Influence of cooling rate and additives on low-temperature properties of asphalt mixtures in the TSRST
Source abstract
Abstract
Abstract The paper presents the results and analysis of low-temperature properties of asphalt mixtures according to Thermal Stress Restrained Specimen Test (TSRST) and Indirect Tensile Test methods. Different groups of bitumen were investigated: neat, SBS-modified and highly SBS-modified. Influence of cooling rates (1 °C/h, 3 °C/h, 5 °C/h and 10 °C/h) and additives (aramid fibres and crumb rubber) was identified as well. Moreover, for each factor stiffness moduli were back-calculated from the TSRST results and analysed. The greatest impact on the TSRST results had type of bitumen, followed by the cooling rate and additives. Application of longer fibres improved low-temperature properties of the asphalt mixtures.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (48)
Show source-provided references
1. Ste. Anne test – relationships between predicted fracture temperatures and low temperature field performance
2. Thermomechanical and mechanical behaviour of asphalt mixtures at cold temperature: road and laboratory investigations
3. M. Marasteanu, A. Zofka, M. Turos, X. Li, R. Velasquez, X. Li, W. Buttlar, G. Paulino, A. Braham, E. Dave, J. Ojo, H. Bahia, Ch. Williams, J. Bausano, A. Kvasnak, A. Gallistel, J. McGraw, Investigation of low temperature cracking in asphalt pavements – A Transportation Pooled Fund Study, Report No. MN/RC 2007-43, (2007).
4. A new viscoelastic method of calculation of low-temperature thermal stresses in asphalt layers of pavements10.1080/10298436.2016.1149840 ↗
5. Comparison of low-temperature cracks intensity on pavements with high modulus asphalt concrete and conventional asphalt concrete bases10.1016/j.conbuildmat.2017.04.179 ↗
6. Evaluation of asphalt mixture low-temperature performance in bending beam creep test10.3390/ma11010100 ↗
7. Temperature induced stresses and deformations in asphalt concrete
8. Low temperature cracking in polymer modified binders
9. Low temperature cracking resistance of asphalt concrete mixtures
10. Revising thermal stresses in the TSRST for low-temperature cracking prediction10.1061/(ASCE)0899-1561(2009)21:11(680) ↗
11. Low-temperature performance of SBS-modified asphalt
12. Low-temperature binder specification development. thermal stress restrained specimen testing of asphalt binders and mixtures10.3141/1766-02 ↗
13. Mandal · 2017 · 1
14. A method to estimate the thermal stress build-up in an asphalt mixture from a single-cooling event10.1080/14680629.2013.774756 ↗
15. Comparison of calculated and measured thermal stresses in asphalt concrete10.3846/bjrbe.2015.05 ↗
16. The influence the of mix composition, binder properties and cooling rate on asphalt cracking at low temperatures
17. D. Jung, T.S. Vinson, Low-Temperature Cracking: Test Selection, Strategic Highway Research Program, National Research Council, SHRP-A-400, Washington, DC, (1994).
18. H.K. Kanerva, T.S. Vinson, H. Zeng, Low-Temperature Cracking: Field Validation of the Thermal Stress Restrained Specimen Test, Strategic Highway Research Program, National Research Council, SHRP-A-401, Washington, DC, (1994).
19. Evaluation of pavement temperatures in Poland during winter conditions
20. Effect of cooling rate on thermal cracking asphalt concrete pavements
21. Predicting thermal cracking of asphalt pavements from bitumen and mix properties
22. Effect of cooling rate on the thermo-volumetric, thermo-viscoelastic, and fracture properties of asphalt mixtures
23. Investigation of influence factors on low temperature properties of SBS modified asphalt10.1016/j.conbuildmat.2017.06.118 ↗
24. Influence of asphalt grade and polymer concentration on the low temperature performance of polymer modified asphalt
25. Asphalt pavement cracking: analysis of extraordinary life cycle variability in eastern and northeastern Ontario10.1080/10298430802343169 ↗
26. Investigation of low-temperature properties of recycling of SBS modified asphalt binder10.1016/j.conbuildmat.2017.05.206 ↗
27. A comparison of measured and predicted low temperature cracking conditions
28. Sybilski · 2011 · 1413
29. Evaluation of low temperature properties of rubberized asphalt mixtures10.1016/j.proeng.2017.02.098 ↗
30. Quality and durability of warm rubberized asphalt cement in Ontario, Canada10.3141/2370-04 ↗
31. Asphalt and binder evaluation of asphalt mix with 70% reclaimed asphalt10.1080/14680629.2017.1304259 ↗
32. Effect of select warm-mix additives on thermos-viscoelastic properties of asphalt mixtures10.1080/14680629.2013.774754 ↗
33. Investigation of the low temperature performances of polymer and fiber modified asphalt mixtures
34. EN 13108-1:2016 Bituminous mixtures. Material specifications. Asphalt Concrete (2016).
35. Polish technical guidelines WT-2:2014, General Directorate for National Roads and Motorways, (2014).
36. EN 12591:2009 Bitumen and bituminous binders - Specifications for paving grade bitumens (2009).
37. EN14023:2010 Bitumen and bituminous binders - Specifications framework for polymer modified bitumens (2010).
38. Effect of polymer fibres reinforcement on selected properties of asphalt mixtures10.1016/j.proeng.2017.02.026 ↗
39. Evaluation of the durability and the performance of an asphalt mix involving Aramid Pulp Fiber (APF): Complex modulus before and after freeze-thaw cycles, fatigue, and TSRST tests10.1016/j.conbuildmat.2018.04.103 ↗
40. EN 12697-35:2016 Bituminous mixtures - Test methods for hot mix asphalt - Part 35: Laboratory mixing (2016).
41. EN 12697-33+A1:2008 Bituminous mixtures - Test methods for hot mix asphalt - Part 33: Specimen prepared by roller compactor (2008).
42. K. Kornacka, Evaluation of low-temperature properties of asphalt mixtures based on selected test methods according to standard PN-EN 12697-46, M.Sc. Thesis (in Polish) Gdansk University of Technology, (2017).
43. EN 12697-46: Bituminous mixtures – Test methods for hot mix asphalt – Part 46: Low temperature cracking and properties by uniaxial tension tests, (2012).
44. EN 12697-26:2012 Bituminous mixtures. Test methods for hot mix asphalt. Stiffness (2012).
45. Influence of low-temperature physical hardening on stiffness and tensile strength of asphalt concrete and stone mastic asphalt10.1016/j.conbuildmat.2014.03.011 ↗
46. Reversible aging in asphalt binders10.1021/ef060463b ↗
47. The fracture of bitumen and asphalt mixes by temperature induced stresses
48. Verification of the new viscoelastic method of thermal stress calculation in asphalt layers of pavements