journal article·2019-05

Numerical hygro-thermal analysis of coated wooden bridge members exposed to Northern European climates

Stefania Fortino, Petr Hradil, Andrea Genoese, Alessandra Genoese, Anna Pousette

Publisher page

Abstract

This work presents a numerical model to analyse the hygro-thermal behaviour of wooden bridge members. A multi-Fickian hygro-thermal model, previously implemented by some of the authors, is extended by including the dependency of wood sorption on temperature above and below zero degrees Celsius to predict moisture, temperature and relative humidity in wood under Northern European climates. The performance of the model in the presence of protective paints is particularly investigated. The finite element analysis based on the proposed model simulates the hygro-thermal behaviour of a glue-laminated beam of Älsvbacka Bridge located in Skellefteå (North of Sweden). The beam, coated by paints and claddings, was monitored by using wireless sensors in a previous research. Comparisons with the available measurements reveal that the numerical model is able to predict the moisture content in locations sheltered from rain and sun with moisture levels below the fibre saturation point. A study of the influence of different protective paints shows that the maximum and minimum moisture content at various depths along horizontal paths of the beam cross section, as well as the moisture gradients in different seasonal periods, are strongly affected by the type of paint. The proposed numerical approach is a promising tool to facilitate sensor-based monitoring techniques and to optimize the choice of protective paints for improved performance of timber bridges and other wooden structures under variable climates.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Building materials and conservation · Wood Treatment and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Processing bulk natural wood into a high-performance structural material10.1038/nature25476 ↗
2. Some structural design issues of the 14-storey timber framed building “Treet” in Norway10.1007/s00107-016-1022-5 ↗
3. J. Arfvidsson, E. De Angelis, A. Dodoo, F. Dolezal, L. Gustavsson, A. Hafner, et al., Wood in carbon efficient construction – Tools, methods and applications, M. Kuittinen, A. Ludvig, G. Weiss (Eds.), ISBN: 978-9-0820-9081-9 (e-book), Hämeen Kirjapaino Oy, Finland, 2013.
4. Gustafsson · 2014
5. Wood protection by design – concepts for durable timber bridges
6. Effects of climate and climate variations on strength
7. Mechanical response of wood perpendicular to grain when subjected to changes of humidity10.1007/s00226-001-0130-4 ↗
8. A 3D micromechanical study of deformation curves and cell wall stresses in wood under transverse loading10.1007/s10853-014-8608-2 ↗
9. A 3D moisture-stress FEM analysis for time dependent problems in timber structures10.1007/s11043-009-9103-z ↗
10. Moisture-induced stresses perpendicular to grain in timber sections exposed to European climates10.1016/j.engstruct.2011.06.018 ↗
11. Moisture-induced stresses in glulam frames10.1007/s00107-016-1006-5 ↗
12. Predicting moisture state of timber members in a continuously varying climate10.1016/j.engstruct.2011.04.029 ↗
13. Numerical modelling of the hygro-thermal response of timber bridges during their service life: a monitoring case-study10.1016/j.conbuildmat.2013.06.009 ↗
14. A. Pousette, P.A. Fjellström, Experiences from timber bridge inspections in Sweden - Examples of influence of moisture, SP Technical Research Institute of Sweden, SP Rapport 2016:45, ISBN 978-91-88349-49-1.
15. Moisture monitoring of beam and pylon in a timber bridge
16. Moisture content monitoring of a timber footbridge, “timber bridge moisture”10.15376/biores.11.2.3904-3913 ↗
17. Moisture content monitoring in glulam structures by embedded sensors via electrical methods10.1007/s00226-018-0989-y ↗
18. Finite-element analysis of coupled nonlinear heat and moisture transfer in wood10.1080/10407780600669282 ↗
19. A 3D transient nonlinear modelling of coupled heat, mass and deformation fields in anisotropic material10.1016/j.ijheatmasstransfer.2012.04.009 ↗
20. A 3-D version of TransPore: a comprehensive heat and mass transfer computational model for simulating the drying of porous media10.1016/S0017-9310(99)00098-8 ↗
21. Multi-phase moisture transfer in the high-temperature drying of wood particles10.1016/S0009-2509(97)00197-8 ↗
22. Computational modelling of heat and mass transfer during the high-temperature heat treatment of wood10.1016/j.applthermaleng.2006.10.025 ↗
23. FEM simulation of hygro-thermal behaviour of wood under surface densification at high temperature10.1007/s10853-013-7577-1 ↗
24. Conservative modelling of the moisture and heat transfer in building components under atmospheric excitation10.1016/j.ijheatmasstransfer.2006.06.048 ↗
25. H. L. Frandsen HL, Selected Constitutive models for simulating the hygromechanical response of wood. Dissertation no. 10, Dep. of Civil Engineering, Aalborg University; ISSN: 1901-7294, 2007.
26. Hygro-mechanical analysis of wood subjected to constant mechanical load and varying relative humidity
27. Transient multi-FICKian hygro-mechanical analysis of wood10.1016/j.compstruc.2017.11.012 ↗
28. Krabbenhøft · 2003
29. Abaqus User’s Manual, Version 6.14-5, Dassault Systèmes, 2016.
30. Combined effects of sorption hysteresis and its temperature dependency on wood materials and building enclosures – Part I: Measurements of model validation10.1016/j.buildenv.2016.06.025 ↗
31. Combined effects of sorption hysteresis and its temperature dependency on wood materials and building enclosures – Part II: Hygrothermal modelling10.1016/j.buildenv.2016.06.033 ↗
32. Modeling of moisture transport in wood with hysteresis and temperature-dependent sorption characteristics
33. Monitoring building climate and timber moisture gradient in large-span timber structures10.1007/s13349-014-0083-6 ↗
34. Sorption isotherms of twelve woods at subfreezing temperatures
35. H.L. Frandsen, Modelling of moisture transport in wood – State of the Art and Analytic Discussion. Wood Science and Timber Engineering, Paper no. 1, 2nd ed., ISSN-1395-7953 R0502, Dept. of Building Technology and Structural Engineering, Aalborg University, 2005.
36. Parameter influence on moisture induced eigen-stresses in timbers10.1007/s00107-009-0377-2 ↗
37. Siau · 1995
38. Berge · 2009
39. P. Hradil, S. Fortino, L. Salokangas, A. Musci, G. Metelli. Effects of moisture induced stresses on the mechanical performance of glulam beams of Vihantasalmi bridge. Proceedings of World conference in Timber Engineering (WCTE 2016) conference, August 22-25.2015, Vienna, Austria.
40. On the origin of sorption hysteresis in cellulosic materials10.1016/j.carbpol.2017.11.005 ↗
41. Model evaluation of heat and mass transfer in wood exposed to fire10.1007/s00226-016-0813-5 ↗
42. Moisture content prediction of rain-exposed wood: test and evaluation of a simple numerical model for durability applications10.1016/j.buildenv.2015.11.037 ↗
43. The combined effect of wetting ability and durability on outdoor performance of wood – development and verification of a new prediction approach10.1007/s00226-017-0893-x ↗