Design of alkali-activated aluminium powder foamed materials for precursors with different particle sizes
Source abstract
Abstract
Abstract Alkali-activated foams (AAFs) were produced using three different precursors with maximum particle sizes of (150, 300, and 500 µm), together with a blend of 70% tungsten mining waste mud (TWM), 20% waste glass (WG), and 10% metakaolin (MK). Aluminium powder (Al) was used as a foaming agent and added first to the dry powders with the mass used varying from 0.1 g to 0.5 g. The effect of using different precursor particle sizes on the AAFs compressive strength, volume expansion and pore size distribution was studied. The results obtained show that by reducing the particle size of the precursor, the foamed materials’ compressive strength increases.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Magnesium Oxide Properties and Applications · Recycling and utilization of industrial and municipal waste in materials production
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. Alkali-activated cements opportunities and challenges10.1016/S0008-8846(98)00093-3 ↗
2. A review: the comparison between alkali-activated slag (Si + Ca) and metakaolin (Si + Al) cements10.1016/j.cemconres.2010.03.020 ↗
3. A review on alkaline activation: new analytical perspectives10.3989/mc.2014.00314 ↗
4. Utilisation of slags for the manufacture of cement
5. J. Davidovite, Synthetic mineral polymer compound of the silicoaluminates family and preparation process (1984) 151–154.
6. I. Beghoura, J. Castro-gomes, H. Ihsan, J. Pickstone, N. Estrada, Expansion volume of alkali activated foamed cork composites from tungsten mining mud waste with aluminium, (n.d.).
7. Alkali-activated fly ashes: a cement for the future10.1016/S0008-8846(98)00243-9 ↗
8. P. Krivenko, Efficiency of alkali activated hybride cements for immobilization of low-level radioactive anion-exchange resins, 10 (2016) 38–43. doi: 10.15587/1729-4061.2016.59488.10.15587/1729-4061.2016.59488 ↗
9. J.D. et al., Early high-strength mineral polymer, United States Pat. (1985).
10. J. Davidovits, Mineral polymers and methods of making them, United States Pat. (1982) 1–6.
11. New cements for the 21st century: the pursuit of an alternative to Portland cement10.1016/j.cemconres.2011.03.016 ↗
12. Davidovits · 2011
13. Development of porous fly ash-based geopolymer with low thermal conductivity10.1016/j.matdes.2014.09.024 ↗
14. Tungsten mine waste geopolymeric binder: preliminary hydration products investigations10.1016/j.conbuildmat.2008.01.003 ↗
15. Investigations on mix design of tungsten mine waste geopolymeric binder10.1016/j.conbuildmat.2007.07.015 ↗
16. Investigations of tungsten mine waste geopolymeric binder: strength and microstructure10.1016/j.conbuildmat.2007.08.003 ↗
17. Adhesion characterization of tungsten mine waste geopolymeric binder. Influence of OPC concrete substrate surface treatment10.1016/j.conbuildmat.2006.10.005 ↗
18. Effects of waste glass on alkali-activated tungsten mining waste: composition and mechanical properties10.1617/s11527-017-1062-2 ↗
19. Preparation and characterization of foamed geopolymers from waste glass and red mud10.1016/j.conbuildmat.2015.03.004 ↗
20. Fabrication and properties of foam geopolymer using circulating fluidized bed combustion fly ash10.1007/s12613-014-0870-4 ↗
21. Microwave synthesis of thermal insulating foams from coal derived bottom ash10.1016/j.fuproc.2014.10.017 ↗
22. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
23. Feasibility of alkali-activated mining waste foamed materials incorporating expanded cork
24. Directed synthesis of alkaline aluminosilicate minerals in a geocement matrix10.1007/s10853-006-0528-3 ↗
25. Achieving a heat resistance of cellular concrete based on alkali activated fly ash cements10.1617/s11527-014-0479-0 ↗
26. Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates10.1016/j.conbuildmat.2009.12.024 ↗
27. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
28. Elevated-temperature thermal properties of lightweight foamed concrete10.1016/j.conbuildmat.2010.07.016 ↗
29. Fresh and hardened properties of lightweight foamed concrete with palm oil fuel ash as filler10.1016/j.conbuildmat.2013.04.015 ↗
30. Silica fume as porogent agent in geo-materials at low temperature10.1016/j.jeurceramsoc.2010.01.014 ↗
31. In situ inorganic foams prepared from various clays at low temperature10.1016/j.clay.2010.10.016 ↗
32. Fly ash porous material using geopolymerization process for high temperature exposure10.3390/ijms13044388 ↗
33. A review of commercially used chemical foaming agents for thermoplastic foams10.1002/vnl.10027 ↗
34. The effect of high fly ash content on the compressive strength of foamed concrete10.1016/S0008-8846(00)00430-0 ↗
35. Fly ash-based geopolymer lightweight concrete using foaming agent10.3390/ijms13067186 ↗
36. A comparison between different foaming methods for the synthesis of light weight geopolymers10.1016/j.ceramint.2014.05.108 ↗
37. Thermal insulating foamy geopolymers from perlite10.1016/j.mineng.2010.07.015 ↗
38. Physical and mechanical properties of lightweight aerated geopolymer10.1016/j.conbuildmat.2015.01.043 ↗
39. Inorganic foams made from alkali-activated fly ash: mechanical, chemical and physical properties10.1016/j.jeurceramsoc.2014.08.024 ↗
40. Adsorption of surfactants on unburned carbon in fly ash and development of a standardized foam index test10.1016/S0008-8846(03)00232-1 ↗
41. Lightweight concretes of activated metakaolin-fly ash binders, with blast furnace slag aggregates10.1016/j.conbuildmat.2009.12.024 ↗
42. In situ inorganic foams prepared from various clays at low temperature10.1016/j.clay.2010.10.016 ↗
43. Durability of inorganic foam in solution: the role of alkali elements in the geopolymer network10.1016/j.corsci.2012.03.002 ↗
44. Fly ash-based geopolymer lightweight concrete using foaming agent
45. Non-autoclaved high strength cellular concrete from alkali activated slag10.1016/j.conbuildmat.2011.06.010 ↗
46. Production and properties of foamed reservoir sludge inorganic polymers10.1016/j.cemconcomp.2013.03.017 ↗
47. Mix design, properties and cost analysis of fly ash-based geopolymer foam10.1016/j.conbuildmat.2015.01.063 ↗
48. Cumulative pore volume, pore size distribution and phases percolation in porous inorganic polymer composites: relation microstructure and effective thermal conductivity10.1016/j.enbuild.2014.11.066 ↗
49. Influence of blowing agent on the fresh- and hardened-state properties of lightweight geopolymers
50. Characterization of geopolymer fly-ash based foams obtained with the addition of Al powder or H2O2 as foaming agents10.1016/j.matchar.2016.01.019 ↗
51. Regulating the chemical foaming reaction to control the porosity of geopolymer foams10.1016/j.matdes.2017.02.026 ↗
52. How does aluminium foaming agent impact the geopolymer formation mechanism?10.1016/j.cemconcomp.2017.03.022 ↗
53. Expansion volume of alkali activated foamed cork composites from tungsten mining mud waste with aluminium
54. Lightweight alkali-activated material from mining and glass waste by chemical and physical foaming10.1061/(ASCE)MT.1943-5533.0002610 ↗
55. Inorganic foams made from alkali-activated fly ash: mechanical, chemical and physical properties10.1016/j.jeurceramsoc.2014.08.024 ↗
56. C. Paper, Characterization of fly ash/metakaolin-based geopolymer lightweight concrete reinforced wood particles, 2016.
57. The use of different by-products in the production of lightweight alkali activated building materials10.1016/j.conbuildmat.2017.01.005 ↗