journal article·2019-08

Brittle failure in the parallel-to-grain direction of multiple shear softwood timber connections with slotted-in steel plates and dowel-type fasteners

Miguel Yurrita, José Manuel Cabrero, Pierre Quenneville

Publisher page

Abstract

Abstract The multiple shear connection with slotted-in steel plates and dowel-type fasteners is a very efficient timber joint for large timber cross sections. It is used in practice, mainly due to its high capacity and its better performance under fire. However, when the number of inner plates is increased, instead of a ductile mechanism, brittle failure may govern its capacity. No standard deals explicitly with this kind of joint. A set of tests has been performed in order to study the brittle failure of this kind of connections. The test results are then compared with the available prediction models that study both ductile and brittle failure modes to assess their prediction accuracy. An improved model for the assessment of the brittle failure mode for the multiple shear connections with slotted-in steel plates and dowel-type fasteners is then proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Wood Treatment and Properties · Structural Load-Bearing Analysis · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. EN12512 · 2001
2. Design method against timber failure mechanisms of dowelled steel-to-timber connections
3. Hanhijärvi · 2008
4. P. Quenneville, P. Zarnani, Proposal for the Connection Chapter of the New Zealand Design of Timber Structures, Unpublished, 2017.
5. EN26891 · 2001
6. Frühwald · 2007
7. Analysis of structural failures in timber structures: typical causes for failure and failure modes10.1016/j.engstruct.2011.02.045 ↗
8. Multiple shear steel to timber joints
9. Large-span timber structures
10. Some structural design issues of the 14-storey timber framed building Treet in Norway10.1007/s00107-016-1022-5 ↗
11. Eurocode 5 · 2004
12. Jorissen · 1998
13. Pedersen · 2002
14. Estimation of shear strength of dowel-type timber connections with multiple slotted-in steel plates by European yield theory10.1007/s10086-006-0800-9 ↗
15. Influence of number of rows of fasteners or connectors upon the ultimate capacity of axially loaded timber joints
16. Performance assessment of existing models to predict brittle failure modes of steel-to-timber connections loaded parallel-to-grain with dowel-type fasteners10.1016/j.engstruct.2018.03.037 ↗
17. Blaß · 2017
18. CSA Standard · 2009
19. Load-bearing capacity of ductile multiple shear steel-to-timber connections
20. P. Quenneville, S. Franke, T. Swager, EXPAN New Zealand Timber Portal Frames Design Guide, Auckland, 2011.
21. AS/NZS 1328.1:1998, Glued laminated structural timber, Joint Technical Committee TM/4, 1998.
22. Assessment of the failure behaviour and reliability of timber connections with multiple dowel-type fasteners10.1016/j.engstruct.2018.05.081 ↗
23. Zarnani · 2013
24. Joint Committee on Structural Safety (Ed.), Probabilistic Model Code, JCSS, 2006.
25. EN408 · 2011
26. EN384 · 2016
27. EN383 · 2007
28. D5764-97a · 2007
29. ISO6891-1983 · 1983
30. Mode cross over and ductility of dowelled LVL and CLT connections under monotonic and cyclic loading10.1061/(ASCE)ST.1943-541X.0002074 ↗
31. General notes on ductility in timber structures10.1016/j.engstruct.2011.07.024 ↗
32. EN338 · 2016
33. Be aware of error measures. Further studies on validation of predictive QSAR models10.1016/j.chemolab.2016.01.008 ↗
34. Kevarinmäki · 2009
35. SP · 1992
36. VTT · 2003
37. Hanhijärvi · 2008