Evaluation of the mechanical properties, durability and drying shrinkage of the mortar reinforced with polyacrylonitrile microfibers
Source abstract
Abstract
Abstract In this study, the effect of the addition of polyacrylonitrile microfibers (PAN) on the mechanical properties, durability and drying shrinkage of mortar was investigated. PAN microfibers synthesized by the electrospinning technique were used; the average diameter and length of the microfibers was 1.01 µm and 10–25 µm, respectively. The results of the experimental study indicate that the addition of PAN microfibers enhanced the mechanical properties and some parameters related to durability, and drying shrinkage was considerably reduced. Therefore, reinforcing mortar with PAN microfibers is a viable option to improve the performance of this material and expand its application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. Use of macro plastic fibres in concrete: a review10.1016/j.conbuildmat.2015.05.105 ↗
2. From straw in bricks to modern use of microfibers in cementitious composites for improved autogenous healing - a review10.1016/j.conbuildmat.2015.07.018 ↗
3. Comparative study between natural and PVA fibers to reduce plastic shrinkage cracking in cement-based composite10.1016/j.conbuildmat.2015.05.028 ↗
4. Capillary tension theory for prediction of early autogenous shrinkage of self-consolidating concrete10.1016/j.conbuildmat.2013.12.010 ↗
5. Evaluation of the ultimate drying shrinkage of cement-based mortars with poroelastic models10.1617/s11527-016-0870-0 ↗
6. Drying shrinkage and cracking resistance of concrete made with ternary cementitious components10.1016/j.conbuildmat.2017.05.113 ↗
7. Improved bond behavior between GFRP rebar and concrete using calcium sulfoaluminate10.1016/j.conbuildmat.2016.03.132 ↗
8. Flexural behavior of ultra-high-performance fiber-reinforced concrete beams reinforced with GFRP and steel rebars10.1016/j.engstruct.2015.12.003 ↗
9. A review on the use of fibers in reinforced cementitious concrete10.1177/1528083714529806 ↗
10. Application of chopped basalt fibers in reinforced mortar: a review10.1016/j.conbuildmat.2017.12.245 ↗
11. Pull-out behavior of steel fiber embedded in flowable RPC and ordinary mortar10.1016/j.conbuildmat.2014.11.037 ↗
12. Concrete crack reduction in tunnel linings by steel fibre-reinforced concretes10.1016/j.conbuildmat.2013.02.063 ↗
13. Durability, physical and mechanical properties of fiber-reinforced concretes at low-volume fraction10.1016/j.conbuildmat.2014.09.058 ↗
14. Mechanical properties of glass fiber reinforced ceramic concrete10.1016/j.conbuildmat.2013.10.046 ↗
15. Low-cost glass fiber composites with enhanced alkali resistance tailored towards concrete reinforcement10.1016/j.conbuildmat.2013.03.055 ↗
16. Cementitious building materials reinforced with vegetable fibres: a review10.1016/j.conbuildmat.2010.07.024 ↗
17. Shrinkage Behaviour of Fibre Reinforced Concrete with Recycled Tyre Polymer Fibres10.1155/2015/145918 ↗
18. Mechanical properties and durability of high-strength concrete containing macro-polymeric and polypropylene fibers with nano-silica and silica fume10.1016/j.conbuildmat.2016.11.100 ↗
19. Recycled nylon fibers as cement mortar reinforcement10.1016/j.conbuildmat.2015.01.075 ↗
20. On the reinforcement of cement mortars through 3D printed polymeric and metallic fibers10.1016/j.compositesb.2015.12.006 ↗
21. Mechanical and durability properties of high-strength concrete containing steel and polypropylene fibers10.1016/j.conbuildmat.2015.06.051 ↗
22. Thermo-physical properties of nanostructured lightweight fiber reinforced cementitious composites10.1016/j.conbuildmat.2015.10.188 ↗
23. Mechanical properties of micro and sub-micron wollastonite fibers in cementitious composites10.1016/j.conbuildmat.2015.02.084 ↗
24. Mechanical properties of kenaf fibre reinforced polymer composite: a review10.1016/j.conbuildmat.2014.11.043 ↗
25. A short review on basalt fiber reinforced polymer composites
26. Polypropylene fiber reinforced cement mortars containing rice husk ash and nano-alumina10.1016/j.conbuildmat.2016.02.124 ↗
27. On the mechanical properties and fracture behavior of polyolefin fiber-reinforced self-compacting concrete10.1016/j.conbuildmat.2014.01.024 ↗
28. Effect of acrylic fibres geometry on physical, mechanical and durability properties of cement mortars10.1016/j.conbuildmat.2011.07.061 ↗
29. Hybrid effects of carbon fibers on mechanical properties of Portland cement mortar10.1016/j.matdes.2014.10.015 ↗
30. Application of polyvinyl alcohol (PVA) in cement-based composite materials: a review of its engineering properties and microstructure behavior10.1016/j.conbuildmat.2015.12.188 ↗
31. Recycled plastic waste fibers for reinforcing Portland cement mortar10.1016/j.conbuildmat.2016.09.131 ↗
32. A review: carbon nanofibers from electrospun polyacrylonitrile and their applications10.1007/s10853-013-7705-y ↗
33. Preparation and properties of reduced graphene oxide/polyacrylonitrile nanocomposites using polyvinyl phenol10.1016/j.compositesb.2015.06.009 ↗
34. Nano/micro electro-spun polyethylene terephthalate fibrous mat preparation and characterization10.1016/j.jmbbm.2010.10.014 ↗
35. Synthesis of Polymeric Electrospun Nanofibers for Application in Waterproof-Breathable Fabrics
36. Standard Specification for Concrete Aggregates
37. Standard test method for density, relative density (specific gravity), and absorption of fine aggregate
38. Standard Test Method for Density of Hydraulic Cement
39. Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
40. Standard Test Method for Flow of Hydraulic Cement Mortar
41. Standard Test Method for Compressive Strength of Hydraulic Cement Mortars
42. Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
43. Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
44. Performance of chlorides penetration and corrosion resistance of mortars with replacements of rice husk ash and nano-SiO210.1016/S1452-3981(23)04996-9 ↗
45. Effect of grinding on chemical and physical properties of rice husk ash10.1016/S1674-4799(09)60041-8 ↗
46. Standard test method for measurement of rate of absorption of water by hydraulic cement concretes
47. Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
48. Microwave-assisted rapid fabrication of antibacterial polyacrylonitrile microfibers/nanofibers via nitrile click chemistry and electrospinning10.1002/app.45490 ↗
49. Electrospun polyacrylonitrile microfiber separators for ionic liquid electrolytes in Li-ion batteries10.1016/j.jpowsour.2015.05.022 ↗
50. Portland cement mortar nanocomposites at low carbon nanotube and carbon nanofiber content: a fracture mechanics experimental study10.1016/j.cemconcomp.2016.03.010 ↗
51. TECNOLOGIA DEL CONCRETO Y DEL MORTERO
52. The influence of TiO2nanoparticles and poliacrilonitrile fibers on the rheological behavior and hardened properties of mortars10.1016/j.conbuildmat.2014.11.002 ↗
53. Mechanical performance of self-compacting concrete reinforced with steel fibers10.1016/j.conbuildmat.2013.10.054 ↗
54. Role of water/cement ratio on strength development of cement mortar10.1016/j.jobe.2015.09.003 ↗
55. Effects of polypropylene twisted bundle fibers on the mechanical properties of high-strength oil palm shell lightweight concrete10.1617/s11527-015-0572-z ↗
56. Strain rate dependent properties of ultra high performance fiber reinforced concrete (UHP-FRC) under tension10.1016/j.cemconcomp.2014.10.002 ↗
57. Filho, Compressive stress-strain behavior of steel fiber reinforced-recycled aggregate concrete10.1016/j.cemconcomp.2013.11.006 ↗
58. Axial and lateral stress-strain model for FRP confined concrete10.1016/j.engstruct.2015.04.046 ↗
59. Accelerated corrosion test in mortars of plastic consistency with replacement of rice husk ash and nano-SiO210.1016/S1452-3981(23)11123-0 ↗
60. Effect of polypropylene fiber on durability of concrete composite containing fly ash and silica fume10.1016/j.compositesb.2012.10.006 ↗
61. Mechanical properties and microstructure of multi-walled carbon nanotube-reinforced cement paste10.1016/j.conbuildmat.2014.11.049 ↗
62. Properties of polypropylene fiber reinforced concrete using recycled aggregates10.1016/j.conbuildmat.2015.08.133 ↗
63. Strength and durability of recycled aggregate concrete containing milled glass as partial replacement for cement10.1016/j.conbuildmat.2011.10.061 ↗
64. Effect of sample conditioning on the water absorption of concrete10.1016/j.cemconcomp.2011.05.007 ↗
65. Capillary absorption of structural lightweight aggregate concrete10.1617/s11527-014-0364-x ↗
66. An experimental study of different curing regimes on the mechanical properties and sorptivity of self-compacting mortars with fly ash and silica fume10.1016/j.conbuildmat.2017.03.228 ↗
67. Durability of mortar and concrete made up of pozzolans as a partial replacement of cement: a review10.1016/j.conbuildmat.2016.04.147 ↗
68. Influence of double hooked-end steel fibers and slag on mechanical and durability properties of high performance recycled aggregate concrete10.1016/j.compstruct.2017.08.086 ↗