopolymer formation
15. Properties of ground perlite geopolymer mortars
16. Thermal insulating foamy geopolymers from perlite10.1016/j.mineng.2010.07.015 ↗
17. Characterization of the properties of perlite geopolymer pastes10.3989/mc.2016.10415 ↗
18. Davidovits · 2008
19. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
20. Microstructure and microchemistry of fully-reacted geopolymers and geopolymer matrix composites
21. Production and characterization of lightweight vermiculite/geopolymer-based panels10.1016/j.matdes.2015.06.145 ↗
22. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
23. Lightweight geopolymer concrete containing aggregate from recycle lightweight block10.1016/j.matdes.2013.06.001 ↗
24. Potential of geopolymer technology towards green buildings and sustainable cities10.1016/j.proeng.2011.11.2108 ↗
25. Production and thermomechanical characterization of wool-geopolymer composites10.1111/jace.14853 ↗
26. ASTM E 1461-13, Standard test method for thermal diffusivity by the flash method.
27. ASTM E 2585-09, Standard practice for thermal diffusivity by the laser flash.
28. Flash method of determining thermal diffusivity, heat capacity, and thermal conductivity10.1063/1.1728417 ↗
29. H. Massard, C.S.C. Pinto, P. Couto, H.R.B. Orlande, R.M. Cotta, Analysis of flash method physical models for the measurement of thermal diffusivity of solid materials, in: Proc. 10° Brazilian Congr. Therm. Sci. Eng. ENCIT 2004 Braz. Soc. Mech. Sci. Eng. ABCM, Nov. 29 - Dec. 03, 2004, n.d.
30. Effect of expanded perlite on the mechanical properties and thermal conductivity of lightweight concrete10.1016/j.enbuild.2010.11.008 ↗
31. Microstructural control on Perlite expansibility and geochemical balance with a novel application of Isocon analysis: an example from Milos Island Perlite (Greece)10.3390/min6030080 ↗
32. Effect of metallic Si addition on polymerization degree of in situ foamed alkali-aluminosilicates10.1016/j.ceramint.2013.02.104 ↗
33. Surface modifications of volcanic glasses (perlites) by water vapor
34. Use of infrared spectroscopy to study geopolymerization of heterogeneous amorphous aluminosilicates10.1021/la026127e ↗
35. Infrared spectroscopy study of structural nature of geopolymeric products10.1007/s11595-007-4522-7 ↗
36. Novel mechanical behaviour of perlite/sodium silicate composites10.1016/j.conbuildmat.2015.05.118 ↗
37. Physical evolution of Na-geopolymer derived from metakaolin up to 1000 ??c10.1007/s10853-006-0535-4 ↗
38. Formation of ceramics from metakaolin-based geopolymers. Part II: K-based geopolymer10.1111/j.1551-2916.2008.02922.x ↗
39. Production and characterization of geopolymers based on mixed compositions of metakaolin and coal ashes10.1016/j.matdes.2013.11.054 ↗
40. Temperature and finite pulse-time effects in the flash method for measuring thermal diffusivity10.1063/1.1729711 ↗
41. Properties of heat-insulating materials (A review)10.1007/s11148-005-0077-3 ↗