journal article·2019-01

Characteristic analysis of acoustic emission signals of masonry specimens under uniaxial compression test

Yanqi Wu, Shengli Li, Dongwei Wang

Publisher page

Abstract

Abstract Damage assessment of masonry buildings in service is the key to structural health monitoring. A uniaxial compression test of brick masonry specimens based on acoustic emission (AE) technology was conducted to monitor and assess the dynamic damage and failure mechanisms of masonry structures under load in real time. The variation characteristics of the ringing counts, energy, and peak frequency of the AE characteristic parameters of the masonry specimens during the entire uniaxial compression process were collected and recorded, and the reference values of the time parameters of AE monitoring were determined. Results showed that the number of AE ringing counts increased sharply and the slope of the cumulative energy curve increased remarkably at the final failure stage of the brick masonry specimens under compression. In addition, the component ratio of the peak frequency in the low-frequency band increased and that of the peak frequency in the high-frequency band decreased. The damage status of the masonry structures could be predicted qualitatively by the AE signals with high energy in the low-frequency band. The ringing counts of the AE sensors at different locations on the masonry specimens were compared, and the rationalities of the position and number of AE sensors fixed on the brick masonry specimens in the uniaxial compression test were discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Rock Mechanics and Modeling · Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Influence of freeze-thaw cycles on mechanical properties of historical brick masonry10.1016/j.conbuildmat.2015.03.077 ↗
2. Application of acoustic emission for masonry arch bridges10.1111/j.1475-1305.2006.00274.x ↗
3. Damage evaluation of three masonry towers by acoustic emission10.1016/j.engstruct.2006.08.008 ↗
4. Application of non-detective techniques in traditional masonry structures10.1007/s12204-013-1399-9 ↗
5. Structural health monitoring of bridges with piezoelectric AE sensors10.1016/j.engfailanal.2015.03.009 ↗
6. Assessment of masonry arch railway bridges using non-destructive in-situ testing methods10.1016/j.engstruct.2009.04.008 ↗
7. Evaluation of the seismic retrofitting of an unreinforced masonry building using numerical modeling and ambient vibration measurements10.1016/j.engstruct.2017.12.016 ↗
8. Structural monitoring and assessment of an ancient masonry tower
9. Assessment of mechanical properties of full-scale masonry panels through sonic methods. Comparison with mechanical destructive tests10.1002/stc.1783 ↗
10. Multi-sensing NDT for damage assessment of concrete masonry walls10.1002/stc.1680 ↗
11. Damage monitoring of an historical masonry building by the acoustic emission technique
12. Influence of damage in the acoustic emission parameters10.1016/j.cemconcomp.2013.08.001 ↗
13. Identification of interface failure mechanisms of metallized glass fibre reinforced composites using acoustic emission analysis10.1016/j.compositesb.2014.06.018 ↗
14. E. Verstrynge, K. Van Balen, M. Wevers, B. Ghiassi, D.V. Oliveira, Detection and Localization of Debonding Damage in Composite-masonry Strengthening Systems with the Acoustic Emission Technique. Emerging Technologies in NDT, 2015, pp. 511–517.10.1201/b19381-84 ↗
15. Laboratory and field studies on the use of acoustic emission for masonry bridges10.1016/j.ndteint.2013.01.006 ↗
16. Fatigue crack propagation monitoring by acoustic emission signal analysis10.1016/j.engfracmech.2011.09.017 ↗
17. An overview on fatigue damage assessment of reinforced concrete structures with the aid of acoustic emission technique10.1016/j.conbuildmat.2016.02.206 ↗
18. Damage analysis of concrete structures by means of acoustic emissions technique10.1016/j.compositesb.2016.10.031 ↗
19. A parallel between earthquake sequences and acoustic emissions released during fracture process in reinforced concrete structures under flexural loading10.1016/j.conbuildmat.2016.03.082 ↗
20. Frequency analysis of acoustic emission signal to monitor damage evolution in masonry structures10.1088/1742-6596/305/1/012134 ↗
21. Numerical models for the assessment of historical masonry structures and materials, monitored by acoustic emission10.3390/app6040102 ↗
22. AE monitoring and numerical simulation of a two-span model masonry arch bridge subjected to pier scour10.1111/j.1475-1305.2010.00752.x ↗
23. Studying the dynamic damage failure of concrete based on acoustic emission10.1016/j.conbuildmat.2017.05.054 ↗
24. Acoustic emission characteristics of semi-rigid bases with three moisture conditions during bending tests
25. Crack growth in masonry: numerical analysis and sensitivity study for discrete and smeared crack modelling10.1016/j.engstruct.2018.03.030 ↗
26. A joint fatigue-creep deterioration model for masonry with acoustic emission based damage assessment10.1016/j.conbuildmat.2013.02.045 ↗
27. Monitoring and predicting masonry’s creep failure with the acoustic emission technique10.1016/j.ndteint.2009.03.001 ↗
28. Verstrynge · 2010 · 217
29. Acoustic emission source location on large plate-like structures using a local triangular sensor array10.1016/j.ymssp.2012.01.012 ↗
30. Acoustic emission location on aluminum alloy structure by using FBG sensors and PSO method10.1080/09500340.2015.1095952 ↗
31. Acoustic source localization in anisotropic plates with Z shaped sensor clusters10.1016/j.ultras.2017.10.007 ↗
32. Optimizing the number of acoustic emission sensors using the bees algorithm for detecting surface fractures10.1016/j.procir.2017.12.227 ↗
33. Study on acoustic emission characteristics of a semirigid base of dense skeleton type during complete uniaxial compression tests
34. Moradian · 2017 · 357
35. Sun · 2010 · 4298
36. Durability evaluation of reinforced masonry by fatigue tests and acoustic emission technique10.1002/stc.1623 ↗
37. Characterization of debonding in FRP-strengthened masonry using the acoustic emission technique10.1016/j.engstruct.2014.01.050 ↗