journal article·2019-09

UV-resistant GFRP composite using carbon nanotubes

Rahulreddy Chennareddy, Hesham Tuwair, Usama F. Kandil, Mohamed ElGawady, M.M. Reda Taha

Publisher page

Abstract

Abstract Degradation due to exposure to ultraviolet (UV) radiation is an important durability challenge with glass fiber reinforced polymer (GFRP) composite. Design and construction guidelines of GFRP suggest using UV protection paint to prevent GFRP degradation. In this study we examine the possible use of multi-walled carbon nanotubes (MWCNTs) dispersed in epoxy matrix to produce UV-resistant GFRP composite. We suggest that MWCNTs can result in a significant improvement to UV degradation resistance in the GFRP. Direct tension tests of GFRP coupons incorporating 0.25 wt%, 0.50 wt%, and 1.0 wt% of MWCNTs show inherent stability and good resistance to UV degradation. Microstructural analysis shows the ability of MWCNTs to resist polymer backbone disassociation caused by UV radiation thus preventing UV degradation in GFRP. Scanning electron microscopy (SEM) images show MWCNTs can resist microcracking caused by UV radiation and thus improve UV degradation resistance of GFRP.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Carbon Nanotubes in Composites · Structural Behavior of Reinforced Concrete

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Fiber-reinforced polymer composites for construction-state-of-the-art review10.1061/(ASCE)1090-0268(2002)6:2(73) ↗
2. Behavior of GFRP bridge deck panels infilled with polyurethane foam under various environmental exposure10.1016/j.istruc.2015.10.008 ↗
3. GangaRao · 1995
4. Durability gap analysis for fiber-reinforced polymer composites in civil infrastructure10.1061/(ASCE)1090-0268(2003)7:3(238) ↗
5. Effects of ultraviolet radiation on mechanical properties of glass/polyester composites10.1177/0021998307075441 ↗
6. Effects of ultraviolet radiation and condensation on static and dynamic compression behavior of neat and nanoclay infused epoxy/glass composites10.1177/0021998310394693 ↗
7. Effects of increased solar ultraviolet radiation on materials10.1016/S1011-1344(98)00188-2 ↗
8. Effects of ultraviolet and electron radiations on graphite-reinforced polysulfone and epoxy resins10.1002/app.1984.070290122 ↗
9. Protecting offshore wind farm towers
10. Influence of nanoclay on the durability of woven carbon/epoxy composites subjected to ultraviolet radiation10.1080/15376494.2013.834097 ↗
11. International assessment of research and development of carbon nanotube manufacturing and applications
12. Epoxy functionalized multi-walled carbon nanotubes for improved adhesives10.1016/j.carbon.2013.02.061 ↗
13. Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: a review10.1016/j.compositesa.2010.07.003 ↗
14. Dispersion bonding and orientation of carbon nanotubes in polymer matrices
15. Fabrication and application of polymer composites comprising carbon nanotubes10.2174/187221007779814826 ↗
16. Effects of UV degradation on surface hydrophobicity, crack, and thickness of MWCNT-based nanocomposite coatings10.1016/j.porgcoat.2011.06.015 ↗
17. Methods to assess the impact of UV irradiation on the surface chemistry and structure of multiwall carbon nanotube epoxy nanocomposites10.1016/j.carbon.2013.12.016 ↗
18. Novel UV absorbers prepared from 2, 4-dihydroxybenzophenone and hexachlorocyclotriphosphazene10.1002/app.1993.070501101 ↗
19. Nanoscale particles for polymer degradation and stabilization—trends and future perspectives10.1016/j.progpolymsci.2009.01.002 ↗
20. Polymeric UV stabilizers for thermoplastics
21. Improving fatigue performance of GFRP composite using carbon nanotubes10.3390/fib3010013 ↗
22. Improved strength and toughness of carbon woven fabric composites with functionalized MWCNTs10.3390/ma7064640 ↗
23. Cheap Tubes I. Carbon nanotube epoxy composite. 2017. URL: https://www.cheaptubes.com/contact-cheap-tubes-inc/.
24. G151-10 A. Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources. West Conshohocken, PA, USA.: ASTM International; 2010.
25. G154-16 A. Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials. West Conshohocken, PA, USA.: ASTM International; 2016.
26. Performance of polyester and modified polyester coil coatings exposed in different environments with high UV radiation10.1016/j.porgcoat.2007.01.006 ↗
27. D3039/3039M-14 A. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials. West Conshohocken, PA, USA.: ASTM International; 2014.
28. Synergism effect between modified carbon black and organic ultraviolet absorber in polymer matrix for ultraviolet protection10.1002/app.31775 ↗
29. UV Stabilising Synergies between Carbon Black and Hindered Light Stabilisers in Linear Low Density Polyethylene Films.
30. D3171-15 A. Standard Test Methods for Constituent Content of Composite Materials. West Conshohocken, PA, USA.: ASTM International; 2015.
31. Interlaminar fracture toughness of CFRP laminates incorporating multi-walled carbon nanotubes10.3390/polym7061020 ↗
32. Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites10.1016/j.carbon.2005.01.007 ↗
33. On and off-axis tension behavior of fiber reinforced polymer composites incorporating multi-walled carbon nanotubes10.1177/0021998311422456 ↗
34. Greenhalgh · 2009
35. Fractographic analysis of tensile failures of aerospace grade composites10.1590/S1516-14392012005000141 ↗
36. Functionalization of shortened SWCNTs using esterification10.5012/bkcs.2004.25.9.1301 ↗
37. Functionalization of MWNTs using polyacryloyl chloride and the properties of CNT–epoxy matrix nanocomposites10.1016/j.compscitech.2008.08.011 ↗
38. Synthesis and properties of high-solids hybrid materials obtained from epoxy functional urethanes and siloxanes10.1016/j.porgcoat.2015.02.017 ↗
39. Mechanical and wetting properties of epoxy resins: Amine-containing epoxy-terminated siloxane oligomer with or without reductant10.1016/j.microrel.2010.11.001 ↗
40. Wang · J. Colloid Interface Sci. · 2011 · 359 · 38010.1016/j.jcis.2011.04.004 ↗
41. Attachment of 3-(aminopropyl) triethoxysilane on silicon oxide surfaces: dependence on solution temperature10.1021/la8024827 ↗
42. Environmental degradation of epoxy–organoclay nanocomposites due to UV exposure Part I: Photo-degradation10.1016/j.compscitech.2007.03.004 ↗
43. Effect of carbon black on UV stability of LLDPE films under artificial weathering conditions10.1016/S0141-3910(01)00252-X ↗
44. Towards advanced composite material footbridges10.2749/101686602777965568 ↗