journal article·2019-04

Influence of high volumes of silica fume on the rheological behavior of oil well cement pastes

Jedadiah F. Burroughs, Jason Weiss, John E. Haddock

Publisher page

Abstract

Abstract Specialized classes of concrete, such as ultra-high performance concrete, use volumes of silica fume in concrete that are higher than those in conventional concrete, resulting in increased water demand and mixing difficulty. This study considered the effects of eight different silica fumes in three dosages (10%, 20%, 30%) with three w/b (0.20, 0.30, 0.45) on rheological behavior as characterized by the Herschel-Bulkley model. Results indicated that the specific source of silica fume used, in addition to dosage and w/b, had a significant effect on the rheological behavior. As such, all silica fumes cannot be treated as equivalent or be directly substituted one for another without modification of the mixture proportion. The rheology of cement pastes is significantly affected by the physical properties of silica fume more so than any chemical effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. American Concrete Institute · 2016 · 1
2. Guide for the use of silica fume in concrete
3. SiO2-Stov som cementtilsetning
4. The chemistry of the pore fluid of silica fume-blended cement systems10.1016/0008-8846(90)90095-F ↗
5. Effect of silica fume on the cement hydration of low porosity cement pastes10.1016/0008-8846(91)90175-H ↗
6. Experimental investigation and theoretical modeling of silica fume activity in concrete10.1016/S0008-8846(98)00171-9 ↗
7. The effect of the silica content of silica fume on its ability to control alkali-silica reaction10.1016/S0008-8846(03)00058-9 ↗
8. Mitigation of calcium oxychloride formation in cement pastes using undensified silica fume10.1061/(ASCE)MT.1943-5533.0002052 ↗
9. Russell · 2013
10. Analyzing effects of varied silica fume sources within baseline UHPC
11. Effectiveness of polycarboxylate superplasticizers in ultra-high strength concrete: the importance of PCE compatibility with silica fume10.3151/jact.7.5 ↗
12. Rheology of cementitious paste with silica fume or limestone10.1016/j.cemconres.2007.08.012 ↗
13. Correlating cement characteristics with rheology of paste10.1016/j.cemconres.2007.08.011 ↗
14. Rheological characterisation of cement pastes with nanosilica, silica fume and superplasticizer additions10.1179/174367510X12663198542621 ↗
15. Coupled effects of silica fume and time after water addition on rheology of fresh concrete10.1680/macr.14.00291 ↗
16. C.F. Ferraris, Measurement of the rheological properties of cement paste: a new approach, in: Proceedings of Role of Admixtures in High Performance Concrete, RILEM International Symposium. Monterey, Mexico, 1999.
17. Rheological properties of oil well cement slurries10.1680/coma.2012.165.1.25 ↗
18. Vipulanandan model for the rheological properties with ultimate shear stress of oil well cement modified with nanoclay10.1016/j.ejpe.2017.05.007 ↗
19. Rheological properties of piezoresistive smart cement slurry modified with iron-oxide nanoparticles for oil-well applications10.1520/JTE20150443 ↗
20. ASTM International · 2015
21. ASTM International · 2016
22. ASTM International · 2017
23. ASTM International · 2014
24. ASTM International · 2017
25. Study on the shear thickening effect of superplasticizers on the rheological behaviour of cement pastes containing or not mineral additives10.1016/S0008-8846(00)00330-6 ↗
26. Effects of CSF on strength, rheology and cohesiveness of cement paste10.1016/j.conbuildmat.2012.04.037 ↗