journal article·2019-02

Numerical simulation and visualization of motion and orientation of steel fibers in UHPC under controlling flow condition

Huanghuang Huang, Xiaojian Gao, Ailian Zhang

Publisher page

Abstract

Abstract To improve fiber orientation in ultra-high performance concrete (UHPC), one L-shape device was developed to control the flow of fresh mixture. A smoothed particle hydrodynamics (SPH) method was used to analyze and simulate the motion of steel fibers in UHPC with flow through this L-shape apparatus. SPH simulation indicated that steel fibers tended to rotate to be parallel with local streamlines and most fibers were aligned in the horizontal channel of this L-shape device, inducing an improvement of fiber orientation in hardened specimens. This modification effect of fiber orientation can be a little strengthened with the decreasing height of the horizontal channel. On the other hand, a colorless, transparent and viscous concentrated suspension was obtained by adding super absorbent polymer (SAP) into water for representing fresh UHPC matrix and the visualization of fiber motion was achieved. This visualization approach, coupled with image analysis of steel fibers in hardened UHPC specimens, well verified the SPH numerical simulation results. Therefore, this type of L-shape apparatus provides a potential method to manually improve the steel fiber orientation in UHPC for better mechanical properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fluid Dynamics Simulations and Interactions · Innovations in Concrete and Construction Materials · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Development of the mechanical properties of an ultra-high performance fiber reinforced concrete (UHPFRC)10.1016/j.cemconres.2006.03.009 ↗
2. The mechanical properties and microstructure of ultra-high-performance concrete containing various supplementary cementitious materials10.1080/21650373.2016.1262798 ↗
3. Composition of reactive powder concretes10.1016/0008-8846(95)00144-2 ↗
4. B.A. Graybeal, Characterization of the behavior of ultra-high performance concrete (Ph.D. thesis), 2005.
5. Reducing environmental impact by increasing the strength of concrete: quantification of the improvement to concrete bridges10.1016/j.jclepro.2012.05.028 ↗
6. Relation between fiber distribution and post-cracking behavior in steel fiber reinforced self-compacting concrete panels10.1016/j.cemconres.2013.04.009 ↗
7. Effects of fiber shape, aspect ratio, and volume fraction on flexural behavior of ultra-high-performance fiber-reinforced cement composites10.1016/j.compstruct.2017.04.069 ↗
8. Improvement effect of steel fiber orientation control on mechanical performance of UHPC10.1016/j.conbuildmat.2018.08.146 ↗
9. Investigation on flexural behavior of UHPCC considering the effect of fiber orientation distribution10.1016/j.conbuildmat.2011.07.003 ↗
10. Influence of fiber orientation on the tensile behavior of ultra-high performance fiber reinforced cementitious composites10.1016/j.cemconres.2017.03.007 ↗
11. Simple tools for fiber orientation predication in industrial practice10.1016/j.cemconres.2011.05.008 ↗
12. On flow properties, fiber distribution, fiber orientation and flexural behavior of FRC10.1617/s11527-007-9229-x ↗
13. Flowability of fiber-reinforced concrete and its effect on the mechanical properties of the material10.1016/j.conbuildmat.2010.02.025 ↗
14. The variation of flow-dependent tensile behavior in radial flow dominant placing of Ultra High Performance Fiber Reinforced Cementitious Composites (UHPFRCC)10.1016/j.conbuildmat.2012.01.006 ↗
15. S.W. Kim, S.T. Kang, J.J. Park, G.S. Ryu, Effect of filling method on fiber orientation and dispersion and mechanical properties of UHPC, in: Proceedings of the 2nd International Symposium on Ultra-high Performance Concrete, Kassel, Germany, 2008.
16. Fiber orientation distribution and tensile mechanical response in UHPFRC
17. Assessment of fiber orientation in ultra high performance fiber reinforced concrete and its effect on flexural strength10.1617/s11527-009-9562-3 ↗
18. On the orientation of fibers in structural members fabricated with self-compacting fiber reinforced concrete10.1016/j.cemconcomp.2011.09.005 ↗
19. Influence of flowability, casting time and formwork geometry on fiber orientation and mechanical properties of UHPFRC10.1016/j.cemconres.2017.02.017 ↗
20. Fiber alignment and property direction dependency of FRC extrudate10.1016/S0008-8846(03)00108-X ↗
21. Portland cement paste with aligned carbon fibers exhibiting exceptionally high flexural strength (> 100 MPa)10.1016/j.cemconres.2016.08.011 ↗
22. Magnetic orientation of steel fibers in self-compacting concrete beams: Effect on failure behavior10.1016/j.cemconcomp.2017.04.005 ↗
23. Aligning steel fibers in cement mortar using electro-magnetic field10.1016/j.conbuildmat.2016.11.081 ↗
24. Smoothed Particle Hydrodynamics: Some recent improvements and applications10.1016/S0045-7825(96)01090-0 ↗
25. SPH for high velocity impact computations10.1016/S0045-7825(96)01089-4 ↗
26. Numerical investigation of Newtonian and non-Newtonian multiphase flows using ISPH method10.1016/j.cma.2012.10.005 ↗
27. Smoothed Particle Hydrodynamics and Its Diverse Applications10.1146/annurev-fluid-120710-101220 ↗
28. Incompressible SPH method for simulating Newtonian and non-Newtonian flows with a free surface10.1016/S0309-1708(03)00030-7 ↗
29. SPH method with applications of oscillating wave surge converter10.1016/j.oceaneng.2018.01.057 ↗
30. Wave interaction with a tethered buoy: SPH simulation and experimental validation10.1016/j.oceaneng.2018.03.001 ↗
31. Simulating free surface flows with SPH10.1006/jcph.1994.1034 ↗
32. Explicit incompressible SPH algorithm for free-surface flow modelling: a comparison with weakly compressible schemes10.1016/j.advwatres.2016.09.008 ↗
33. A comprehensive study on the parameters setting in smoothed particle hydrodynamics (SPH) method applied to hydrodynamics problems10.1016/j.compgeo.2017.07.024 ↗
34. An improved SPH approach for simulating 3D dam-break flows with breaking waves10.1016/j.cma.2016.09.002 ↗
35. Chinese National Institute of Standardization, Common Portland Cement, GB 175-2007, Beijing, 2007.
36. Chinese National Institute of Standardization, Test method for activity of industrial waste slag used as addition to cement, GB/T 12957-2005, Beijing, 2005.
37. Influence of rice husk ash on strength and permeability of ultra-high performance concrete10.1016/j.conbuildmat.2017.05.155 ↗
38. B. Zhou, Y. Uchida, Fiber orientation in ultra high performance fiber reinforced concrete and its visualization, in: Proceedings of 8th International Conference on Fracture Mechanics of Concrete and Concrete Structures (FraMCos-8), Toledo, Spain, 2013.
39. Recycling of raw rice husk to manufacture magnesium oxysulfate cement based lightweight building materials10.1016/j.jclepro.2018.04.238 ↗
40. Influence of rheological properties of cement mortar on steel fiber distribution in UHPC10.1016/j.conbuildmat.2017.03.173 ↗
41. Flows of materials with yield10.1122/1.549926 ↗
42. A.E. Naaman, Toughness, ductility, surface energy and deflection-hardening FRC composites, Proceedings of JCI International Workshop on Ductile Fiber Reinforced Cementitious Composites (DFRCC) – Application and Evaluation (DFRCC-02), Takayama, Japan, 2002.
43. A micromechanical model of tension-softening and bridging toughness of short random fiber reinforced brittle matrix composites10.1016/0022-5096(91)90043-N ↗
44. Distribution of steel fibers in rectangular sections10.1016/j.cemconcomp.2004.03.005 ↗